Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Dallas Owner’s Guide
We build and finish home additions and ADU projects around Silestone quartz surfaces, with installed additions in Dallas typically running $45,000 – $130,000 and ADU builds at $90,000 – $220,000. Most owners come to us after a slow failure they didn’t see coming: a countertop or wet-bar surface inside the addition has started to chip at the edge, stain where the sealant wore thin, or pull away from the cabinet line as the structure settles. In a Dallas addition, that surface is usually the first thing to show the stress – and the thing that decides whether the project still feels finished or suddenly feels like a repair list. We check the substrate, the joint lines, and the moisture path before we quote a single part.

Which Silestone Models This Applies To
Silestone is a brand, not a single product, and the “part” here is the quartz surface itself plus the edge profile, backsplash pieces, and sink cutout that fit it. The line matters: Silestone slabs run in standard thicknesses of 1.2 cm, 2 cm, and 3 cm, and the surface series each carry different veining and finish behavior. A 3 cm slab in a Dallas addition handles the wide spans a kitchen island or wet bar needs; a 1.2 cm slab is a cladding or low-traffic surface and will flex if it’s asked to bridge a gap it wasn’t made for.
Identify the right replacement by pulling the fabricator sticker or invoice, measuring the slab thickness at the edge, and noting the cutout dimensions. That sticker is your compatibility key. OEM Silestone slabs are the reliable match for a surface that must blend with an existing run. A quality aftermarket quartz equivalent can work for a standalone piece – a single bar top in a garage conversion, say – but the color and grain won’t match the original run exactly, and in a Dallas addition where two surfaces sit side by side, that mismatch shows. We’re an independent service provider, not affiliated with Silestone; we source what fits and we tell you plainly when the match won’t be clean.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- Chipping along the edge. Direct impact on a hard quartz edge cracks the surface. Silestone resists scratches well, but it’s brittle at a thin edge, and a dropped pan or a chair rail catching a bar top is the usual culprit.
- Staining that won’t lift. Quartz is non-porous, so staining usually means a failed seam or a worn sealant film on an older surface. When a red-wine or oil ring stays, the joint has opened.
- Visible separation at the cabinet line. The slab has pulled away from the base. In a Dallas addition this is often structural – the foundation or framing has moved, and the surface is just reporting it.
- Hairline cracks across a span. A surface bridging more than its span can carry will crack over time, especially at a sink cutout where the quartz is thinnest.
- Lifting or rocking at the seam. A high spot in the substrate lets the slab rock. Dallas soil movement is a common reason a seam lifts months after the install.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, replacing a Silestone surface in an addition runs $2,000 – $6,500 for a countertop-sized piece, and a full wet bar or kitchenette inside the addition can push higher. The broader addition itself is $45,000 – $130,000, and an ADU build is $90,000 – $220,000; a garage conversion lands at $30,000 – $80,000. The surface part is a fraction of that, but it’s the part owners feel every day.
What drives the range: slab size, thickness (3 cm costs more than 1.2 cm), edge profile complexity, number of cutouts, and whether the base is sound. We quote parts and labor separately, so you see the slab cost and the install cost as two lines. The work is covered by our 730-Day Done Right Promise, and the number we quote is the number you pay – no change orders once work starts. Call (844) 797-4808 for a free estimate.
DIY or Call Us?
An owner can safely check compatibility and condition: measure the slab thickness, photograph the fabricator sticker, test the seam with a fingernail, and note whether the surface rocks. That’s information we want from you.
What goes wrong in DIY is the swap. Quartz in an addition is heavy – a 3 cm slab over a bar run is more than two people should lift, and a bad seam on a Silestone surface is permanent once the adhesive sets. Cutting a sink or cooktop hole in a quartz surface without the right blade can crack the slab outright, and that’s a full replacement, not a fix. If the surface isn’t level underneath, gluing it back down makes the crack return. The honest line is this: check, photograph, call. We’ll tell you if it’s a repair or a replace. Call (844) 797-4808 and a live person answers, day or night.
FAQs
Ten to fifteen years is typical for a well-installed, well-maintained surface, though the Texas heat and soil movement can shorten that if the seam or foundation wasn’t sound to begin with. Dallas slab-on-grade homes shift more than the national average, and a surface that was set over an uneven substrate cracks earlier. Call (844) 797-4808 for an exact quote – estimates are free.
Small chips at the edge and hairline cracks can often be repaired with a color-matched epoxy and a polish, and that’s the cheaper path when the slab is otherwise sound. A seam that’s opened, a crack across a span, or a surface that’s rocking usually means replacement. We tell you which one you’re looking at before we quote. Call (844) 797-4808 to schedule your free estimate.
A countertop-sized swap in a completed addition is usually a day of install once the slab is on site, with templating ahead of it and adhesive cure after. Larger runs or a bar with multiple cutouts can take longer. We schedule the install around your household, and most jobs are completed in a single visit. Call (844) 797-4808 to talk timing.
We match the slab to your fabricator sticker and cutout dimensions and source OEM Silestone where a clean match to the existing run matters, or a quality equivalent where a standalone piece allows it. We don’t claim to stock parts or carry slabs on a truck; every piece is ordered to your project. We also work with KraftMaid, Cambria, and Kohler cabinetry and fixtures when the addition needs a coordinated finish. Call (844) 797-4808 for a free estimate with an upfront price.
An addition or ADU in Dallas is a five-figure decision, and the Silestone surface is the finish that makes it feel done. We’ve been building and finishing projects across the area for over 42 years, we put the 730-Day Done Right Promise in writing, and our technicians have up to 12 years of experience on surfaces and structure. Backed by a portfolio of top-tier brands – KraftMaid and Cambria in the finish work, GAF and Owens Corning overhead, Andersen and Pella for windows – we’re the single contractor from foundation to finish line. We’re an independent service provider, not affiliated with Silestone. Call (844) 797-4808 today for your free estimate, and a live person will pick up.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.