Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Dallas Owner’s Guide
We install Wellborn-compatible driveway and paver systems across Dallas, with paver driveway installation typically running $7,000 – $18,000 and concrete driveways $4,500 – $12,000 installed. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Wellborn. We schedule most driveway assessments within a few business days, and we answer the phone with a live person, 24/7.

Owners usually find out something’s wrong the same way: a hairline crack in a paver field after a hard freeze, a section of driveway that holds water after every Dallas rain, or pavers that have started to rock underfoot near the garage apron. The concrete or paver base has shifted, and the surface is just reporting what’s happening underneath. Once you see joint sand washing out or a dip forming at the transition, the failure is already a season or two old.
Which Wellborn Models This Applies To
Wellborn’s paver and hardscape line is specified by profile, thickness, and color family, not a single universal model number. For driveway applications, the relevant spec is almost always a 2 ⅜-inch (60mm) or 3 ⅛-inch (80mm) paver profile rated for vehicular loads. A common gotcha we see in Dallas: homeowners order a 60mm paver that matches an existing patio, then discover it’s undersized for a driveway carrying a full-size SUV or a contractor’s trailer. If your original install used the heavier 80mm profile, matching that thickness matters more than matching the color exactly.
Identify your existing paver by lifting one loose corner unit (not a field unit) and reading the stamp on the underside, or measure the thickness with a caliper. Wellborn color families stay consistent across profiles, so a 60mm match to a 80mm field is possible but changes the load rating. OEM Wellborn replacements give you an exact profile and color match but require a full pallet minimum and freight from the manufacturer. Quality aftermarket equivalents in the same thickness and color family install faster and cost less per square foot, but the color may read slightly different at an angle. For a full driveway (not a repair patch), we specify the profile from scratch and match to your home’s exterior palette, which is where our partnership with Belgard and similar hardscape brands makes the decision easier.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
- Joint sand washing out after rain. Dallas clay soil expands and contracts hard, and the sand migrates into the voids. When you reseal twice a year and it still disappears, the base is failing, not the sand.
- Paver rocking underfoot, especially near the apron. The bedding layer has lost compaction. This is the first hard sign the sub-base wasn’t deep enough for Dallas’s shrink-swell clay.
- Standing water for more than 24 hours after a storm. Slope and drainage were set wrong at install, or the base has settled. Puddles in the field mean the grade is off by more than an inch.
- Hairline cracks along the concrete slab under the pavers. If your driveway has a concrete base, this is the base cracking, and pavers on top will continue to move until the slab issue is addressed.
- Efflorescence (white chalky blooms) that keeps returning. Moisture is trapped under the surface. In Dallas, this often shows up after our hot, humid summers when the clay swells and pushes water up through the joints.
Replacement Cost & What’s Included
Installed pricing for Dallas driveways, calibrated to the local market and consistent with every Groundwork page:
| Service | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
The range is driven by square footage, paver profile (80mm runs higher than 60mm), base depth required for Dallas clay soil, and whether the old surface needs full removal or can be overlaid. Our quotes are line-item and fixed. If the base is deeper than expected once we open the driveway, we tell you before we touch it, not after. The work is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely walk the driveway, measure paver thickness at a loose edge, check slope with a level, and test how water puddles after a hard Dallas rain. That diagnostic is worth doing before you call us.

What goes wrong with DIY repair on this part is the base and the compaction. Pulling up a section, re-bedding it, and re-sanding without a plate compactor and proper granular base yields a fix that lasts one Dallas summer. We’ve seen homeowners hand-tamper a repair, save a few hundred dollars, and redo the whole job a year later. Base work on a driveway carrying vehicles is not a weekend job. If your driveway is showing any of the failure signs above, call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free estimate. We answer with a live person, 24/7, and there’s no charge to walk the job and give you a written quote.
FAQs
Wellborn pavers installed over a properly compacted base in Dallas typically last 20 – 30 years for the paver field, with resealing needed every 2 – 3 years due to our heat and clay soil. The failure point is almost never the paver itself. It’s the base. If the base was under-depth for Dallas’s shrink-swell clay, you’ll see failures in 5 – 8 years. Call (844) 797-4808 to schedule a free assessment.
Yes, in many cases. If the failure is confined to a section (a settled apron, a pooling low spot), a targeted repair with matching thickness pavers is possible and typically costs a fraction of a full replacement. If the base failure runs through the field or the concrete slab underneath is cracked, a full replacement is the honest answer. Call (844) 797-4808 and we’ll give you both options with line-item pricing.
Most residential paver driveway replacements run 3 – 5 days, weather permitting, from demo to reseal and final walkthrough. Concrete driveways run 2 – 4 days with cure time before you drive on them. We schedule around your access needs and never leave a driveway open overnight without a safe, marked transition. Call for an exact project timeline.
We measure the existing profile and thickness on site, pull the color family from the stamp or an unopened box if one is on hand, and source through our hardscape brand partners, including Belgard, or from Wellborn directly for exact-match replacements. We do not carry parts on a truck. We order per job, so you get the right profile for a Texas driveway, not whatever’s on a pallet. For a free estimate with the parts spec spelled out, call (844) 797-4808.
We work with Wellborn, KraftMaid, Cambria, and Silestone products across our service lines. Whatever brand is on your home, Groundwork Construction Co. of Dallas brings the same fixed pricing, the 730-Day Done Right Promise, and background-checked, uniformed technicians to the job.
Get a Free Wellborn Driveway Estimate in Dallas
If your Wellborn driveway is showing its age, call (844) 797-4808 to schedule your free estimate. A live person answers around the clock, we walk the driveway with you, and you get a written quote with parts, labor, and warranty terms spelled out line by line. From foundation to finish line, backed in writing, we’re ready to give your Dallas driveway the base it needed in the first place.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.