Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Duncanville: What the Job Involves and What It Costs
Replacing vanities, tile, and fixtures in a Duncanville bathroom typically runs $9,000 to $28,000 for a full gut, and $900 to $3,000 of that is usually the vanity alone. Most of these jobs take 2 to 4 weeks on a 1950s – 70s Duncanville ranch, because the real work is behind the tile: patching a slab, tying a new shower pan into the drain, and pulling a permit before anyone sets a fixture. Call (844) 797-4808 and we’ll give you a line-item number, not a ballpark.
How We Run a Vanities, Tile & Fixtures Job, Start to Finish
Most contractors quote this work from a photo. We don’t, because in Duncanville the surprises are all in the walls and under the slab. Here’s the sequence we actually follow.
Days 1 – 2: demolition and discovery. We pull the old vanity, tear out the tile and backer board, and expose the drain, supply lines, and the slab or pier-and-beam framing. On Duncanville homes built before about 1975, this is where we find the cast-iron drain connections and the occasional out-of-level floor. You decide at this stage whether we’re keeping the fixture layout or moving anything; every relocation gets priced in writing before we go further.
Day 3: rough-in and inspection. If we’re moving a drain for a new vanity position or a shower valve, the plumber sets new PEX or PVC and an electrician drops GFCI receptacles and a new vent fan if you want one. The city inspector signs off on rough plumbing and electrical before any tile or board goes up. You don’t need to be there, but you’ll get a photo of the inspection card.
Days 4 – 6: substrate and waterproofing. Cement board and a bonded waterproof membrane go in. This is the stage nobody sees and everybody regrets skipping. Our technicians have up to 12 years on these, and the rule is simple: no membrane, no tile.
Days 7 – 12: tile and vanity setting. Floor tile, wall tile, and grout, then the vanity gets set level and shimmed to the floor, the top goes on, and the sink and faucet get mocked up. You approve the layout dry-fit before anything is permanently set. This is your last easy moment to change a tile pattern or a backsplash height.
Days 13 – 15: fixtures, trim, and walkthrough. Toilet reset, faucets, mirrors, towel bars, caulk, and a full leak and flow test. We walk the room with you, note anything on a punch list, and close it out. Most of these jobs finish in a single continuous visit window rather than a stop-start schedule that drags into the next month.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
This job is really four decisions. Here’s the honest trade-off on each.
- Vanity type and size. A stock 30- or 36-inch vanity runs $900 – $1,800 installed and fits most Duncanville hall baths. A semi-custom vanity in the $1,800 – $3,000 range gets you a real furniture-grade cabinet and the exact depth and width you want. Solid wood or plywood boxes outlast particleboard in a bathroom that sees daily steam.
- Countertop material. Cultured marble is the budget pick and holds up fine, quartz is the durable middle and reads as stone, and natural stone needs sealing in a wet room. Quartz from a partner like Cambria is the one most of our Duncanville clients land on for a rental-grade to forever-home balance.
- Floor and wall tile. Porcelain is the workhorse here, low absorption and cheaper per square foot than natural stone. Ceramic is softer and cheaper but chips. Large-format tile (12×24 or bigger) means fewer grout lines to scrub, but the floor has to be flat, and on a heaving slab that means leveling compound first.
- Fixtures and finish. Kohler and similar mid-tier brands get you replaceable cartridges and a warranty that means something. Builder-grade faucets are the false economy in this room; they fail in five years and the finish peels. A new vent fan with a humidity sensor is worth the $150 and prevents the mold that starts behind bad tile jobs.
What Vanities, Tile & Fixtures Costs in Duncanville, TX
A full vanities, tile, and fixtures replacement in Duncanville runs $9,000 to $28,000. That’s the whole-room number; single-item work is far less, and we’ll quote it that way if that’s what you need.
| Line item | Typical Duncanville range |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Tile floor (per room) | $1,500 – $4,500 |
| Shower tile and pan rebuild | $3,000 – $8,500 |
| Fixture package (faucet, shower valve, toilet) | $600 – $2,200 |
| Plumbing relocation (per fixture) | $400 – $1,200 |
| Full room, gut and rebuild | $9,000 – $28,000 |
Five things push a Duncanville job toward the high end. Room size, first. Then the condition behind the wall: rotted subfloor, a cracked slab, or a cast-iron drain that crumbles when touched. Relocating plumbing or electrical adds real labor and an inspection. Material grade, tile and vanity, moves the number by thousands. And permit scope; a cosmetic swap needs less review than a drain relocation or a new electrical circuit.
A written estimate from us lists demo, disposal, substrate, waterproofing, tile, vanity, fixtures, and inspection. It typically does not include structural repair if we open a wall to a surprise, or a foundation fix if the slab has moved. We price foundation work before interior work begins for exactly this reason, so there are no mid-job change orders.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville Homes Do to This Job
Duncanville is a built-out, largely post-war bedroom city in southwest Dallas County, and almost all of the work here is renovation on 1950s – 1970s single-family homes across ZIPs 75137, 75116, and 75138. That changes the job. There’s no greenfield building to fall back on; every vanities, tile, and fixtures project is a tie-in to an aging slab, a cast-iron or early PVC drain, and an original electrical panel that has to pass modern inspection before we can add a GFCI circuit.
The expansive black clay soil across Duncanville heaves and shrinks with every wet-dry cycle, so slab cracks and out-of-level floors are routine, not unusual. We price foundation evaluation before we set a tile floor that will crack along the same fault line within a year. The North Texas climate adds its own pressure: hot humid summers mean a bathroom vent fan isn’t optional, and the moderate winter freezes are hard on exterior hose bibs and any plumbing in an unheated wall. If the vanity or shower back wall sits on an exterior wall, we insulate it while it’s open. Homeowners here often pair this interior work with Tile Roofing in Duncanville once the spring hail has done its damage, or with Specialty Roofing in Duncanville for a low-slope addition over the bath. If you’re pulling more than one room at once, this fits inside a full Bathroom Remodeling in Duncanville scope. We cover all of Duncanville and the surrounding southwest Dallas County area, and our Bathroom Remodeling service carries the same 730-Day Done Right Promise as this one.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Vanities, Tile & Fixtures in Duncanville
Two to four weeks for a full room, and 2 to 5 days for a vanity swap alone. The schedule depends on inspection timing and whether we relocate plumbing. Most jobs run in one continuous visit window. Call (844) 797-4808 for a timeline tied to your specific room.
Yes, if plumbing or electrical moves. A straight cosmetic tile and vanity swap often doesn’t require one, but relocating a drain, adding a circuit, or changing a shower valve does, and the work gets inspected. We pull the permits and pass the inspections so the record follows the house, not a handshake.
Usually, yes, and it’s the cheaper path. Keeping the drain and supply locations where they are saves $400 – $1,200 per fixture and skips a rough-in inspection. We measure the existing rough-in before ordering, because a stock vanity won’t fit an off-center drain.
$9,000 to $28,000 for a full room, with vanities from $800 to $3,000 and shower tile rebuilds from $3,000 to $8,500. The range depends on room size, what’s behind the wall, and material grade. Call (844) 797-4808 for an exact quote; estimates are free and itemized.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers the install, the waterproofing, and the finish, on top of the manufacturer warranties on Kohler and similar fixtures. The number you see on the estimate is the number you pay.
Get a Free Vanities, Tile & Fixtures Estimate in Duncanville
We’ll come out, measure the room, open nothing you don’t want opened, and hand you a written line-item estimate for your Duncanville vanities, tile, and fixtures work. No pressure, no vague range. Call (844) 797-4808 and a live person answers, day or night. We’ll book a time that fits your week and tell you upfront what the work will cost and how long it takes.
Written by the team at Groundwork Construction Co.