Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Dallas Owner’s Guide
We build Schluter-compatible home additions and ADUs for Dallas homeowners, and most projects land between $45,000 and $130,000 for the addition work itself. Standard ADU construction in Dallas typically runs $90,000 to $220,000. Permits and plan review mean a planned addition is a scheduled project, not a same-day fix; we start with a free on-site estimate and a written line-item quote.

Schluter Systems isn’t a structural brand. It’s the waterproofing, uncoupling, and edge-protection layer that lives under your tile, at your shower pan, behind your backsplash, and along every expansion joint in a new floor. Owners usually discover a problem the same way: a grout line in the new addition’s bath keeps cracking no matter how many times it’s patched, or a soft spot spreads across floor tile near an exterior door. When the substrate has moved and the Schluter membrane or profile wasn’t set correctly under it, the finished surface above is the part that tells you. We’re an independent contractor and not affiliated with Schluter, which means we match the right membrane and profile to your actual slab, wall assembly, and Texas climate rather than to a catalog page.
Which Schluter Models This Applies To
“Schluter” covers a dozen product families, and which one you have changes the part and the fix entirely. The big ones in Dallas additions and ADUs are DITRA and DITRA-XL (uncoupling membrane for tile over slab or plywood), KERDI and KERDI-BOARD (waterproofing for showers and wet walls), DITRA-HEAT (the heated version), and the finishing profiles like SCHIENE, JOLLY, and RONDEC.
Identify yours by the printed roll edge or mat face: DITRA has a square grid of dovetailed channels; KERDI has a fleece face and a smoother orange look. Profile sizing is the compatibility gotcha most homeowners miss: a trim profile is matched to tile thickness in millimeters, not inches. If your new addition’s bath tile is 9.5 mm thick, an 8 mm profile will not sit flush, and forcing it is exactly what causes the cracked edge trim people call us about.
On the OEM-versus-aftermarket question for Schluter: match the membrane by exact product name and roll width (DITRA comes in 12″ and 39″ widths; KERDI-BAND in 5″ and 7″), and don’t substitute a generic uncoupling mat without reading the specs. The thinset underneath each one is different, and the wrong pairing voids the system. We can source the correct Schluter component for your job as part of the build.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
These are the symptoms we actually see in Dallas additions, along with what’s really going on under the tile.
- Hairline cracks tracking the grout lines. The uncoupling membrane isn’t isolating the tile from slab movement, so the tile takes the stress. In Dallas’s expansive clay soil, a new addition’s slab will move seasonally, and an improperly keyed membrane doesn’t forgive that.
- Hollow tapping under floor tile. Thinset didn’t bond to the mat or the slab, often because the mat was installed over a dusty or damp surface. A hollow sound over a wide area means the tile is sitting on air, not adhesion.
- Recurring moisture at the shower curb or pan edge. KERDI wasn’t lapped and sealed at the seams and corners. Grout discoloration and a musty smell that returns after cleaning point straight to a waterproofing break.
- Edge trim popping loose or the tile chipping at it. A SCHIENE or RONDEC profile set without enough thinset behind the anchoring leg works free over time. This is worst where the profile meets a door jamb or an expansion joint.
- Lippage that appears after the first summer. One tile edge sits proud of its neighbor, months after a flat install. That’s the slab moving under a membrane that wasn’t installed to spec, not a bad batch of tile. Call it in early; tile that’s already cracked can often be corrected before it spreads.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
There’s no flat “replacement” price for a Schluter system inside a larger addition, because the fix depends on how much finished tile has to come up to reach it. Here’s how the numbers break down for Dallas projects. These are the same ranges we quote across every Dallas market, so budget confidently.
| Scope | Installed price range (Dallas) |
|---|---|
| Home Addition (full project, Schluter detail included) | $45,000 – $130,000 |
| ADU Construction (full project) | $90,000 – $220,000 |
| Garage Conversion (into living space) | $30,000 – $80,000 |
| Bathroom Remodel within the addition (KERDI shower, DITRA floor) | $9,000 – $28,000 |
| Walk-In Shower Installation (full KERDI waterproofing system) | $4,500 – $12,000 |
What drives the range on a Schluter-specific correction: how much finished tile and substrate must come out, whether the slab is sound or needs prep first, and whether you’re specifying a premium material. Danby marble in a new Dallas bath has very different movement characteristics than porcelain, and it demands a specific Schluter membrane to stay put. We give you a written line-item quote, upfront pricing with no surprises, and a fixed price before we start, so a membrane fix doesn’t turn into an open-ended bill. Every Schluter detail we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We also carry the same standard on KraftMaid cabinetry, Cambria and Silestone surfaces, and the other brands in our portfolio, so the addition is finished to one consistent spec.
DIY or Call Us?
Some things you can check safely yourself; some you shouldn’t touch. Here’s the honest split.
You can: tap across floor tile to find hollow spots, photograph the printed label on any leftover Schluter roll, measure your tile thickness with calipers, and note where grout cracks keep returning. You can also confirm whether your addition’s plans call for an uncoupling membrane at all.
Skip the DIY here: replacing a KERDI shower pan or re-waterproofing a wall assembly means tearing out finished tile, and getting the seam laps and thinset wrong means the leak comes back in a season. There’s no spring or gas line here, but a failed waterproofing layer quietly rots framing behind the wall, and that’s a repair you don’t want to make twice. If you’ve got recurring moisture, cracking grout, or loose profile trim, call us at (844) 797-4808 and we’ll take a look. That call also gets you our free project estimate and design consult.
FAQs
A properly installed Schluter uncoupling membrane or KERDI waterproofing system should last the life of the tile above it, often decades, because it’s designed to absorb the movement that cracks tile. In Dallas, the failure point is rarely the product; it’s installation over a slab that wasn’t prepped for our expansive clay soil. Call (844) 797-4808 for an on-site assessment; estimates are free.
Sometimes yes. Isolated loose trim profiles or a short run of cracked grout over a sound membrane can often be corrected without a full tear-out. But a membrane that’s failed across a wet area, or thinset that never bonded under a large floor, usually has to come up, because a patch over a broken layer doesn’t hold. We’ll tell you which one you’re looking at after we inspect it.
A localized fix, like resetting an edge profile or replacing a section of membrane and its tile, can be done in a single visit. A full shower pan or floor re-waterproofing is a scheduled multi-day job, because the waterproofing has to cure before tile goes down. We’ll give you a real timeline in your written quote, not an optimistic guess.
We match the exact Schluter product, family and measurement your job calls for and source it through verified suppliers, then install it to spec. We don’t claim to keep parts in stock or on a truck; we bring what your specific job needs. Call (844) 797-4808 and describe what you’ve got; we’ll confirm the match before we order anything.
Whether you’re planning a full addition, finishing an ADU, or correcting a failing membrane detail inside one you already have, we’re ready to talk it through. Our technicians have up to 12 years of experience, calls are answered by a live person 24/7, and every project is backed by the 730-Day Done Right Promise. From foundation to finish line, built to last, backed in writing. Call Groundwork Construction Co. of Dallas at (844) 797-4808 to schedule your free estimate, with upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.