Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in Highland Park, TX: What the Job Actually Involves
Tile roofing in Highland Park, TX typically runs $600 to $2,500 for a targeted tile roof repair and $8,000 to $20,000 for a full roof replacement, with most jobs finished in one to three days once materials and a permit are in hand. The work means lifting damaged clay or concrete tiles, replacing the underlayment and flashing beneath them, and resetting the tiles so the roof drains the way it was designed to. Call (844) 797-4808 for a free on-site estimate.
How a Tile Roofing Job Moves From First Inspection to Final Walkthrough
Tiled roofs hide their problems under the tile. The tile itself usually outlasts the waterproofing layer below it, so what we find on day one decides the shape of the whole project. Here is the sequence we follow on a Highland Park tile roof.
Stage 1 – Inspection and moisture mapping (about 2 hours). We walk the roof, check the valleys and penetrations, and probe the underlayment at the low points where water pools. We photograph everything. You get a written report that separates failed tile from failed underlayment, because the fix is different for each.
Stage 2 – Scope and tile-matching decision (day 2). This is your biggest decision. On a century-old Mediterranean or Tudor home, a replacement tile has to match an original profile that may be discontinued. We pull samples and confirm whether the existing stock can be salvaged, matched from a reclaimed lot, or replaced across a whole slope so the color reads consistently. You approve the approach in writing before anything comes off the roof.
Stage 3 – Permit and material staging (3 to 10 business days). Tile is heavy, and it arrives on a pallet that has to land somewhere. On narrow, tree-canopied Highland Park streets that means planning the delivery around the canopy and street access. The town permit runs alongside material ordering.
Stage 4 – Tear-off and underlayment (1 to 2 days). We remove the tile in the work zone, inspect the deck for rot, and replace any soft sheathing. Then new underlayment and flashing go down. The flashing at chimneys, valleys, and wall intersections is where most leaks start, so that gets the most attention.
Stage 5 – Tile reset and final inspection (1 to 2 days). Tiles go back down or new ones go on, broken pieces get swapped, and we walk the roof with you and your report in hand. A full replacement on a large or complex roof can stretch the whole sequence to about a week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Tile Options You’ll Choose Between
Tiled roofing is not one product. The choice affects cost, weight, lifespan, and how well the roof handles North Texas hail.
- Clay tile: The classic Mediterranean look and the longest-lived option, often decades of service. It’s the priciest per square and it chips on hard impact, so hail is its weak spot. Best for a homeowner restoring an original look.
- Concrete tile: The workhorse. Lower cost than clay, comes in many profiles and colors, and holds up well to heat. Heavier than asphalt, so the deck has to be sound. A strong middle choice.
- Tile profile: Barrel, flat, and low-profile shakes each change the roofline and the labor. Barrel tile takes more time to set and align, which pushes labor up. Flat profiles install faster but look plainer on a Tudor or Colonial.
- Underlayment grade: The layer under the tile is what actually keeps water out. A heavier, higher-rated membrane costs more upfront and lasts longer, which matters on a roof you plan to keep for decades.
- Reclaimed versus new tile: Reclaimed tile matches an original roof but supply is unpredictable. New tile is reliable and warrantied but may read slightly different in color on a sun-aged roof.
What Tile Roofing Costs in Highland Park, TX
Tile roof repair in Highland Park runs $600 to $2,500. A full tile roof replacement runs $8,000 to $20,000. Those are the honest ranges; here is what pushes you toward one end or the other.
- Roof size and pitch: A steep or complex roof with many valleys and penetrations takes more labor and more underlayment.
- Existing condition: Soft decking, rotted fascia, or failed flashing adds repair work before the tile goes back down.
- Tile choice: Clay and barrel profiles cost more in material and labor than flat concrete.
- Tile matching: Sourcing discontinued or reclaimed tile for a partial replacement adds cost and time.
- Permit scope: A full replacement needs a different permit and inspection path than a spot repair, and the Town of Highland Park’s review adds lead time.
A written estimate from us lists line items: tear-off, deck repair, underlayment, tile, flashing, and permit. It does not silently include structural framing repair if we find rot, and it does not include interior ceiling repair from a past leak. We flag those the moment we see them so there are no change-order surprises. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Specifically Do to a Tile Roofing Job
Highland Park is almost fully built out, and that shapes every tile job here. The housing stock leans on 1910s to 1930s Tudor, Colonial, and Mediterranean homes, and many of them have been expanded or rebuilt lot-line to lot-line over the years. That means the roof you’re looking at is often a patchwork of original tile, later additions, and repairs done by previous owners, so matching and flashing get complicated fast.
Permitting runs through the Town of Highland Park’s own design review and lot-coverage rules rather than Dallas codes, and the approval path is tighter than most contractors expect. The mature pecan and live oak canopy over the narrow streets also matters: material deliveries and any lift work have to be planned around tree protection. Add North Texas heat, expansive clay soils that keep foundations moving, and spring hail and windstorms, and you get the two failure modes we see most: cracked tile after a hail event, and flashing pulled loose by foundation and thermal movement. That is why we inspect the whole assembly, not just the tile on top. If the wider envelope needs attention, it’s often part of a full Roofing in Highland Park scope, and homeowners frequently pair the work with Impact Windows & Doors in Highland Park to harden the house against the same storms.
We cover the whole of Highland Park and the surrounding blocks, and our roofing service handles the broader envelope when a tile job turns into more. Some homeowners also add Energy-Efficient Windows in Highland Park in the same season to cut heat gain under the new roof.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Tile Roofing in Highland Park
A targeted tile repair is usually done in one day. A full tile roof replacement on a typical Highland Park home takes about three to seven days once the permit and materials are ready, because the town review and tile delivery add lead time before work starts. Call (844) 797-4808 to schedule a free estimate and get a timeline for your roof.
Yes, most tile roof work here needs a permit through the Town of Highland Park, which runs its own review rather than following Dallas codes. We handle the permit and inspections as part of the job. Call (844) 797-4808 and we’ll walk you through what your project needs.
Often yes. If the deck and structure are sound, we can lift tiles in the failed zone, replace the underlayment and flashing, and reset the tile. If the underlayment has failed across a whole slope, a full tear-off is the honest answer. We confirm which one you need during inspection. Call (844) 797-4808 for an exact assessment.
Tile roof repair in Highland Park runs $600 to $2,500 depending on the size of the failed area, tile matching, and whether flashing or decking needs work. Call (844) 797-4808 for an exact quote; estimates are free.
Our workmanship is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our labor on the tile and underlayment, separate from any manufacturer warranty on the tile itself. Call (844) 797-4808 to go over the details for your roof.
Get a Free Tile Roofing Estimate in Highland Park
If your tile roof is cracked, leaking, or due for a look, start with a free on-site estimate. Call (844) 797-4808 and a live person answers, day or night. We’ll inspect the roof, photograph what we find, and hand you a written line-item estimate with the tile options and a clear timeline. No pressure, no surprises.
Written by the team at Groundwork Construction Co.