A Groundwork company - serving Dallas, TX
Metal Roofing in Farmers Branch, TX | Groundwork Construction Co. of Dallas

Metal Roofing in Farmers Branch - Free Roof Inspection, Written Price

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in Farmers Branch, TX: What the Job Actually Involves

Metal roofing in Farmers Branch usually runs $15,000 to $40,000 for a full residential install, and most homes are weather-tight in five to nine working days. The job means stripping the old shingles, checking and repairing the deck, laying down underlayment and a wind-rated panel system, then flashing and trimming it out. Older 1950s to 1970s ranch stock here sometimes hides rotten sheathing under worn shingles, which is the one thing that can stretch the schedule. Call (844) 797-4808 for a free on-site estimate.

Call (844) 797-4808

How We Run a Metal Roofing Job, Start to Finish

No two roofs go the same way, but the sequence below is what a Farmers Branch metal roofing project looks like from the first morning to the final inspection.

  • Day 1 – tear-off and deck inspection. We strip the existing roof down to the sheathing and walk every sheet. Any soft or delaminated decking gets replaced before a single panel goes down. You’ll know the deck condition and the exact replacement count by end of day. Most homes don’t need more than a few sheets.
  • Day 2 – underlayment and edge metal. We roll out a high-temp synthetic underlayment rated for metal’s heat cycle, then set drip edge and rake trim. This is also when we map out panel layout and confirm where the valleys and penetrations land. This is your last easy chance to change panel color if you’ve been going back and forth.
  • Days 3 to 6 – panel installation. Panels go up in order, screwed through the ribs at the fastener spacing the wind rating calls for. Standing seam panels run longer and slower than exposed-fastener panels, so a simple gable roof may finish panels in two days while a cut-up hip roof with dormers can take four.
  • Day 6 or 7 – flashing and penetrations. Vents, chimney surrounds, skylights and wall transitions get their own formed flashing. Every penetration is a leak waiting to happen, so we don’t rush this stage.
  • Final day – cleanup and inspection. Magnetic sweep of the yard, gutter clearing, a final walkthrough with you on the ground while we’re still on the roof. Then we call for inspection if the scope requires it.

As part of a full Roofing in Farmers Branch scope, we sequence metal over the top of any attic insulation or structural work so the trades aren’t stepping on each other. If you want to see the wider set of roof work we handle, our Roofing service covers it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Metal Roofing Choices That Actually Matter to You

The material decision drives most of the cost and all of the feel of the finished roof. Here’s what’s on the table, with the honest trade-off of each.

  • Standing seam steel – the premium option. Hidden fasteners, clean lines, typically 40 to 70 years of life. It’s the strongest wind performer because there are no exposed screws to work loose. Costs more per square and takes longer to install.
  • Exposed-fastener steel panels – lower cost, faster install, good for outbuildings, shops and budget-conscious homes. The trade-off is visible screws with rubber washers that can dry out over 15 to 25 years and need inspecting. Fine for a shed; less ideal on the house you plan to keep.
  • Aluminum panels – lighter, rust-proof, and a strong choice near coastal-influenced humidity, though on a North Texas roof the weight savings matter less. Higher material cost than steel.
  • Stone-coated steel – looks like tile or shake but installs as panels. Popular on homes that want the metal performance without the modern industrial look. Heavier and a middle price point.
  • Paint finish and color – a Kynar-type finish holds color far longer than a basic acrylic. Light colors reflect more heat, which matters on a Texas roof that bakes from May to September.

What Metal Roofing Costs in Farmers Branch, TX

Expect $15,000 to $40,000 for a full metal roof on a typical Farmers Branch home, or roughly $9 to $16 per square foot installed. That’s the real working number and it’s what you’ll see on a written estimate, not a teaser.

Five things push a job toward the low or high end of that range:

  1. Roof size and pitch. A simple gable is cheaper per square than a steep hip roof with valleys and dormers, because every cut slows the crew.
  2. Deck condition. A 1960s roof with soft sheathing means new plywood, and that’s usually a few hundred to a couple thousand dollars depending on how much turns up.
  3. Panel type and gauge. Standing seam aluminum sits at the top; exposed-fastener steel at the bottom.
  4. Number of penetrations and valleys. Every vent stack and chimney adds formed flashing and labor.
  5. Permit and inspection scope. Farmers Branch enforces permits on roof work, and a full re-roof with deck replacement is a larger inspection package than a straightforward overlay.

A written estimate from us lists tear-off, underlayment, panel material, flashing, cleanup and permit line by line, with the number fixed and no change orders unless you ask for a change. What it doesn’t include: structural repairs discovered mid-job (we price those separately and you approve them before we proceed), tree trimming for access, or gutter replacement if the existing gutters can’t take the new roof edge. Background-checked, uniformed technicians handle the install, and everything’s backed by our 730-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Farmers Branch Homes Specifically Do to This Job

Farmers Branch is a built-out inner-ring suburb (ZIP 75234), so most of the roofs we metal here go onto existing stock, not new construction. That matters because the housing near the Dallas line is largely mid-century ranch and small post-war cottages from the 1950s to the 1970s, and those roofs have been re-covered two or three times over the decades. Layered shingles mean a full tear-off before any metal goes down, and a full tear-off is where the surprises live: old skip sheathing, occasional rot at the eaves, and fasteners that never matched the original structure.

The clay soil underneath doesn’t shake a roof directly, but it does mean additions and rebuilds here get engineered for movement, and the roof has to meet framing that’s been tied into that engineering. On the weather side, this is hail and straight-line wind country. Metal holds up far better than shingle in a serious spring storm, but only if the panel wind rating, the fastener pattern and the edge and valley flashing are all specified for high wind. We spec the system that way by default. On homes near the Valley View and I-35E corridor, tighter lots also mean we plan material staging carefully, since there’s no side yard to speak of. Homeowners here who are also replacing glazing often pair this with Window Replacement in Farmers Branch so the whole envelope gets brought up to wind-ready spec at the same time, and we cover the full Farmers Branch area.

Serving Farmers Branch, TX – Our Local Coverage Area

We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Metal Roofing in Farmers Branch

Schedule Your Free Metal Roofing Estimate

A free on-site estimate for metal roofing in Farmers Branch starts with a phone call to (844) 797-4808. A live person answers, any hour. We’ll set a time to walk the roof with you, measure the squares, check the deck, and hand you a written line-item quote with a fixed price and the permit scope spelled out. No pressure, no vague bids, no surprise line items later.

Written by the team at Groundwork Construction Co.

Why Farmers Branch Chooses Groundwork Construction Co. of Dallas

We set the standard for metal roofing in Farmers Branch.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Farmers Branch

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Farmers Branch Customers Say

Trusted by homeowners across Farmers Branch and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Metal Roofing in Farmers Branch?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Farmers Branch.

(844) 797-4808

Request a Free Estimate in Farmers Branch

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch