Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Dallas, TX: What It Costs and How Long It Takes
A vinyl fence in Dallas typically runs $3,500 to $9,000 for a standard residential run, and most jobs are finished in two to four days once materials land on site. You’re buying a fence that won’t rot, won’t need staining, and holds its color through a Texas summer. Call (844) 797-4808 and we’ll walk your property line with you, free. Vinyl Fence work here comes down to three things: soil that moves, wind that pushes, and a yard that has to look right from the street.
From Layout to Final Rail: How a Vinyl Fence Goes In
We don’t hand you a brochure and disappear. Here’s the actual sequence, stage by stage, so you know what’s happening on your property and when you need to make a call.
Stage 1: Property line and layout (day 1, half a day)
We pull your plat, confirm the line against your survey, and stake every post location. If we’re replacing an old fence, this is also when we confirm what’s buried – irrigation lines, gas, cable, sprinkler heads. You decide the fence height and where gates land before anyone digs. On tight Dallas lots, a few inches of placement decides whether your gate swings clear of the AC unit.
Stage 2: Demolition and haul-off (day 1, a few hours)
Old wood, rusty chain link, failing posts – it all comes out, and we haul it. This is the stage where we find out what the last crew did. We’ve pulled posts set in nothing but topsoil with a bag of Quickrete and called it anchored. You don’t need to do anything here except point out anything you want saved.
Stage 3: Post setting (day 1 into day 2)
We dig to depth and set posts in concrete. Given how Dallas clay behaves, post depth and hole width matter more here than in most markets. You decide whether corner and gate posts get the heavier gauge – we recommend it every time. Concrete needs to cure before panels go on, so this is where the schedule breathes.
Stage 4: Panels, rails, and gates (day 2 into day 3)
Rails, pickets, and gate hardware go in. We set gates to swing true and latch clean, and check post plumb as we go. You walk the line with us before we call it done.
Stage 5: Final walkthrough and cleanup (day 3 or 4)
We do a final plumb and level check, clean up the site, and walk you through the finished fence. Any adjustments get made on the spot. Then the 730-Day Done Right Promise kicks in – if something’s off, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Vinyl isn’t one product. Here’s what moves the number and what you’re trading off with each pick.
- Picket style and height: A 4-foot privacy picket runs less than a 6-foot with a top rail, both in material and in wind load. Six-foot is the Dallas standard for back yards; four-foot reads better on a front corner lot.
- Privacy vs. semi-privacy: Full-privacy panels with tight picket spacing cost more per linear foot but block sightlines completely. Semi-privacy with a gap costs less and lets wind through – which matters when a spring storm rolls through.
- Color and finish: White is the cheapest and the most common. Tan, gray, and two-tone cost a little more and hide Dallas dust better than white does.
- Post gauge and reinforcement: Standard posts are fine for most runs. Heavier gauge or steel-reinforced posts at corners and gates add cost but stop sagging over years of soil movement.
- Gates: A single walk gate is standard. A double drive gate or an automatically latched gate adds hardware cost and needs a solid post anchor.
If your vinyl run is part of a bigger outdoor plan, it’s worth pairing with Fence Installation in Dallas scope so the layout matches your other hardscape. Homeowners often pair this with Driveway Repair & Replacement in Dallas when the fence line and driveway apron share a corner.
What Vinyl Fence Costs in Dallas, TX
Plan on $3,500 to $9,000 for a typical residential vinyl fence in Dallas. That range covers most of what we install; the spread comes down to a handful of variables.
| Line item | Typical Dallas range |
|---|---|
| Standard vinyl privacy fence (per linear foot) | $28 – $55 |
| Full job, typical back-yard run | $3,500 – $9,000 |
| Gate (walk gate, added) | $400 – $900 |
| Double drive gate (added) | $900 – $1,800 |
| Old fence removal and haul-off | $300 – $800 |
What pushes a job to the high end: a longer run, heavier post gauge, multiple gates, removal of a deeply set old fence, or a line that has to be re-graded to follow a slope. What keeps it low: a short run, standard posts, a single walk gate, and no demo.
A written estimate from us is line-itemed – posts, panels, concrete, gate hardware, removal, and any grade work. What’s not included: fence staining (vinyl doesn’t need it), landscaping repair after demo, or a new survey. If you don’t have a current plat, that’s a cost to plan for separately. And because we finance at 0% for 18 months and take $1,000 off projects over $10,000, a fence paired with a larger outdoor project can stay within budget.
See the difference
Before
After
Before
After
Before
AfterWhat Dallas Homes Specifically Do to This Job
Dallas sits in the Blackland Prairie clay belt, and that clay is the single biggest factor in how a fence here gets built. The vertisols under most of the city swell when wet and shrink hard in a dry summer, which is why foundations here are designed for movement – and why fence posts that would hold fine in limestone country go loose in Dallas. We set posts deeper and wider here, and we tell homeowners honestly that a post set the way it’s done in other markets will work its way loose within a few seasons.
Housing stock matters too. The older bungalows around Oak Cliff and East Dallas often have original property lines drawn by a fence that’s been replaced three times, and pulling the old line up matters. The 1950s – 70s slab-on-grade ranches across the city have long, straight back lines that make for a clean panel run. And the infill lots going up everywhere mean we’re constantly matching a new fence to a neighbor’s fence height – an HOA matter as often as a code one. Over in Dallas, wind is the other local reality: DFW sits in a high-wind zone, so post reinforcement at corners and gates isn’t a cosmetic upgrade here, it’s the difference between a fence that survives a spring straight-line storm and one that doesn’t.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vinyl Fence in Dallas
Most Dallas vinyl fence installs finish in two to four days, weather and concrete cure permitting. The timeline stretches if the ground needs prepping or the run is long with multiple gates, and a rainy week can add a day for the concrete to set. Call (844) 797-4808 for a timeline on your specific yard – the estimate is free.
Most residential fence replacements in Dallas don’t require a building permit, but height limits, corner-lot sight triangles, and HOA rules absolutely apply. We check the limits against your lot and confirm HOA rules in writing before we order material. Call (844) 797-4808 and we’ll confirm what your property needs.
Yes, in most cases – we locate and flag irrigation, cable, and gas lines before anyone digs, and we work around sprinkler heads where we can. If a line runs exactly through a post hole, we’ll tell you up front and cap or reroute it before we set the post. Call (844) 797-4808 to walk the line with us.
No. Our estimate is fixed and line-itemed, and we don’t do change orders for things we should have caught in the estimate. The only thing that would change the number is a request you make after signing, and that gets priced and approved in writing first. Call (844) 797-4808 for a fixed quote.
Every vinyl fence we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Vinyl panels themselves also carry a manufacturer warranty against fading and cracking, which we’ll spell out in your paperwork. Call (844) 797-4808 for the details on your specific material.
Get a Free Vinyl Fence Estimate in Dallas
We’ll come out, walk your property line, and hand you a written, line-itemed estimate for a vinyl fence in Dallas – no pressure and no surprises. Calls are answered by a live person 24/7, and our technicians are background-checked and arrive in uniform. Call (844) 797-4808 and we’ll set a time that works. You can also see our full Fence Installation scope, and if you’re resurfacing the driveway while we’re at it, Asphalt Driveways & Resurfacing in Dallas is a natural pairing.
Written by the team at Groundwork Construction Co.