Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Kitchen Remodeling: The Dallas Owner’s Guide
We install ViewLux-compatible kitchen remodeling in Dallas at a typical installed range of $14,000 – $45,000 for a full remodel, with cabinet installation running $4,000 – $13,000 and countertop installation $2,000 – $6,500. Sourcing and scheduling follow the estimate, not the other way around, so the number you approve is the number you pay.

ViewLux owners in Dallas usually discover something has failed the same way: a cabinet door that won’t stay shut, a soft-close hinge that slams, a drawer that drags on one corner, or a countertop seam that has opened up over a Texas summer. You notice it once, then you notice it every single day.
Key Takeaways
- ViewLux-compatible cabinet install in Dallas: $4,000 – $13,000 installed.
- Countertops: $2,000 – $6,500. Backsplash: $800 – $2,500.
- Every project is covered by our 730-Day Done Right Promise.
- Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with ViewLux. We’ll say it plainly once and then get to work.
Which ViewLux Models This Applies To
ViewLux builds cabinet lines in several series, and the hardware spec is where almost every mismatch happens. Older ViewLux cabinet series used a 110-degree standard hinge and a 32mm system bore pattern on the doors, while newer ViewLux lines moved to 105-degree compact hinges with a euro-style cup. If you order the wrong cup depth, the door hangs proud or rubs the frame, and you’ll chase the problem for a month. The model and series are stamped on a label inside the cabinet door and on the back panel of base cabinets. Pull one open and read it before you order anything.
The OEM-versus-aftermarket decision for ViewLux comes down to the door style. If your doors are a discontinued ViewLux series, an exact OEM match may not exist anymore, and a quality aftermarket hinge with the same bore pattern and overlay is the smarter call. We measure cup diameter, door overlay, and the mounting-plate offset before we quote, so the replacement fits the first time. We also service KraftMaid, Cambria, and Silestone kitchens, and the same measurement discipline applies there.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ViewLux Kitchen Remodeling Is Failing
- Doors won’t stay closed or drift open. The hinge tension screw has backed out or the hinge is worn past its adjustment range. On a ViewLux soft-close hinge, the internal damping cartridge is usually the part that’s finished.
- Drawers drag or sit crooked. The undermount slide has bent or the cabinet box has swelled from a Dallas humidity swing. Soft-close slides that pull hard on one side are almost always a bent slide, not a warped drawer.
- Countertop seam is opening. There’s no expansion joint at the seam or the original install skipped the bond, and DFW’s seasonal temperature shift works it loose. A seam that catches a fingernail needs attention before it cracks the slab.
- Caulk line at the backsplash is peeling. The caulk has lost adhesion from heat and moisture near the range. This is a small fix now and a water-damage problem if it’s left alone.
- Sagging or soft cabinet floor. The cabinet bottom or a shelf bracket has failed, often on a ViewLux base cabinet carrying too much cast iron or canned goods. The fix is a reinforced floor or a new base, not a new kitchen.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, an installed price depends on how much of the ViewLux cabinetry is being salvaged versus replaced, the countertop material you pick, and whether the layout changes. Here’s how the line items break down.
| Job | Installed range in Dallas |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range up: premium countertop slabs, an island, and moving plumbing or electrical. What keeps it at the low end: keeping the existing footprint and replacing only the cabinets or hardware. Our estimate is a written line item for parts and labor, and the number you see is the number you pay. The finished work is backed by our 730-Day Done Right Promise, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.

DIY or Call Us?
A few things are safe to check yourself. Open the cabinet and read the model label. Tighten a loosened hinge screw with a Phillips head. Confirm the overlay measurement on your door before you order a hinge. What goes wrong for owners is the step after that: ordering the wrong cup depth, forcing a soft-close cartridge that doesn’t match the plate, or trying to reset a countertop seam without the right clamp and adhesive setup.
And if any part of the job involves cut electrical at the range hood or new plumbing at the sink, that’s not a homeowner project. Call us and we’ll walk you through it.
What we don’t recommend is replacing your own gas range or cutting into a circuit box near the counter. That’s licensed electrician work for a reason. We handle it, and we do the whole kitchen under one contractor.
Call (844) 797-4808 to get your free estimate with a live person, any hour. Most jobs are completed in a single visit, and every technician arrives background-checked and in uniform.
FAQs
Plan on 15 to 25 years for cabinet boxes and door fronts, with hardware and soft-close hinges being the first things to go – usually in 5 to 8 years in DFW’s humidity swings. Call (844) 797-4808 for a free estimate if your hardware is past that mark.
Often, yes. A hinge or a slide can be swapped without touching the cabinet box, and a countertop seam can sometimes be re-bonded. But a swollen cabinet floor or a cracked slab needs replacement – that’s the honest answer, and we’ll tell you which one you’re facing.
Hardware and slide swaps are typically done in a single visit. Cabinet installation or countertop replacement is a scheduled job measured in days, not weeks – your written estimate includes the timeline before work begins.
We read the model and series label inside your cabinet, then measure the hinge cup, door overlay, and mounting-plate offset before we order. If a ViewLux OEM part is discontinued, we match a quality aftermarket equivalent to those exact specs. Call (844) 797-4808 to get started – estimates are free.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.