Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Duncanville, TX: What It Takes and What It Costs
Concrete Driveways & Concrete Work in Duncanville runs roughly $4,500 – $12,000 for a full driveway pour, and a straight replacement of an existing slab lands around $5,000 – $14,000. A standard two-car driveway takes 3 to 5 working days from demo to cure, weather permitting. Call (844) 797-4808 for a free on-site estimate with a written line-item price, and we’ll tell you what your slab needs before anyone swings a sledgehammer.
How We Pour a Duncanville Driveway, Stage by Stage
Concrete isn’t a one-day job, and the days it eats aren’t all the same kind of work. Here’s the sequence we follow on nearly every concrete driveway and flatwork project in Duncanville, with what you’ll be deciding along the way.
Stage 1: Layout, Demo, and Utility Locate (Day 1)
We mark the driveway footprint, confirm slopes and drainage away from the house, and call in utility locates before a single blade hits the ground. On older Duncanville slabs, this is also when we check what’s buried underneath: old sprinkler lines, gas stubs, and sometimes decades-old cast-iron or clay drain runs that feed the city sewer. Demo of the existing concrete usually takes one day for a standard driveway. You’ll decide whether the old apron and approach stay or come out with the rest.
Stage 2: Subgrade Prep and Base (Day 2)
This is the stage that separates a driveway that lasts from one that cracks in eighteen months. We strip the organic material, grade for positive drainage, and compact a crushed stone base. Duncanville’s black clay soil moves with moisture, so base depth and subgrade compaction get more attention here than they would on sand. You’ll decide whether to include a widened parking pad or an extra approach apron while the grade is still open.
Stage 3: Forms, Rebar, and the Final Walkthrough (Day 2, afternoon)
Wood or steel forms go up to the exact width and elevation you approved, then we set the rebar grid on chairs so it sits in the middle of the slab, not on the dirt. We walk the forms with you in person before the pour. This is the last point to move an expansion joint, add a mow strip, or change the slope, and it’s the point where a written, line-item estimate saves everybody an argument.
Stage 4: Pour, Finish, and Control Joints (Day 3)
We pour in one continuous run, then finish the surface with the texture you chose: broom finish, exposed aggregate, or a light salt-and-pepper look. Control joints get cut or tooled at the right spacing to steer cracking instead of letting it wander. If you’ve chosen a decorative finish or stamp pattern, the crew stays on-site through the set.
Stage 5: Cure, Strip, and Backfill (Days 3 – 8)
Concrete keeps curing after the crew leaves. We keep it moist and shaded for the first few days, strip forms once it holds its own shape, and backfill the edges. No driving on it for about 7 days, and no heavy trucks for longer. A full concrete driveway build typically lands in the 3 – 5 working day window, but plan on the cure time before you park on it. For a job that runs into the rest of the yard or a detached structure, see our Driveway & Pavers service.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Once the base is decided, the real decisions are material, finish, and reinforcement. Here’s the honest trade-off on each.
- Plain gray broom-finish concrete – the workhorse. Cheapest per square foot, holds up to Texas sun and freeze-thaw, hides tire marks well, and skid-resists in a rainstorm. It’s the finish most Duncanville driveways use, and for good reason.
- Exposed aggregate – visible stone that grips a wet surface and hides cracks and stains better than smooth concrete. Adds cost and takes longer to finish at the pour. Well suited to a west-facing driveway that bakes in the afternoon sun.
- Stamped or colored concrete – decorative relief that mimics brick or flagstone. Convenient, but the surface is thicker, more expensive, and needs resealing every few years to keep the color even.
- Fiber mesh vs. rebar – fiber mesh helps control hairline shrinkage cracks; rebar adds real structural strength. On Duncanville’s clay, we typically recommend rebar in the grid for anything wider than a standard single drive.
- Board-formed expansion vs. saw-cut joints – saw-cut joints are cleaner and more precise. Board joints hold up when the slab moves more. Both are priced by the linear foot.
What Concrete Driveways & Concrete Work Costs in Duncanville, TX
A concrete driveway installation in Duncanville runs $4,500 – $12,000. A full driveway replacement, including demo and haul-off, comes in at $5,000 – $14,000. A simple concrete sealing job afterward runs $250 – $700. Those ranges hold unless the job hits one of the variables below.
The four things that push a number to the top of the range:
- Size and width – a single-car apron vs. a wide two-car or RV-width drive changes material, subgrade, and labor roughly in step with square footage.
- Existing condition and demo – thick old concrete, a slab that’s failed at the joints, or buried debris all add haul-off and disposal cost.
- What has to move – sprinkler lines, a gas stub, or a drainage tie-in under the old slab add trenching and repair time.
- Finish and reinforcement – exposed aggregate, a stamped pattern, or a rebar grid all add cost per square foot. Plain broom-finish concrete sits at the bottom.
Every written estimate breaks out demo, base prep, reinforcement, pour and finish, and disposal as separate lines. What typically isn’t included: relocating a sprinkler zone you want rerouted, or a foundation issue on the house that a new driveway won’t fix. Call (844) 797-4808 and we’ll price the concrete, not a lump sum.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville’s Older Homes Do to a Concrete Job
Duncanville is a built-out, largely post-war bedroom city, and almost all the concrete work here is renovation, not new construction. The 1950s – 1970s brick-veneer ranch homes across ZIPs 75116, 75137, and 75138 come with original slabs, original approaches, and original drainage. When we replace a driveway on one of these lots, we’re often tying into a decades-old sewer lateral or an early PVC drain line, and the subgrade is the expansive black clay that heaves and shrinks with every wet-dry cycle. That clay is why a slab crack on a driveway often shows up in the same season as a foundation crack on the house. If the job turns into a full Driveway & Pavers in Duncanville project, we plan the drainage as one system, not two.
Work on these lots also hits modern permitting for the first time. If your driveway project pulls in a slab repair or a widening that touches the right-of-way, expect the city to want to see what the tie-in looks like, and expect any new electrical work near an original panel to get a second look. None of that is a surprise if it’s priced before the pour starts. Our technicians have up to 12 years of experience with exactly these tie-ins, and we cover the whole of Duncanville on that basis. Homeowners often pair a new driveway with Garage Conversion ADU in Duncanville work, or with a New Detached ADU in Duncanville build that needs a fresh apron and walkway at the same time.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Duncanville
A standard two-car concrete driveway takes 3 – 5 working days from demo to final cure, plus about 7 days before you should park on it. Rain and subgrade surprises are the two things that stretch that window. Call (844) 797-4808 for a timeline specific to your lot.
Often yes, especially if the work touches the right-of-way, the approach apron, or any structure on the slab. We pull the permits and handle inspections as part of the estimate. Call us for a quick read on your specific project before you budget.
Only when the old slab is sound, level, and has no failed joints, which is uncommon on Duncanville’s older concrete. On 1950s – 1970s slabs we almost always remove and replace so the base can be graded correctly. Call (844) 797-4808 and we’ll tell you which case you’re in.
No. A driveway is a separate slab, and it can’t arrest the movement of a house foundation on the black clay. We flag any foundation concern we see during demo so you can address it before the new concrete goes down. Call us for a free assessment.
Every project is covered by our 730-Day Done Right Promise, so if the workmanship isn’t right, we make it right. Material warranties on the concrete mix and reinforcement pass through to you in writing. Call (844) 797-4808 to schedule your free estimate.
Ready for a Real Number on Your Driveway?
We give free on-site estimates for concrete driveways and concrete work across Duncanville. On the call we’ll ask what you have now, how wide you need it, and whether anything has to move. Then a technician walks the lot, checks the subgrade and utility tie-ins, and hands you a written, line-item quote with the price locked in. No change orders, no surprises. Call (844) 797-4808.
Written by the team at Groundwork Construction Co.