Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Irving, TX: What the Job Actually Involves
Custom and geometric windows in Irving, TX typically cost $8,000 – $25,000 for a full-house project, with shaped units (arches, half-rounds, trapezoids, circles) running higher per opening than standard rectangles because every frame is templated to the actual rough opening. Most whole-home packages take three to five weeks from final measurement to trim-out, and single feature windows (a stairwell arch, a gable triangle) run three to seven days. Call (844) 797-4808 for a free on-site estimate.
How a Custom & Geometric Window Project Runs, Stage by Stage
Shaped and custom windows aren’t a one-day swap. The sequence matters because a templated arch or a trapezoid gable window can’t be returned to a factory if the rough opening is off by a quarter inch. Here’s the real order of operations, with what you decide and when.
Stage 1: Site assessment and template (day 1, roughly 2 – 3 hours). We measure every rough opening, photograph the framing, and check the existing wall assembly for rot, settling, or out-of-square jambs. On Irving homes this is where we often find the surprise: a 1960s ranch in South Irving whose header has sagged half an inch over the clay-soil cycle, or a Las Colinas townhome with a masonry veneer that needs a different attachment detail. You decide the window style here: arch, half-round, ellipse, trapezoid, or a geometric combination. We confirm which openings can be templated as-is versus which need framing correction first.
Stage 2: Order and lead time (days 2 – 20 depending on maker and finish). Custom shapes go into production. Standard rectangular flankers ship faster than true geometric units. You choose glass package (low-E, impact-rated, or a mix), frame material (wood-clad, vinyl, aluminum-clad), and interior finish. This is the longest waiting period in the job, and it’s the stage that most often slips if you change a specification after the order goes in. Decide glass and finish before we place the order, not after.
Stage 3: Prep and framing (day 1 of install, 4 – 8 hours). We remove the old units, inspect and repair the rough openings, correct out-of-square framing, and flash the openings. For geometric windows, template alignment is checked against the wall before the unit goes up. On second-story or steep-gable installs this is where the lift equipment and safety plan come in. You don’t decide anything here except approving any framing repair we find behind the wall – we bring you the photo and a fixed number before we proceed.
Stage 4: Setting and flashing (days 2 – 4, 1 – 2 hours per opening). Windows are set, shimmed, plumbed, and flashed to the wall assembly. Geometric units get extra attention at the curved head and sill because that’s where water intrusion starts if the flashing is wrong. On Irving’s wind-exposed corridors (more on that below), we seal and back-flash the perimeter to hold against a hard North Texas gust front.
Stage 5: Trim, finish, and walkthrough (days 5 – 7, 3 – 6 hours). Interior and exterior trim are fitted to the curved or angled shape, caulk joints are finished, and we walk the job with you. You approve the trim profile and finish. Any punch items get scheduled before we close the ticket. The whole package is covered under our 730-Day Done Right Promise – if it’s not right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Custom and geometric windows give you a lot of spec decisions up front. Here’s what each one really costs you in money and in how the window performs over the next twenty years.
- Frame material. Wood-clad (pine core, aluminum or vinyl exterior) holds a crisp shape on arches and trapezoids and paints beautifully – it’s the choice for most Las Colinas and Valley Ranch homes where the shape is the point. Vinyl is the value pick and the weather-beater, but vinyl arches are limited in radius, so a tight curve may force you to wood-clad. Aluminum-clad is the durable middle ground for Dallas-area UV exposure.
- Glass package. Standard low-E dual-pane is fine for most Irving homes. If you’re near the SH-114 corridor, a wind-rated or impact-rated glazing adds $150 – $400 per opening but pays back in storm resilience – the same wind that damages a garage door can pop a large plate-glass geometric unit. We’ll quote both so you can compare.
- Shape complexity. A half-round or arch over a door is straightforward. A true circle, ellipse, or custom trapezoid costs more because the frame and glass are individually tooled. Expect to pay a premium on any opening that isn’t a standard rectangle.
- Interior wood species and finish. Painted pine is the budget-friendly option; stained oak, or a pre-finished clad interior, adds cost but holds character on interior arches.
- Exterior trim and casing. Coordinating the exterior trim to the shape matters – a curved arch needs a matching curved casing, which is a custom millwork line item.
We specify brands we know hold up in North Texas – Andersen and Marvin for both standard and shaped units. The point isn’t a name list; it’s that you choose a window built for the shape and the climate, not the cheapest thing that fits the hole.
See the difference
Before
After
Before
After
Before
AfterWhat Custom & Geometric Windows Cost in Irving, TX
Plan on $8,000 – $25,000 for a full-house custom and geometric window project in Irving, with feature installations (a stairwell arch, a gable triangle, a set of trapezoids) running $2,500 – $7,000 per opening. Those ranges are market-calibrated for Irving, not a national average. Call us at (844) 797-4808 for a written, line-item estimate – the number you see is the number you pay.
What moves the number:
- Number and size of shaped openings. A custom unit at a large scale uses more glass and more frame material. Interior arches and load-bearing trapezoids cost more than a simple radius.
- Glass and frame grade. Impact-rated or energy-efficient glazing and wood-clad frames add 20 – 40% over standard vinyl with basic glass.
- Framing and rough-opening condition. If we find rot, settled headers, or out-of-square framing on an older Irving home, the repair is a line item. We always price it before we touch it, never after.
- Interior trim and finish. A stained hardwood interior on a curved arch is a real cost; painted pine is not. Custom curved casings are a separate millwork line.
- Permit and inspection scope. Any structural alteration, opening resizing, or addition to an existing wall opens the permit requirement. More on that in the local section.
Included in a written estimate: measurement and templating, removal of existing units, framing correction we can see, window supply, flashing and sealing, interior and exterior trim, and cleanup. Not typically included: structural re-engineering if an opening is moved, replacing damaged wall sheathing discovered after demo, and specialty lift equipment for steep-gable or multi-story homes – all of which get a fixed line item before work starts.
What Irving Homes Specifically Do to This Job
Irving sits in two very different building markets, split along the SH-114 Airport Freeway corridor, and that split changes the shape of a window project. In the mid-century core – South Irving, the old downtown, the Hospital District and ZIPs like 75062 – we’re working on 1950s – 1970s brick-veneer ranches where the original framing was set on shallow footings over North Texas black-clay soil that swells in wet cycles and shrinks in dry ones. Wall openings move. A geometric window that fit the rough opening on measurement day can arrive to find a corner out of square by spring. On 75060 and 75061 teardown-rebuilds and room additions, we routinely re-engineer the framing with post-tension or pier-and-beam corrections before the window even goes in, and that’s a permitting detail on the front end, not a surprise at trim-out.
On the other side of the corridor – Las Colinas, Valley Ranch, and the 75038/75063 edge by DFW and the Irving Convention Center – the stock is 1980s – 2000s subdivision product plus mid- and high-rise multifamily. Custom geometric windows here are often a design feature: arched transoms over a foyer, trapezoids in a two-story gable, a half-round over a great-room window wall. Wind exposure along the airport side means we spec wind-rated glazing and reinforce the flashing detail, and HOA architectural review is a real gate on shape, color, and exterior trim in those subdivisions. Before you order a custom shape that happens to sit on a HOA-governed street, we pull the plan and confirm the design can pass review.
That’s the throughline: Irving’s two markets mean two different conversations about a custom window – one is about correcting a foundation-era wall before the frame arrives, the other is about designing to a wind rating and a HOA spec. Most of our Irving projects start with a site visit in 75038, 75062, or 75063 that clarifies which conversation we’re having. See Irving for coverage details, and if you’re also tackling the surrounding exterior, homeowners often pair this with Concrete Driveways & Concrete Work in Irving or Asphalt Driveways & Resurfacing in Irving.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Irving
Most full projects run three to five weeks from final measurement to trim-out, with the bulk of that time in factory lead time for shaped units. Single feature windows run three to seven days. Call (844) 797-4808 for a timeline specific to your openings.
Yes, if the work alters the structural opening, resizes a wall, or adds a new window where none existed – that’s a permit-and-inspection job in Irving, and we pull it. A like-for-like replacement in the same rough opening usually doesn’t require a permit. We confirm the requirement on the estimate and never leave it to chance.
No, if nothing new is found behind the wall. If we open the framing and find rot or out-of-square condition we couldn’t see, we bring you a fixed number and a photograph before we proceed – never a surprise change order after the fact. That’s the 730-Day Done Right Promise in practice: the scope and the number stay honest.
Usually yes, if the rough opening is already the right size. A geometric unit can be templated to fit an existing arched or angled opening. If you’re adding a shape where a rectangular window was, some framing and header work is required – and we price that separately before we start.
The workmanship is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer glass and frame warranties pass through to you on the units themselves. We’ll walk through both in writing at the walkthrough so nothing’s buried in fine print.
If you’re in Irving and ready to talk shapes, this is a free on-site estimate, not a sales visit. Call (844) 797-4808 and we’ll ask about your openings, your home’s build era, and whether you’re working with a HOA – then schedule a measurement. Live person, 24/7, no voicemail. For the wider project scope, see our Windows & Doors in Irving page, and for the full service line, our Windows & Doors hub.
Written by the team at Groundwork Construction Co.