Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Addison: What It Actually Takes
A vinyl fence in Addison, TX usually runs $3,500 to $9,000 for a typical residential property, and most installs take two to four working days once materials land on site. That covers digging, setting posts in concrete, hanging panels and gates, and hauling off the spoil. The number that lands in your quote depends on linear footage, height, and how tight the site is. Call (844) 797-4808 and we’ll walk the property, measure, and put an upfront price in writing. No vague “starting at” hand-waves. The number you see is the number you pay.
How We Build a Vinyl Fence in Addison, Step by Step
Here’s the real sequence. Not the brochure version.
Day 1, morning: site walk and layout. We confirm the property line against your survey, mark the post line with stakes and string, and call in the 811 utility locate if it hasn’t been done. In Addison’s tighter lots, the locate and layout can eat a couple hours on their own. You decide gate positions and swing direction on this pass, because moving a gate after the posts are set means re-digging.
Day 1, afternoon: digging and setting posts. A 6-foot privacy run typically means holes every 8 feet, each around 24 inches deep and set in concrete. A typical residential run goes in over a day. You choose post-cap style and whether you want the panels set racked to follow a slope or stepped in clean tiers. Stepped looks tidier on steeper grade; racked hugs the ground.
Day 2: setting time and rails. The concrete cures. We come back, check plumb and level, and install the horizontal rails. This is also where we cut for any grade changes and confirm the top line runs true. If your property has a slope across the run, this is the day it gets reconciled. You don’t have to decide anything here; you just need to be reachable if we find something underground.
Day 3, morning: hanging panels and gates. Panels go up, gate frames go in, and hardware gets mounted. A single walk gate takes about 30 to 45 minutes to hang and adjust. Double drive gates take longer because the two leaves have to meet cleanly at the center. You check the gate swing yourself before we leave this stage.
Day 3, afternoon: punch-out and cleanup. We walk the run with you, adjust latches, touch up any scuffs, and haul off concrete spoil and cutoffs. Then final payment and the written workmanship paperwork. If anything’s off, it gets fixed before we call it done, backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Options You’ll Actually Choose Between
Most of the decisions happen before we dig. Here’s what matters.
- Privacy vs. picket vs. semi-privacy. A full 6-foot privacy panel is the most common residential choice and runs toward the top of the $3,500-$9,000 range. Picket runs shorter and cheaper. Semi-privacy (4 to 5 feet with wider pickets) suits front-yard divider lines where you want some airflow and sightline without a wall effect.
- Color and finish. White is the classic and stays bright; tan and gray read more muted and hide dust better in North Texas. Color runs through the vinyl, not painted on, so there’s no repainting. Premium grades add UV stabilizers that hold color longer under 100°F+ summers.
- Post reinforcement. Standard posts are fine for straight runs on flat ground. Steel-reinforced posts or heavier wall thickness are worth the extra on long spans, gate posts, and any run taking wind load. Ask for it on gate posts specifically. That’s where fences sag first.
- Panel style. Tongue-and-groove panels lock tight and block sightlines. Board-on-board (alternating overlapping pickets) gives a slightly different face on each side and can reduce the “good side, bad side” complaint with a neighbor.
- Gate hardware. Self-closing hinges and a latch that actually lines up beat any decorative option. Ask about the hinge material; stainless holds up better than painted steel in our heat and occasional ice.
What a Vinyl Fence Costs in Addison, TX
For most residential vinyl fence work in Addison, expect $3,500 to $9,000. Here’s what moves a job toward the low or high end.
- Linear footage and height. A short 60-foot run at 4 feet sits near the floor. A 200-foot perimeter at 6 feet with two gates pushes toward the ceiling. Footage is the single biggest driver.
- Site access. Addison properties often mean shared drives, alley access, or parking constraints that force hand-carrying materials further than usual. That adds labor time.
- Grade and terrain. Flat lots go fast. A run with a real slope needs stepped or racked panel work and more cutting.
- Material grade. Economy vinyl versus UV-stabilized premium vinyl can swing the total by 15 to 25 percent on the same footage.
- Gates and hardware. Each walk gate adds several hundred dollars; a double drive gate adds more. Heavy-duty posts and stainless hardware are a small upcharge that pays off.
A written estimate includes materials, concrete, labor, haul-off, and hardware. Ask what’s excluded: stump or root removal, old fence demolition (especially if it’s set in concrete), and any permit fees if your job needs one. Get it in writing before anyone digs. And if you’re reworking the front approach at the same time, homeowners often pair this with Asphalt Driveways & Resurfacing in Addison so the whole entry reads clean.
See the difference
Before
After
Before
After
Before
AfterWhat Addison Properties Do to This Job
Addison is a built-out commercial and multifamily enclave in ZIP 75001, and that shapes how fence work goes here. New ground-up residential construction is rare. Much of what we touch sits on 1970s-1980s low- and mid-rise properties, apartment communities, and the dense restaurant and entertainment cluster along Belt Line Road and Addison Road. That means shared drives, tight alleys, and parking that has to be planned around, not assumed. Fence runs often border a common area or a neighboring parcel, so the survey matters more than the drawing. Anything touching Town of Addison right-of-way or a shared boundary gets coordinated through the town’s building department. We pull the permits and pass the inspections so you’re not the one chasing signatures. North Texas heat and spring hail also set the calendar: exterior work gets scheduled around storm season and pushed through early mornings in July and August. And that restaurant and bar density means noise and loading hours can constrain when crews can work a shared site, which is why we plan access before the first post hole. If you’re working backward from a broader project, the full scope lives in Fence Installation in Addison, and our Fence Installation service covers the wider range of fence types if you’re still deciding.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vinyl Fence in Addison
Most residential vinyl fence installs take two to four working days. A short straight run with one gate usually lands near two; a longer perimeter with multiple gates and a grade change stretches toward four. Weather and utility locate timing are the two variables most likely to add a day. Call (844) 797-4808 and we’ll give you a realistic window for your specific property, free.
It depends on height and location. Anything near Town of Addison right-of-way or a shared boundary line typically needs a permit and inspection. We check the requirement, pull what’s needed, and coordinate the inspection so you don’t have to. Call (844) 797-4808 to find out what your property requires, and estimates are free.
In most cases, yes. Fence posts go in narrow holes spaced every 8 feet, and we can often route around existing irrigation lines, grade drains, and planted beds. We call in the utility locate first and hand-dig near anything flagged. If you have mature plantings or a sprinkler head in the path, tell us at the estimate and we’ll plan around it.
Residential vinyl fence in Addison typically runs $3,500 to $9,000, driven mainly by linear footage, height, gate count, and material grade. A short economy run lands near the floor; a long perimeter with premium vinyl and a double drive gate goes toward the ceiling. Call (844) 797-4808 for an exact written quote, and estimates are free.
Every job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Manufacturer coverage on the vinyl itself varies by product grade, and we’ll tell you exactly what your material warranty covers before you sign anything.
Get a Free Vinyl Fence Estimate in Addison
We’ll walk the property, measure the line, and hand you an upfront written quote with no surprises. Calls are answered by a live person around the clock, and every technician on the crew is background-checked and arrives in uniform. We cover Addison and the surrounding area, and if your project touches the drive approach, homeowners often pair this with Driveway Repair & Replacement in Addison. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co.