Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Cedar Hill, TX: What the Job Really Involves
Vanities, tile and fixtures work in Cedar Hill typically runs $9,000 to $28,000 and takes two to four weeks of on-site work, depending on how much tile gets replaced and whether the plumbing moves. The scope covers your new vanity and countertop, floor and wall tile, shower or tub surrounds, plus the fixtures themselves: faucets, drains, showerheads, valves and trim. Call (844) 797-4808 and we’ll walk your room room by room, then put the whole thing in writing before any tile comes out of the box.
How Our Vanities, Tile & Fixtures Process Runs, Stage by Stage
Every job follows the same sequence, and you’ll know what’s happening on each day. Here’s the honest version, not a brochure.
Stage 1: In-home measurement and selections (one visit, 60 to 90 minutes). We measure the room, check what’s behind the walls where we can, and photograph the existing plumbing and electrical. You’ll decide two things right away: vanity width and the general tile direction. Everything else can wait for the estimate.
Stage 2: Written estimate and material lock-in (two to four days). You get a line-item quote with tile allowances, fixture models and labor broken out. This is where you pick the actual products: vanity style and countertop material, tile format, faucet finish. We finalize selections now so nothing stalls mid-job.
Stage 3: Demo and rough-in (two to three days). Out comes the old tile, vanity and fixtures. If we’re relocating the sink, a supply line or an outlet, that happens here and gets inspected before anything closes up. If your selections don’t require moving plumbing or electrical, we skip inspection entirely and save a week.
Stage 4: Tile and vanity installation (four to ten days). Wallboard and waterproofing go up first, then floor tile, then wall or shower tile. Vanity sets next, then the countertop template or slab install if you chose quartz or stone. Grout and caulk are the last two days, and they’re the days that decide whether the job looks clean in five years.
Stage 5: Fixtures, trim and final walkthrough (one to two days). Faucets, drains, shower trim, towel bars and mirrors go on. We test every drain and supply, then walk the room with you. Any punch-list item gets fixed before we call the job done, and the whole thing sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make, and What Each One Actually Costs You
Most of your budget swings on four decisions. Here’s the trade-off on each, without the sales spin.
- Vanity construction: stock, semi-custom or custom. Stock cabinets in the $800 to $1,500 range fit standard openings and install in a day. Semi-custom gives you the width and drawer layout you want, usually $1,500 to $2,500. Custom millwork fits an odd wall or a double-sink layout and lands at the top of the $800 to $3,000 vanity band. If your wall is out of square by more than an inch, custom often costs less than the filler panels a stock unit needs.
- Countertop: quartz, granite or solid surface. Quartz holds up to Cedar Hill’s hard water spotting better than granite and needs no sealing. Solid surface is the budget pick and can be sanded out if it scratches. Stone slabs cost more and add a week for templating, so plan around it.
- Tile: porcelain, ceramic, natural stone or luxury vinyl. Porcelain is the workhorse – dense, water-resistant and available in large formats that mean fewer grout lines. Ceramic costs less but chips more easily on floors. Natural stone, like travertine or marble, looks great and demands sealing every year or two. Luxury vinyl plank or tile goes down fast and handles moisture well, but it won’t hold resale value the way real tile does in this market.
- Fixtures: finish and valve quality. A builder-grade faucet and a name-brand one cost about the same up front and differ by years of service. Kohler and similar lines carry replacement cartridges you can actually find in ten years, which is not true of every import. Ask about the valve behind the wall, not just the trim you see.
What Vanities, Tile & Fixtures Costs in Cedar Hill, TX
A full vanities, tile and fixtures package in Cedar Hill runs $9,000 to $28,000. A focused refresh – new vanity, floor tile, faucet and shower trim without moving anything – sits near the bottom. A room where we relocate the sink, re-tile the shower walls floor to ceiling and set a stone countertop lands near the top. Our wider Bathroom Remodeling in Cedar Hill scope covers the full project when you’re also changing the layout or the tub.
Five things move the number:
- Square footage of tile. Floor and wall tile are priced per square foot, so a large room with shower walls adds real cost. A typical 40-square-foot floor is a small part of the budget; 120 square feet of wall tile is not.
- Existing condition. Water damage behind old tile, a rotten subfloor or a failing valve adds demo and repair days you can’t see from the doorway.
- Moving plumbing, electrical or structure. Relocating a drain or adding a circuit means permits and inspection. That step alone adds a week and real dollars.
- Material grade. A porcelain floor at $3 to $6 a square foot and a natural stone at $10 to $20 are the same labor, very different material cost.
- Vanity size and countertop. A single 36-inch vanity with a solid-surface top and a double 60-inch vanity with quartz are not close.
Our written estimate lists tile allowance, fixture models, labor and permit fees as separate lines, so what you approve is what you pay. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Cedar Hill Homes Specifically Do to This Vanities, Tile & Fixtures Job
Cedar Hill’s terrain shapes this work more than most homeowners expect. The city’s hilly, tree-covered lots mean many homes sit on a slab that has moved with the expansive clay, and clay soils shift seasonally here. That matters for a tile job because a slab crack telegraphs straight up through floor tile. We check for cracks, hollow spots and past patching during the measurement visit, and we plan for a crack-isolation membrane over any slab that’s shown movement. Skipping it is how a $9,000 tile floor cracks in two winters.
The housing stock tells the rest of the story. Most of the homes we work on date from the 1980s to the 2000s in the subdivisions off Belt Line and Wintergreen, plus older ranch homes in the original townsite. In the 1980s and 1990s builds, we regularly find original builder-grade valves and supply lines that are one nudge from failing, so we replace them while the wall is open rather than gamble on them. West-side lots near Joe Pool Lake are a different situation – builders hit limestone within a few feet, so any plumbing relocation there means rock work and a longer schedule. If your home also needs exterior work, homeowners often pair this with Tile Roofing in Cedar Hill or Specialty Roofing in Cedar Hill while crews are already on site.
On permits: cosmetic tile, vanity swaps and fixture replacement generally don’t require a permit, but relocating a drain, moving a wall or adding a circuit does, and Cedar Hill inspects that work before it’s covered. We pull what’s required and see the inspection through. If you’re in an HOA subdivision, check your architectural rules before you plan an exterior vent or a window change in the same room, because approval timelines vary.
Serving Cedar Hill, TX – Our Local Coverage Area
We serve Cedar Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Cedar Hill
Plan on two to four weeks of active work on site. A cosmetic refresh without plumbing changes takes the shorter end; a room with relocated plumbing, a stone countertop and full wall tile takes the longer end, and the countertop template alone adds about a week. Call (844) 797-4808 for a timeline built around your room.
Not for surface tile, a vanity swap or fixture replacement. You do need one when plumbing or electrical gets relocated or added, and that work gets inspected before the walls close. We handle the permit and inspection as part of the job.
Yes, and most of our Cedar Hill jobs do exactly that. If the new vanity fits the existing drain and supply locations, there’s no plumbing change, no inspection delay and a shorter schedule. We check measurements first so you know which case you’re in before you commit.
The range is $9,000 to $28,000, with most jobs landing between $12,000 and $20,000. Tile square footage, material grade, existing water damage and any plumbing relocation are the levers. Call (844) 797-4808 for an exact quote – estimates are free.
Our workmanship sits under the 730-Day Done Right Promise – if it isn’t done right, we make it right. Product warranties come from the manufacturers, and we hand you the paperwork for every fixture and finish. Waterproofing and tile installation are covered for the full term.
Get a Free On-Site Estimate for Vanities, Tile & Fixtures in Cedar Hill
Call (844) 797-4808 to schedule your free on-site estimate. A live person answers around the clock, and we’ll set a visit that fits your week. On the call we’ll confirm your room size, ask what’s changing and what’s staying, and book the measurement visit. From there you get a written, line-item quote with no surprise change orders. We cover Cedar Hill and the surrounding area, and our Bathroom Remodeling team handles the wider scope when your project grows.
Written by the team at Groundwork Construction Co.