Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Dallas, TX
Custom and geometric windows are built to a specific shape and size rather than pulled from a standard catalog: arches, half-rounds, trapezoids, triangles, circles, octagons, and full wall systems that follow a roofline or frame a view. Homeowners in Dallas need them for two main reasons. The first is architectural: a Tudor, a Mediterranean revival in Lakewood, or a mid-century modern in Casa Linda has an opening no stock unit will ever fill cleanly. The second is performance: a big custom window in a Dallas house has to survive 100-degree summers, hail season, and the occasional hard freeze without fogging, leaking, or warping. We install both kinds of projects, from a single arched transom over a front door to a curved window wall across the back of a house.
Groundwork Construction Co. of Dallas handles custom and geometric windows as part of our broader Windows & Doors work. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise. If a window isn’t right, we make it right. That matters more with custom units, because a shape that gets templated wrong is not something you can swap off a shelf. Call (844) 797-4808 and a live person answers, 24 hours a day, to start a free estimate.
Key Takeaways
- Custom and geometric windows are made to your opening’s exact dimensions and shape, so nothing gets blocked off or filled with trim to hide a gap.
- Most Dallas homes that need them have non-rectangular openings: arched entries, angled gables, bay and bow setups, or round accent windows.
- Expect to pay more per unit than for stock windows, mainly because of templating, fabrication lead time, and the odds of a second fitting visit.
- Material choice is a Dallas decision as much as a style decision. Vinyl, aluminum, and fiberglass all behave differently in our heat, sun, and hail.
- Measure twice, order once. The measurement and template step is where custom window projects succeed or fail.
When You Need Custom & Geometric Windows
These are the situations we run into most often in Dallas. If one of them sounds familiar, a custom unit is usually the honest answer rather than a workaround.
- Your opening isn’t rectangular. Arched front entries, half-round windows above a door, and windows that follow a sloped roofline in a gable are all common in older Dallas neighborhoods. A stock window plus filler framing tends to look patched from the street, and it often leaks at the joints within a few years.
- A window has failed and can’t be re-ordered. Plenty of Dallas homes from the 1950s through the 1980s have odd sizes that no current manufacturer makes as a standard size. If a unit is fogged, cracked, or rotted past repair, custom fabrication is often the only way to match the existing opening without rebuilding the wall.
- You’re building an addition and the new wall has an angle. Bay windows, bow windows, corner windows, and angled walls on additions create openings with no off-the-shelf answer. Getting the glass fabricated to the wall instead of building the wall around the glass keeps the exterior clean and the interior trim simple.
- You want a feature, not just a hole in the wall. A round or octagonal window on a stair landing, a large picture window with a shaped top on a rear wall facing a yard, or a transom that carries a curve across a great room. Dallas homes with tall ceiling lines and big rear walls are where these read best.
- Hail has taken out a shaped or oversized unit. Insurance often covers custom windows after a storm. We document the damage, give you an upfront price, and coordinate the replacement so the new unit matches the original profile.
- You’re renovating a historic or period home. Lakewood, Swiss Avenue, and Munger Place all have homes where the window profile is part of the character. Replacing a curved or shaped window with a flat rectangular unit changes how the whole facade reads.
In every one of these cases, a custom window is a commitment. It has to be templated, fabricated, and fitted. That’s why the process matters as much as the product, and why we walk you through all of it before anyone orders anything. For a wider look at standard replacements and patio doors, see our Dallas service area page.
Our Custom & Geometric Windows Process
Custom windows fail for predictable reasons: bad measurements, wrong material for the exposure, or a fabrication shop that ships a shape that doesn’t match the template. Our process is built to close those gaps before money changes hands.
- Site visit and honest scope. We come out, look at the opening, and tell you whether a custom unit is really necessary or whether a standard window with proper framing will do the job better and cheaper. You get a free project estimate and design consult, and a live person is on the line when you call, day or night.
- Precise measurement and templating. This is the step that decides everything. For curved and angled openings we template the actual shape on site, not just a width-and-height number. Corners, sill lines, and the plane of the wall all get checked, because a 1/8-inch error on a straight window becomes a visible gap on a curve. We measure the rough opening, confirm the depth, and note how the new unit will tie into the exterior cladding and interior trim.
- Material and brand selection. We work with a curated set of window partners, including CGI, CWS, and ES Windows, and match the material to the wall and the exposure. Vinyl handles Dallas heat well and keeps cost down. Aluminum gives you slimmer sightlines on large custom shapes where the framing has to carry more weight. Fiberglass holds its shape across big temperature swings. The brand choice follows the shape and size, not the other way around.
- Fabrication and lead time. Custom units are built to order. We place the order, confirm the fabrication drawings, and give you a realistic delivery window up front so you’re not guessing. Standard-size custom units move faster than large geometric ones, which often need extra fabrication review.
- Installation with a background-checked, uniformed crew. On install day, the opening is prepped, flashing is done correctly (this is where most leaks start), and the unit is set, shimmed, sealed, and finished. We treat the exterior weather barrier as the whole point of the job, not an afterthought.
- Final walkthrough and warranty handoff. You walk the work with us. We check operation, seals, and finish on every unit. All of it is covered by the 730-Day Done Right Promise, and if something isn’t right, we come back and fix it.
Most single custom window installs happen on one visit. Larger geometric projects, like a curved window wall or a full set of arched units across a facade, usually run across install days plus the fabrication lead time before them. Upfront pricing means the number you see is the number you pay, with no surprise line items after the crew is on site.
If you’re also replacing standard windows or a patio door at the same time, we can bundle the work so you’re not paying for two mobilization visits. Call (844) 797-4808 and we’ll scope it together.
Custom & Geometric Windows Pricing in Dallas
Custom and geometric window pricing in Dallas runs higher than stock replacement because every unit is fabricated to a template, and the odds of a return visit for a final fit are higher than with standard sizes. Typical installed ranges look like this:
| Project | Typical Installed Range |
|---|---|
| Single custom rectangular window (non-standard size) | $650 – $1,400 per unit |
| Arched or half-round transom window | $900 – $2,000 per unit |
| Triangular, trapezoidal, or angled gable window | $1,100 – $2,400 per unit |
| Round, oval, or octagonal feature window | $1,200 – $2,800 per unit |
| Large picture or shaped picture window (oversized glass) | $1,800 – $4,500 per unit |
| Bay, bow, or corner window system | $3,000 – $9,000+ per system |
| Curved or geometric window wall (multi-unit) | Quoted per project, often $8,000 – $25,000+ |
Those are ballpark installed numbers for planning, not a bid. What you actually pay depends on a few concrete things:
- Shape complexity. Straight rectangles in odd sizes are the least expensive custom option. True curves, compound angles, and multi-radius arches cost more because the fabrication is slower and the scrap rate is higher.
- Glass package. Low-E coatings, argon fill, laminated glass, and impact-rated glass all add cost. In Dallas, impact-rated or laminated glass is worth pricing seriously given hail season. It costs more up front and can reduce storm-replacement pain later.
- Frame material. Vinyl is generally the least expensive, aluminum and fiberglass cost more, and wood-clad units cost the most. The right choice depends on the shape, the size, and how much sun the wall takes.
- Size and weight. Very large units need heavier framing, more crew, and sometimes a lift. That’s labor and equipment, and it shows up in the price.
- Wall access and height. A second-story arched window over a steep roof costs more to install than a ground-floor unit. We tell you that before we start, not after.
- Trim and finish. Interior casing and exterior trim around a custom shape take more time and skill than a square opening.
Every project gets a free estimate and design consult, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. For a custom window project that lands over that threshold, the discount comes off the upfront price, not off a marked-up one. If you want a real number for your opening, call (844) 797-4808. A live person answers around the clock.
FAQs – Custom & Geometric Windows
How much do custom and geometric windows cost in Dallas?
Most single custom and geometric windows in Dallas run between roughly $650 and $2,800 installed, depending on shape and size, with large picture units, bay systems, and window walls running considerably higher. The biggest cost drivers are shape complexity, glass package, frame material, and how hard the opening is to reach. Call (844) 797-4808 for an exact quote on your opening, the estimate is free.
Can you replace a curved or shaped window without rebuilding the wall?
Yes, in most cases. If the existing opening and framing are sound, a custom unit fabricated to the opening’s template goes into the same hole. The wall only needs rebuilding when the framing is rotted, the rough opening is out of square, or the new window is a different size or shape. We check all of that on the site visit before you commit to anything.
How long does it take to get a custom window made and installed in Dallas?
Custom windows are built to order, so plan on a fabrication lead time before installation. Standard-size custom units move faster than large geometric or curved units, which often take longer because of fabrication review. The install itself is usually a single visit for one unit, or a few install days for a full geometric set. We give you a realistic timeline up front so you’re not guessing.
Is it cheaper to repair or replace a failed custom window in Dallas?
Repair is often cheaper when it’s a single failed component, like a broken sash, a failed seal, or a bad hinge, and the glass and frame are still sound. Replacement is usually the better call when the unit is fogged between the panes, the frame is warped or rotted, or the original manufacturer no longer supports it. A custom replacement costs more than a stock one, so it’s worth getting an honest repair-or-replace read before ordering anything. Call (844) 797-4808 and we’ll tell you which one makes sense.
Why Dallas Homeowners Call Groundwork Construction Co.
Dallas is hard on windows. Summer sun bakes the west and south walls, hail comes through in the spring, and the occasional deep freeze tests every seal. Custom and geometric windows take the hit on the glass and the frame, and a unit that isn’t fabricated and set correctly will show it fast. We screen for that in the first visit. You get a free estimate and design consult, upfront pricing with no surprises, and a crew that shows up background-checked and in uniform rather than out of an unmarked van.
The 730-Day Done Right Promise is one of the longest workmanship guarantees in residential construction, and it covers custom window installs the same way it covers every other job. If a unit isn’t right, we make it right. That’s the whole point of hiring a contractor who puts it in writing.
If you’re planning custom or geometric windows in Dallas, call (844) 797-4808 for a free estimate. A live person answers 24 hours a day, 7 days a week. No voicemail, no waiting until Monday. For our full home service offering, see the rest of the site.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas.