Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Dallas Owner’s Guide
Fence installation in Dallas using Tamko-branded materials typically runs $3,500 to $9,000 installed, and we match the right Tamko system to your property before any post goes in the ground. Most Dallas homeowners discover they need this work the moment a gate sags, a picket splits, or a post starts leaning after a storm. The problem rarely announces itself; it shows up as a slow drift you notice one Saturday morning.

Groundwork Construction Co. of Dallas is an independent service provider. We’re not affiliated with Tamko, but we know the product line and match it correctly to your yard, your soil, and your wind exposure.
Key Takeaways
- Installed Tamko fence work in Dallas: $3,500 to $9,000, depending on linear footage, height, and gate count.
- Dallas black clay soil moves. Post depth and concrete set matter more here than in most Texas markets.
- Every job is covered by our 730-Day Done Right Promise.
- Upfront pricing, no surprises. The number you see is the number you pay.
Which Tamko Models This Applies To
Tamko’s fence line is a smaller piece of a much larger building-products catalog, so the first job is confirming what you actually have. Tamko is best known for roofing and waterproofing, and fencing products under the Tamko name tend to be composite or polymer-based systems rather than raw cedar or basic vinyl. Check the post caps, the picket profile, and any stamp or label on the gate hardware. If you find a series name on a cap or rail, photograph it before you call anyone.
Here’s the compatibility gotcha most homeowners miss: rail-to-post brackets are not universal across Tamko systems and their closest aftermarket equivalents. A bracket that fits one rail profile will not seat correctly on another, and forcing it creates the exact wobble you were trying to fix. Measure the rail cross-section, not just the panel width.
The OEM-versus-aftermarket call is real. Original Tamko components give you an exact color and profile match, which matters on a fence that’s visible from the street. Quality aftermarket equivalents can cost less and perform fine, but color drift between a new panel and sun-faded existing panels is common after a couple of Texas summers. On a partial repair we’ll tell you honestly which route looks better on your fence.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
Fence failures in Dallas follow patterns. Here’s what to look for and what’s actually happening underneath.
- Posts leaning after heavy rain. Dallas sits on expansive black clay that swells when wet and shrinks when dry. A post set too shallow or in insufficient concrete will rock with the soil cycle, and no amount of re-leveling fixes it until the footing is redone.
- Gate sag and drag. Gate hardware takes the most load of any part of the fence. When hinges loosen or the gate post shifts, the gate drops and drags. This is usually a footing or hinge-plate issue, not a hinge issue alone.
- Splintered or cracked pickets. UV exposure and Dallas’s summer heat cycle bake moisture out of fence material. Cracking at the fasteners first, then spreading along the grain, points to material fatigue rather than impact damage.
- Loose or popped fasteners. Screws backing out along a rail mean the material is moving. That’s thermal expansion working against a rigid attachment, and it gets worse every season until the attachment method is corrected.
- Rotted or soft wood at ground contact. Even on composite systems, the bottom rail and post base sit closest to splashing water. Soft spots there signal moisture intrusion that will travel upward.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation in Dallas using Tamko-compatible materials runs $3,500 to $9,000 installed. That’s the honest market range, and here’s what moves you up or down inside it.
- Linear footage: The biggest driver. A standard residential lot usually lands in the lower half of the range.
- Height and gate count: Six-foot privacy runs and double gates push toward the top.
- Post footings: Dallas clay means deeper set and more concrete. Skipping this saves money now and costs more in two years.
- Removal and haul-off: Tearing out an old fence adds labor.
- Material grade: OEM Tamko components versus quality aftermarket equivalents.
You get a written, line-item quote before we start. No change orders mid-job, and no surprise line items at the end. The work carries our 730-Day Done Right Promise: if it’s not done right, we make it right. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
DIY or Call Us?
Some things are worth checking yourself. Walk the fence line and note which posts lean, which gates drag, and where fasteners have backed out. Take photos. Look for a label or series stamp on caps and hardware. That information helps us quote accurately, and it costs you nothing.
What goes wrong with DIY is the part people can’t see: the footing. Setting a post in Dallas clay without proper depth and concrete creates a fence that looks fine in March and leans by August. Pulling a gate post to redo it is a two-person job with real injury risk, and cutting corners there is how a small fix becomes a full replacement.
Give us a call at (844) 797-4808 for a free estimate. A live person answers, 24/7.
FAQs
A properly installed Tamko-compatible fence in Dallas realistically lasts 15 to 25 years, with the footing and UV exposure being the two biggest variables. Fences set in shallow footings on black clay tend to fail at the post before the panels wear out. Call (844) 797-4808 for an exact quote on your property.
Often yes, if the damage is isolated to a few panels, a gate, or a single post. If posts are leaning across multiple sections because of footing failure, a replacement usually costs less than repeated repairs. We’ll tell you which one you’re looking at. Call (844) 797-4808 for a free estimate and we’ll walk the line with you.
Most standard residential fence installations in Dallas complete in one to three days, depending on linear footage, gate count, and how many old posts need to come out. Larger properties with multiple gates run longer. Call (844) 797-4808 to schedule your free estimate and get a timeline for your specific yard.
We identify your system by its labels, stamps, and measurements, then source OEM Tamko components or a verified aftermarket equivalent based on what fits your fence and budget. We don’t claim to carry parts on a truck or keep stock on hand; every part is matched to your fence before it’s ordered. Call (844) 797-4808 to get started.
We also work with KraftMaid, Cambria, and Silestone on other projects for Dallas homeowners. Get in touch at (844) 797-4808 for a free estimate on your fence, and our technicians, who bring up to 12 years of experience, will handle it from there.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.