Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Dallas, TX
A fence gate in Dallas is the hardest-working part of your fence, and it’s the part that fails first. A basic walk gate with a wood frame runs roughly $250 to $500 installed, while a wide double drive gate with a steel frame and automatic opener climbs to $2,500 or more. Groundwork Construction Co. of Dallas builds gates that swing true, latch clean, and don’t sag after two summers of North Texas heat and clay that swells with every heavy rain.
Most gates aren’t complicated. They’re a frame, a hinge set, a latch, and a decision about how to hold a heavy panel square over time. What separates a good gate from a bad one is how the frame is braced, how the posts are set, and whether the installer thought about the ground underneath. We’ve pulled enough sagging gates out of alley-facing fences in Oak Lawn and Lakewood to know exactly which shortcuts show up six months later.
The work itself is part of our larger Fence Installation service, so if you’re replacing a whole run instead of just the gate, we scope both at once. Call (844) 797-4808 and a live person picks up, day or night, to talk through what you’re picturing.
When You Need Fence Gates
Gates go bad slowly and then all at once. Here are the situations Dallas homeowners call us about most often.
- The gate drags on the ground every time it opens. That’s usually a hinge pulling loose from wet-n-dry lumber or a post that has heaved from Dallas’ expansive clay soil. A gate that drags will eventually tear itself apart at the hinges if you ignore it.
- The latch won’t catch anymore, and the gate swings open in the wind. This gets serious fast on a pool gate or a gate facing an alley. A gate that won’t stay shut is a security gap, and in Dallas’ storm season it’s also a projectile. We’ve seen it during spring storm season when lines of thunderstorms roll through, and the fix is sometimes as small as resetting a post and swapping a self-closing hinge.
- You’re adding a dog and the current gate has a 4-inch gap at the bottom. Texas homeowners with larger dogs often need a taller gate or a tighter reveal. We build gates to your dog’s actual escape tactics.
- You need vehicle access where there wasn’t any. A backyard workshop, an RV pad, a detached garage behind the house, or a driveway gate in a subdivision where the front fence sits at the curb. Double drive gates are a different animal from a walk gate and need a heavier frame and posts sunk deeper.
- You’re planning an automatic gate, or your current opener has died. Solar and low-voltage gate openers need a properly braced steel or aluminum frame and a level track. A wooden gate wrapped around a cheap opener is a recipe for a gate that groans and sticks within a year.
- The neighborhood HOA or the alley behind your house needs a specific gate style. Dallas has fence height limits and setback rules, and some neighborhoods in the Park Cities and Preston Hollow have design review requirements for what faces the street. We handle the layout so you don’t get a notice from the city or the HOA.
If you’re not sure whether the problem is the gate alone or the fence line behind it, we’ll tell you straight. Sometimes it’s just the gate. Sometimes the fence posts along the run have rotted at the base and the gate was the first thing to show it.
Our Fence Gates Process
Here’s how a gate goes from idea to working hardware. It’s the same sequence whether you’re replacing a single walk gate or adding a double drive gate to a new fence run.
- On-site measure and layout. We look at the grade, the existing posts, the swing direction, and how a person or a vehicle will actually use the gate day to day. A gate that’s 30 inches wide is fine for a person and useless for a wheelbarrow. We measure openings and check the ground for the post set.
- Frame and hardware decision. We talk materials and bracing. Wood frames get diagonal bracing so they hold square; steel or aluminum frames are the right call for anything wider than about 5 feet. We source quality hardware because the hinges and latch are what fail. For gates in the fence line, we also match the infill to the rest of the run so nothing looks bolted on. If you’re pairing a gate with new glazing or a porch enclosure, our brands like CGI and ECO Window Systems come into the conversation, but the gate itself is fence work first.
- Demolition and post set. We remove the old gate and check the posts. If a post is compromised, it gets replaced and set in concrete. A gate is only as stable as the post holding it, and clay soil here punishes shallow sets. We dig to depth and set the post so it has a fighting chance through the freeze-thaw and wet-dry cycling Dallas throws at it.
- Build, hang, and adjust. The gate gets built to size, hung on the appropriate hinges, and checked for swing. We adjust the reveal, the clearance under the gate, and how tight the latch catches. This is where most bad gate jobs go wrong; it takes a few minutes of tweaking to get a gate right and a shortcut of twenty minutes to leave it wrong.
- Walkthrough with you. We open it, close it, latch it, and show you how to adjust the hinges and latch over time. If there’s an automatic opener, we test it and walk through the remote and the safety reverse. You get the gate working and know how to keep it working.
- Backed by the 730-Day Done Right Promise. If a hinge loosens, a latch fails, or the gate sags within two years, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s on every gate we hang.
Fence Gates Pricing in Dallas
Pricing on a gate depends on width, materials, and hardware, not just the number of hours. Here’s a realistic range for the Dallas market. These are estimates, and your written quote is what we stand behind, no-hassle upfront pricing, the number you see is the number you pay.
| Gate type | Typical installed range | What drives the price |
|---|---|---|
| Walk gate, wood frame, 36-48 inches | $250 – $500 | Hardware quality, post viability, infill match |
| Walk gate, steel or aluminum frame | $450 – $900 | Frame weight, finish, hinges and latch |
| Double drive gate, wood frame | $900 – $1,800 | Width, bracing, number of hinges, set posts |
| Double drive gate, steel frame | $1,500 – $2,800 | Frame, wheel size, latch hardware |
| Pool gate with self-closing hardware | $300 – $650 | Safety-grade hinges and latch |
| Automatic gate opener (installed, frame-ready) | $1,200 – $2,500 | Arm vs. slide, opener brand, solar vs. line power |
What moves the number up or down
- Post replacement. If the gate posts are sound, you’re paying for the gate. If they’ve rotted at the base, add $150 to $350 per post, including concrete and removal.
- Wider = heavier. A 12-foot double gate needs heavier hardware and more bracing than most people expect. We don’t shortcut this one.
- Automatic openers. These are a separate install from the gate build and need to be matched to the frame. We’ll scope them together.
- Matching the existing fence. If we’re matching your eight-year-old cedar, there’s a small premium for the infill. Often it’s worth it for a clean look from the street.
Every gate quote comes with a free project estimate and design consult. Ask about the $1,000 off projects over $10,000 if the gate is part of a bigger fence or outdoor project. And 0% financing for 18 months is available on larger scopes. Call (844) 797-4808 and we’ll talk through the range before anyone comes out.
Why the Right Hinge and Post Matter in Dallas
Dallas weather is hard on gate hardware. Summer heat expands wood and steel, then a fall cool-down contracts it, and the gate that opened smoothly in June is catching an inch off in November. Add the wet and dry cycles on our clay soil and you get posts that shift slightly, which is all it takes to throw a gate out of square. This is why we overbuild the frame bracing on wider gates and why we refuse to hang a heavy drive gate on a single post without checking what’s under it.
We’ve also seen plenty of gates that weren’t hung for the Dallas code and HOA landscape. Fences in Dallas have height limits, some lots require specific setbacks, and pools have their own barrier requirements. We handle those layout questions as part of the process, so the gate you get is one the city and your HOA will leave alone.
Groundwork Construction Co. of Dallas has been in business since 2014, and our technicians bring up to 12 years of experience to the job. We’re background-checked, we show up in uniform, and we’re a single point of contact from layout through final adjust, from foundation to finish line. If you’re comparing us to a one-truck fence crew, that’s the difference. Our hardware and openings are built to last, backed in writing.
Walk Gates vs. Drive Gates: What Dallas Homeowners Usually Actually Need
Most people call about a gate without knowing they need a specific type. A walk gate is for people, and 36 to 48 inches is the comfortable range for a backyard or side-yard entry. A double drive gate is for vehicles, and it needs an opening matched to your widest wheelbase (a standard pickup at 6.5 feet to the mirrors, a small trailer more than that). If you’re planning an automatic gate, the swing or slide decision changes the frame design. We walk through this on site because the difference between a gate that works for a decade and one that fights you every morning is often just which type you chose.
We also handle replacing just that one gate on an existing fence line, even when the rest of the run stays put. Matching the infill to the rest requires a little care, but it’s a standard job and often less expensive than people expect. If you’re replacing the whole run, our Fence Installation in Dallas page covers the wider scope, and we’ll quote the gate as part of it.
FAQs – Fence Gates
How much does a fence gate cost in Dallas?
A basic wood walk gate installed in Dallas runs about $250 to $500, and a double drive gate typically ranges from $900 to $2,800 depending on frame material and width; a single walk gate with steel frame sits in the $450 to $900 band. The main variables are post condition, hardware quality, and width. Call (844) 797-4808 for a free estimate with exact pricing for your gate; the number you see is the number you pay.
Can Groundwork come out the same day?
Often yes, for a gate repair or replacement within our service area. If a gate is hanging off its hinges or a latch has failed, call (844) 797-4808 and a live person will pick up 24/7 to get you on the schedule. Full gate replacements usually need a site measure first, which we can often do same day or next.
Should I repair or replace a sagging gate?
Repair usually wins if the posts are sound and only the hinges or latch have loosened. Replace if the gate frame itself is out of square, the posts have rotted at the base, or the gate is more than a few years old and the hinges keep pulling. We’ll tell you which one is the better call before we quote, no-hassle upfront pricing means we don’t pad the repair to push a replacement.
Can you install an automatic gate opener?
Yes. Automatic openers for gates in Dallas run about $1,200 to $2,500 installed and need to be matched to the gate frame. We install openers as part of the gate build, not as an afterthought, so the gate and the opener work together from day one. Call (844) 797-4808 to talk through options.
Recent Gate Work Across Dallas
In East Dallas, we’ve reset gate posts on several older properties where the original fence line was installed decades ago and the posts have slowly worked loose in the soil. A gate that was hanging fine last spring starts dragging and the owner assumes the gate is shot, when really the post has shifted. Pulling the post, re-setting it in concrete, and re-hanging the gate is faster and cheaper than a new gate and gives you another decade of life. On the north side of town, we see more double drive gates added to backyard workshops and garage access, and the conversation usually turns to frame bracing and how much infill will block the swing. Either way, we get the layout right before we build, so the gate is built for the yard it lives in.
Talk to Us About Your Gate
Whether you have a gate that won’t latch or you’re planning a new drive gate for a backyard workshop, the fastest answer is a call. Reach us at (844) 797-4808 for a free estimate. Calls are answered by a live person 24/7, we offer free project estimates and design consults, and projects over $10,000 qualify for $1,000 off. Start to finish, from foundation to finish line.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas.