A Groundwork company - serving Dallas, TX

Schluter Driveway & Pavers in Dallas, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The Dallas Owner’s Guide

We install Schluter-compatible paver driveways and hardscape assemblies across Dallas, and a full paver driveway typically runs $7,000-$18,000 installed, with drainage and edge restraint work quoted line by line. The most common failure we get called about is not a dramatic collapse. It’s a Schluter edge profile (TREP-B, TREP-E, or FINEC) that has lifted, cracked, or separated from the paver field, or a paver course settling over a failed bedding layer in soil that holds North Texas clay moisture. Owners usually spot it as a rocking paver, a gap at the driveway apron, or a trip edge that catches a shoe on the way to the garage. We’re an independent contractor and not affiliated with Schluter, but we spec and install their trim profiles constantly – so if a Schlueter-labeled component on your Dallas driveway has failed, we can match it and replace it.

professional roofing service in Dallas, TX

Call (844) 797-4808

Which Schluter Models This Applies To

Schluter makes several edge and transition profiles that show up on residential paver work in Dallas: TREP-B, TREP-E, TREP-S, and FINEC are the ones we see most on driveway perimeters and step noses. On the drainage side, the KERDI-LINE and larger KERDI-DRAIN bodies show up where pavers tie into a trench drain along a garage apron or a sloped drive. The core match issue is profile height and anchoring leg geometry – a TREP-E is more forgiving; TREP-B seats tighter. Matching the wrong one leaves a lip. Find the printed label and measure the profile height (often 8mm, 10mm, or 11mm) and the anchoring leg width before you order anything.

The OEM vs. aftermarket call: for the visible edge profile, genuine Schluter matching the failed part is usually the right move because the height must line up exactly with the paver thickness. For fasteners and compatible drainage components, we sometimes use quality equivalents if they meet the same spec and finish. On a pavers job in Dallas, salt-and-vinegar short-cuts show up fast in the summer heat and freeze-thaw cycles.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • Lifted or rocking edge profile. The profile leg has pulled free from the substrate or the paver edge broke off beneath it, usually because the base settled.
  • Visible gap along the apron or step nose. Water got behind the restraint and softened the bedding course. Common where a Dallas downspout dumps near the drive.
  • Paver course uneven or heaving. Clay-soil movement in North Texas is real, and a base that wasn’t compacted to depth will telegraph into the pavers.
  • Standing water after a storm. Slope was lost during a prior patch job, and the profile no longer transitions to the drain correctly.
  • Crumbling grout or joint sand. UV and heat have degraded the joint, and the profile now has no support behind it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing the failed edge profile and repairing the surrounding paver course in Dallas typically lands in the same range as a targeted paver repair, with a full paver driveway installation running $7,000-$18,000 and driveway replacement $5,000-$14,000. What drives the number: how many profiles are involved, whether the base has to be re-compacted, and whether drainage has to be repaired at the same time. We quote parts plus labor line by line. Upfront pricing, no surprises – the number you see is the number you pay. Every repair carries our 730-Day Done Right Promise. If the work isn’t right, we make it right.

DIY or Call Us?

A homeowner can safely pull a loose paver to inspect below, check whether the profile is cracked or just shifted, and photograph the label so we can match it. What goes wrong with DIY on pavers in Dallas: reinstalling an edge profile without re-compacting the base, using the wrong profile height so the new edge sits proud, and reburying paver courses over unstable clay without correcting the drainage. You can end up with a trip edge at your garage door. If more than a couple of pavers are involved or the base is soft, call (844) 797-4808. Background-checked, uniformed technicians arrive, and the estimate is free. Calls are answered by a live person 24/7.

FAQs

How long should a Schluter edge profile last on a Dallas driveway? Ten to twenty years on a properly compacted base, but the profile is only as good as the paver bed under it. North Texas clay movement and the summer heat cycle are what shorten the life, not the profile itself. If it’s failing early, the base is usually the culprit. Call (844) 797-4808 for a free on-site look.

Can Schluter edge profiles be repaired instead of replaced? Sometimes, yes. If the profile is intact and only the anchoring leg has lifted, it can often be re-seated after the base is re-compacted. If the profile is cracked or the height is wrong for the paver, replacement is the right call. We’ll tell you which one you’re looking at during the free estimate.

How long does the swap take? A focused profile replacement on a few pavers is typically a same-day job. A larger repair that involves re-compacting base and re-laying a course usually takes one to two days on-site. Most jobs are completed in a single visit once the parts are matched and confirmed.

How do you source the Schluter part for my driveway? We identify the profile from the on-site label and measurements, confirm the height and leg spec, and source the genuine Schluter match through our supplier network. We don’t carry parts on a truck and we don’t claim to be a Schluter dealer – we’re an independent Dallas contractor that installs and repairs Schluter-compatible assemblies correctly. For materials beyond pavers and hardscape, we also service KraftMaid, Cambria, and Silestone lines for the rest of the home.

If a Schluter edge profile or paver detail on your Dallas driveway has failed, call (844) 797-4808 for a free estimate. We’ll identify the part, quote parts and labor line by line, and back the work with our 730-Day Done Right Promise. Built to last, backed in writing. Ten to twelve years of technician experience and a real person answering the phone, 24/7.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch