Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Grand Prairie, TX: What It Costs and How Fast It Gets Fixed
Fence repair in Grand Prairie usually runs $350 to $1,800 for section-level fixes, and most of those jobs are finished in a single day. A full run replacement, where posts, rails and pickets all go, lands in the $3,500 – $9,000 range from the price table we use across this area. Call (844) 797-4808 and you’ll get a live person who can put a real number on your fence, not a callback promise.
Why Blackland Prairie Clay Wrecks More Fences Here Than Anywhere Nearby
Walk the older blocks off Main Street in 75050 and you’ll see it before anyone says a word: fence posts leaning at slightly different angles, like they’re all listening to different conversations. That’s the clay. Grand Prairie sits on the Blackland Prairie’s expansive soils, and those soils swell and shrink with every drought-to-deluge swing. A post set into that ground isn’t failing because the wood rotted. It’s failing because the ground moved under it.
What that looks like on a real job: a six-year-old cedar privacy run where three posts have heaved and the gate drags. Or a fence that’s perfectly plumb at one end of the yard and four inches off at the other, because one stretch of the yard drains and the other holds water. This is the fence repair Grand Prairie homeowners call us about most, and it’s a different problem than the rot-and-rust calls we get in newer subdivisions off 75052.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How a Fence Repair Actually Runs, Stage by Stage
Stage 1: The on-site look, roughly 30 minutes. We walk the line, pull on posts, check for rot at the soil line and open the gate a dozen times to watch where it binds. You decide right there whether you want the repair scoped section by section or priced as a full run, and you get both numbers in writing. No pressure to pick one.
Stage 2: Setting the scope, day 1. We mark which posts get reset in concrete, which get pulled and replaced, and which pickets come out. If the fence sits close to a property line, you confirm the setback you’re working with, and if you’re in an HOA subdivision, you pull out the architectural approval you already have on file. That takes a day for you to round up, so it’s worth starting early.
Stage 3: Tear-out and ground prep, day 1 into day 2. Old concrete footings get broken out and hauled off. That’s the part homeowners underestimate. In Grand Prairie clay, a footing that’s been in the ground fifteen years can be a genuine fight to remove, and a stubborn one adds half a day. We set new posts in concrete and give them the cure time they need before anything gets hung on them.
Stage 4: Rebuild day, day 2 or 3. Rails, pickets, cap and trim go up, and any hardware swap gets done, including hinges and latches on gates. Most of this is one crew, one visit.
Stage 5: The walk-through. You open and close every gate yourself. We adjust until it swings clean. Any board that’s cupped or twisted from the yard gets swapped before you sign off.
The Options You’ll Choose Between on a Fence Repair
Repair work is mostly about matching what’s already there, and matching is where the honest trade-offs live.
- Patch the same material: the cheapest route by a wide margin. Cedar pickets fade toward gray over a few seasons and new ones come in orange, so expect a visible patch for the first year. It’s the right call when the fence is otherwise sound.
- Step up to a composite or PVC board: costs more per picket, holds color, and won’t rot at the soil line the way wood does. Best for a fence you intend to keep another decade, not for a run you’re replacing next spring.
- Reset posts in deeper footings: worth the extra money in this soil. A shallow footing is exactly what failed the first time. Going deeper and wider is the difference between a repair that lasts and a repair you repeat.
- Steel posts inside a wood fence: the posts don’t heave with the clay the same way, and they don’t rot. More upfront, less maintenance after. Homeowners on the older slabs in 75051 tend to ask about this once the second round of post resets comes due.
- Gate hardware and framing: a sagging gate usually needs a new frame and a heavier hinge set, not a new gate. Swapping hardware alone on a tired frame buys you a few months.
If the repair turns out to be a small piece of a bigger yard project, that’s a different conversation, and it’s the one our Fence Installation in Grand Prairie page covers.
See the difference
Before
After
Before
After
Before
AfterWhat Fence Repair Costs in Grand Prairie, TX
For this market: section-level repairs land at $350 – $1,800, post resets typically $150 – $400 each, gate rebuilds $250 – $700, and a full fence replacement in vinyl or aluminum runs $3,500 – $9,000. Those are the ranges we quote from, and they hold.
Four things push a job toward the top or bottom of that band:
- Post count and footing condition. One post is a repair. Six posts in clay that’s swallowed old concrete is a half-day of demolition before anything goes back up.
- Material matched. Cedar patch boards are cheap. Composite or PVC pickets cost two to three times more per board, and a full run of either moves you toward the replacement range.
- Access. A fence line hemmed in by a shed, a pool or a mature pecan tree means hand-carrying everything. That adds labor hours, not materials.
- Permit and HOA scope. A straight repair usually needs neither. A run over a certain length, or a fence being replaced along a corner lot, can trigger a city review.
Your written estimate itemizes posts, boards, hardware and labor separately, with the total at the bottom. The number you see is the number you pay, and it’s covered by the 730-Day Done Right Promise: if it isn’t right, we make it right. One thing our quotes don’t include is landscaping repair around a footing, so if a shrub has to come out, you’ll know before we start, not after.
What Grand Prairie Homes Specifically Do to This Job
Grand Prairie straddles Dallas and Tarrant counties, and that line matters more than people expect. A fence permit question here can land in two different county systems depending on which side of town you’re on, and the answer isn’t always the same. Add clay soil that has already shifted half the foundations in the older parts of 75050 and 75051, and you get fences that are fighting the same ground movement as the house. On blocks near the old downtown core, we regularly see original slab-on-grade homes that have been leveled once, and their fences have followed the same wobble.
Newer tract subdivisions in 75052 are a different story. Fences there are younger, so the calls are usually storm damage after a spring hail or high-wind event, or a gate that finally gave out. If you’re planning to build on the lot and want the fence figured into it, that often pairs with Garage Conversion ADU in Grand Prairie work, or with ADU Design & Permitting in Grand Prairie if a new structure means reworking the yard line. Whatever the reason, we cover Grand Prairie end to end across 75052, 75051, 75053 and 75050. For new builds, our Fence Installation service is where that starts.
Serving Grand Prairie, TX – Our Local Coverage Area
We serve Grand Prairie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Fence Repair in Grand Prairie
Most repairs finish in a single day, and post resets that need concrete to cure can stretch to two or three. A full run replacement typically takes two to four days once materials are on site. Call (844) 797-4808 and we’ll give you a real timeline for your fence.
Straight repair work on an existing fence generally doesn’t need a permit, but replacing a full run or building along a corner lot can trigger a review, and the county you’re in affects the answer. We’ll tell you which side of that line your job falls on before any work starts.
Repairs run $350 – $1,800 for section-level work, with post resets typically $150 – $400 each and gate rebuilds $250 – $700. Full replacement sits at $3,500 – $9,000. Call (844) 797-4808 for an exact quote, and the estimate is free.
No. We quote from an on-site look, itemize the estimate, and hold the number. If we open a footing and find something genuinely unexpected, you hear about it before we spend a dollar on it.
Every repair carries the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something we fixed fails inside that window, we come back and make it right.
Get a Free Fence Repair Estimate in Grand Prairie
Call (844) 797-4808 and a live person picks up, day or night. Tell us what your fence is doing and we’ll set a time to walk it with you. You get a written, itemized estimate for the repair in Grand Prairie, a clear answer on permits, and a crew that shows up background-checked and in uniform. No guesswork, no surprise line items.
Written by the team at Groundwork Construction Co.