Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Dallas Owner’s Guide
Kitchen remodeling in Dallas using Tamko-compatible materials and products typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop grade, and whether you’re changing the plumbing or electrical footprint. If you’ve landed here because a Tamko product in your kitchen has failed – a warped cabinet box, a delaminating countertop surface, a piece that cracked or pulled loose – you already know most contractors won’t talk to you until you commit to a full remodel. We will. We match the failed component, price the swap honestly, and tie the whole job to our 730-Day Done Right Promise.

Which Tamko Models This Applies To
Tamko makes a wide range of building products, and the kitchen-relevant ones show up in cabinetry, countertop surfacing, and related finish components. The single most important step before you buy any replacement is identifying the exact model or series line printed on the original spec label. That label is usually inside a cabinet door, under a drawer, or on the back panel of the cabinet box. If the label is gone, we measure the cabinet box dimensions (width, height, depth) and the door overlay style, because Tamko cabinetry lines differ in box construction and hinge bore spacing between series. A door that fits one series won’t align on another.
On the OEM-versus-aftermarket question: for Tamko-specific cabinet boxes and door fronts, an OEM match is the only way to guarantee a color and finish match on a partial swap. Aftermarket doors can work structurally, but the sheen and edge profile rarely match a Tamko factory finish under Dallas sunlight. For hardware and hinges, quality aftermarket equivalents are fine and often better. We’re an independent provider – not affiliated with Tamko – so we source genuine components through authorized channels and tell you plainly when an aftermarket part is the smarter call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
Kitchen components fail in predictable ways, and Dallas humidity and heat accelerate most of them. Here’s what to watch for:
- Door fronts that won’t stay aligned. Hinges loosen as particleboard or MDF absorbs seasonal moisture swings. If the door sags and re-tightening the screws won’t hold, the hinge plate is stripping out of the box.
- Swelling or soft spots at the cabinet base. Water from a slow leak or a dishwasher line wicks into the box bottom. Once the board swells, it doesn’t shrink back – the box needs replacing, not patching.
- Countertop surface delamination or bubbling. Laminate and some surfacing products lift at edges when heat and moisture get under the seam. A lifted edge is a fail, not a cosmetic issue.
- Cracks radiating from sink or cooktop cutouts. Cutout edges are the weak point on any countertop. A crack there means the substrate or surface is compromised and will keep spreading.
- Drawer boxes that rack or bind. Slides wear out, but if the box itself is out of square, new slides won’t fix it – the box is the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Dallas homeowners actually pay for the work, installed:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: how many cabinet boxes are being swapped versus the whole run, countertop material and square footage, and whether we’re matching a single Tamko part or opening up the layout. Our pricing is upfront – the number you see is the number you pay, with no change orders sneaking in mid-job. Every project is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.

DIY or Call Us?
Some things you can safely check yourself: measure the cabinet box, locate the spec label, photograph the failed component, and confirm whether the failure is cosmetic or structural. What goes wrong in DIY kitchen work is almost always the same – a homeowner replaces a door or a countertop section without checking that the underlying box or substrate is sound, and the new part fails the same way within a year. Countertop cutouts and cabinet installs also carry real risk of water damage and injury if you’re cutting or lifting alone. Call (844) 797-4808 and we’ll tell you straight whether you need a part swap or a bigger fix – the estimate and design consult are free.
FAQs
How long should a Tamko kitchen component last in Dallas? Most quality cabinet and countertop products last 15 to 25 years in a Dallas kitchen, but heat and humidity shorten that. Cabinets near a dishwasher or sink often show failure in 8 to 12 years if moisture gets in.
Can the failed part be repaired instead of replaced? Sometimes yes. A single hinge, slide, or door front can usually be swapped without touching the rest. If the cabinet box or countertop substrate is swollen or cracked, repair won’t hold and replacement is the honest answer. Call (844) 797-4808 for an exact quote – estimates are free.
How long does the swap take? A single component swap is often done in one visit. A full cabinet run or countertop replacement typically takes a few days depending on fabrication lead time. We’ll give you the timeline in writing before we start.
How do you source the right Tamko part? We identify the model or series from the spec label or measurements, then order through authorized channels to get a genuine match. We don’t guess on finish or fit – we confirm before we order.
Ready to stop guessing and get a real number? Call (844) 797-4808 to schedule your free estimate. A live person answers 24/7, our technicians are background-checked and arrive in uniform, and we also work with KraftMaid, Cambria, and Silestone when you want to compare options. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.