A Groundwork company - serving Dallas, TX
Custom & Geometric Windows in Addison, TX | Groundwork Construction Co. of Dallas

Custom & Geometric Windows in Addison - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Custom & Geometric Windows in Addison: What to Expect

Custom & Geometric Windows in Addison generally run $6,500 – $22,000 depending on shape complexity, glazing package, and how many openings you’re replacing. A single arch-top or trapezoid unit in a restaurant or apartment common area typically takes two to three weeks from template to install; a full set across a multifamily rehab runs six to eight weeks. Addison is built-out (ZIP 75001), so almost every job here is a commercial or multifamily retrofit squeezed between shared parking and Belt Line Road traffic. Call (844) 797-4808 for a free on-site estimate.

Call (844) 797-4808

How we run a custom & geometric window project from template to final inspection

The sequence matters more on geometric work than on any standard replacement. Curved and angled units aren’t sitting on a shelf, so every stage has to happen in the right order or the schedule doubles.

Stage 1: Site survey and shape assessment (day 1, 2 – 3 hours). We measure the rough opening, check the existing frame for square and plumb, and photograph the reveal. On Addison restaurant and apartment projects, this is also where we record parking access, loading windows, and whether a lift or ladders will work. You decide at this stage whether we’re matching the existing geometry or rebuilding the opening.

Stage 2: Design and templating (days 3 – 10). For true radius, eyebrow, and trapezoid openings, a physical template or a laser-measured digital file goes to the manufacturer. You choose glazing (tempered, laminated, low-E), frame material, and finish color. This stage drives the lead time.

Stage 3: Ordering and permitting (weeks 2 – 4). Units get fabricated to the template. Simultaneously, we submit through the Town of Addison building department. Commercial and multifamily openings fall under different review than residential work, so plan for a review window rather than a same-week approval.

Stage 4: Demo and install (1 – 3 days per opening). We remove the existing sash and frame, prep the opening, set the new unit, shim and shim-check, flash the perimeter, and seal. Geometric units are heavier and harder to maneuver, so installers work in pairs and often need a clear staging area near the opening. On tight sites, that staging means a reserved parking bay or an alley approach.

Stage 5: Inspection and punch list (day after install). Final seal check, operation test on any operable sections, and a walk-through with you. If inspection is required, we meet the inspector on site.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The options you’ll choose between for geometric and custom windows

Most of the decisions happen in stages 2 and 3. Here’s what actually moves the product:

  • Frame material. Aluminum is the standard for commercial storefronts and multifamily common areas because it takes powder-coat finishes and large spans; the trade-off is thermal performance, which needs a thermal break in North Texas summers. Vinyl handles simpler shapes at lower cost but struggles with large radii and dark colors. Wood-clad gives the best look on historic-feel facades and costs the most.
  • Glazing package. Low-E with argon is the baseline for anything facing south or west; laminated glass adds impact and security performance, which matters on ground-floor openings. Simple clear glass is the cheapest and the wrong choice on a 100°F+ summer elevation.
  • Shape complexity. A half-round or arch-top is straightforward. Eyebrow, trapezoid, triangular, and full-circle units require true custom fabrication and cost meaningfully more per square foot.
  • Operable vs. fixed. Fixed units cost less and seal better. Operable awning and casement sections in custom geometry add hardware cost and a maintenance point.
  • Finish. Powder-coated aluminum, anodized, or painted wood. Dark bronze and black powder coat are the most common choice around Belt Line Road; custom color matching adds lead time and cost.

We work with manufacturers including CWS, CGI, and ES Windows on custom and commercial-grade product, and can specify any of them based on the shape, span, and performance target you’re after.

What Custom & Geometric Windows costs in Addison, TX

Plan on $6,500 – $22,000 for a typical Addison project, with larger multifamily or restaurant scopes running higher. That’s the market range in this ZIP for combined product and installation.

The variables that push a job to the low or high end:

  • Number and size of openings. A single arched transom runs near the bottom of the range; a storefront with three custom units plus surrounding standard windows sits at the top.
  • Shape complexity. Straight-line custom sizes are the cheapest “custom” work. True radii, trapezoids, and multi-panel geometry add 25 – 50% to per-unit cost.
  • Existing frame condition. Rotted or out-of-square frames mean rebuilding the rough opening before a new unit can go in. That’s framing labor, not window cost, and it’s the most common surprise line.
  • Glazing and finish grade. Standard low-E vs. laminated impact-rated glass, and stock bronze vs. custom color, move the number in opposite directions quickly.
  • Access and staging. On Addison’s tight shared-parking sites, lift rental, after-hours work windows, and traffic control add cost that a suburban driveway job never sees.

A written line-item estimate from us covers the units, templating, removal, installation, flashing and sealant, and the permit. It does not typically cover structural reframing discovered after demo, or interior repair and paint around the opening beyond basic trim. We call out those possibilities up front so the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Addison buildings specifically do to this job

Addison is an almost entirely built-out commercial and multifamily enclave, so custom and geometric window work here is usually retrofit work on 1970s – 1980s low- and mid-rise buildings along Belt Line Road and Addison Road, not new construction. That means every project goes through the Town of Addison building department, and multifamily and restaurant openings don’t always follow the same review path as a single-family replacement. Tight, shared-parking sites add a real constraint: on the Belt Line corridor, we plan loading and staging before the units even ship, because there’s no side yard to leave a crate of glass.

The buildings we most often see have envelope details that have aged through 40-plus years of 100°F+ summers and occasional freeze events. Framing out of square, failed perimeter sealant, and condensation between panes on south- and west-facing elevations are the standard failure modes. Interior commercial renovation and apartment repositioning drive most of the work, which also means finish-out deadlines and tenant schedules shape the plan. We cover all of Addison and coordinate around your tenants, your parking, and your hours.

Serving Addison, TX – Our Local Coverage Area

We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked: Custom & Geometric Windows in Addison

Get a free on-site estimate for custom & geometric windows in Addison

Call (844) 797-4808 and a live person answers, day or night. We’ll set an on-site visit, measure and template your openings, and hand you a written line-item estimate with the permit, install, and product cost spelled out. No change-order surprises. If your job grows into a wider scope, that’s a conversation for our Windows & Doors in Addison page; if you’re refreshing a whole facade around the project, homeowners often pair this with Concrete Driveways & Concrete Work in Addison. For the full range of what our Windows & Doors team handles across the metro, see the service hub.

Written by the team at Groundwork Construction Co.

Why Addison Chooses Groundwork Construction Co. of Dallas

We set the standard for custom & geometric windows in Addison.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Addison

Getting your custom & geometric windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your custom & geometric windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local custom & geometric windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Addison Customers Say

Trusted by homeowners across Addison and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Custom & Geometric Windows in Addison?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Addison.

(844) 797-4808

Request a Free Estimate in Addison

Tell us about your custom & geometric windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch