Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Dallas Owner’s Guide
We install and replace Schluter window and door systems in Dallas, and most full unit replacements run $4,500 – $15,000 depending on count and glass package, with impact-rated units in the $8,000 – $25,000 band. Scheduling happens after an on-site measure, not same-day, because every unit is built to opening size. Groundwork Construction Co. of Dallas is an independent installer and is not affiliated with Schluter.

Owners usually discover the problem the same way: a window that won’t latch flush anymore, a door that drags on the threshold in July, or a hairline crack in the frame corner that shows up after a hard freeze. Dallas swings from 105°F summers to teens in winter, and that movement works on frames, gaskets, and hardware year after year. Once water gets behind a failed seal, the damage climbs into the wall cavity fast.
Which Schluter Models This Applies To
Schluter window and door systems are matched by series line and by the label on the frame or the glass spacer. Pull the sash open and look at the jamb face: model and series codes are stamped or stickered there, and the glass unit carries an etched mark in one corner with the makeup and date. Take a photo of both before you call anyone. That photo is what lets us match the correct replacement without a second trip.
The compatibility gotcha most Dallas owners hit: a frame that measures 36 inches rough opening does not mean a 36-inch unit drops in. Schluter lines vary by jamb depth and by whether the unit is new-construction style or retrofit style. Order the wrong one and you’re cutting back stucco or brick to make it fit. Bring us the etched glass mark plus the rough-opening measurement taken at three points, and we can confirm the right part before anything is ordered.
On the OEM-versus-aftermarket call: for glass units and frame components we go OEM or a certified equivalent, because the seal chemistry and expansion rates have to match the original assembly. For hardware – handles, locks, rollers, weatherstrip – a quality aftermarket part is often the smarter buy and costs less. We don’t stock parts and we don’t carry them on a truck; every unit is ordered to your opening after measurement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
- Drafts you can feel at the frame, not the sash. The weatherstrip has compressed or the frame has racked slightly. Dallas heat softens the seal over years, and once it flattens it doesn’t spring back.
- Condensation between the glass panes. The sealed unit’s edge seal has failed and moisture is inside the assembly. No amount of caulking fixes this; the glass unit gets replaced.
- A door that drags or won’t latch in summer. Thermal expansion is moving the slab against the frame. Sometimes it’s hinge and strike adjustment, sometimes the frame itself has shifted.
- Water staining or soft drywall below the sill. The sill pan or flashing has failed and water is tracking into the wall. This one gets worse every rain and needs attention before framing is affected.
- Cracks at frame corners or separation from the wall. Movement between the unit and the rough opening. Common after a hard freeze in North Dallas, and it usually means the sealant and flashing need redoing, not just a cosmetic patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Standard window replacement in Dallas runs $4,500 – $15,000 for a typical whole-home count, and impact-rated window installation runs $8,000 – $25,000. The range is driven by unit count, glass package (impact vs. standard), frame material, and whether we’re pulling stucco or brick back to reset the flashing correctly. A single door or window swap sits at the low end; a full house with impact glass and new trim sits at the top.
| Scope | Installed Range |
|---|---|
| Standard window replacement (whole home) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
That price covers the unit, removal and disposal of the old one, new flashing and sealant, trim, and the labor. It’s upfront pricing, the number you see is the number you pay, and the work carries our 730-Day Done Right Promise. We give written line-item quotes so you can see parts and labor separately. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
DIY or Call Us?
You can safely check a few things yourself: photograph the labels, measure the rough opening at top, middle, and bottom, feel for drafts around the frame, and check for water staining below the sill. What you shouldn’t do is pull a frame out of a brick or stucco wall to “see what’s behind it.” That opens the wall to Dallas rain and lets water into framing before you can get it closed again. Window and door replacement also involves flashing and sealant detailing that has to be done in the right order or the unit leaks no matter how good the part is.
If a unit is cracked, won’t latch, or is letting water in, that’s a call, not a weekend project. Call (844) 797-4808 and a live person answers, day or night. We’ll set up a free estimate and get the right part ordered for your opening.
FAQs
Expect 15 to 25 years for the frame and glass under normal Dallas conditions, with the sealed glass unit often failing first around the 12 to 20 year mark because of the heat cycling. Hardware and weatherstrip wear out sooner, in the 8 to 12 year range. Call (844) 797-4808 for a free assessment of where yours stands.
Often yes. Hardware, weatherstrip, hinges, and locks are repairable, and a failed sealed glass unit can be swapped without replacing the whole frame. Frame cracks, failed flashing, or water in the wall usually point to replacement. The label photo tells us which way it goes. Call (844) 797-4808 for an exact quote, estimates are free.
A single unit is typically done in a few hours, and a whole-home set usually runs one to three days depending on count and wall type. We measure first because every unit is built to opening size, so the install day itself moves quickly. Call (844) 797-4808 to schedule your free estimate.
We match on the model and series code from the frame label plus the etched glass mark, then confirm against your rough-opening measurements. That combination catches the jamb-depth and retrofit-versus-new-construction mismatches that cause wrong orders. No parts are stocked or carried on a truck; each unit is ordered to your opening. Call (844) 797-4808 and we’ll walk you through what to photograph.
We also service KraftMaid, Cambria, and Silestone on other parts of the home. Whether it’s a window, a door, or a full exterior package, from foundation to finish line, Groundwork Construction Co. of Dallas installs it with background-checked, uniformed technicians and backs it in writing. Call (844) 797-4808 for your free estimate.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.