Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Vinyl Fence Installation Cost in Dallas?
Vinyl fence installation in Dallas typically costs $3,500 to $9,000, with most homeowners landing around $5,200 for 150 linear feet of standard 6-foot privacy fencing. That range covers materials, posts set in concrete, gates, and cleanup. Final pricing moves with footage, fence height, and how much site prep your yard needs.
We put real numbers in writing before any digging starts. Upfront pricing, no surprises, and a 730-Day Done Right Promise on the workmanship. If you want an exact figure for your property, call (844) 797-4808 and we’ll set up a free estimate.
Key Takeaways
- Dallas vinyl fencing runs $3,500 to $9,000 for typical residential lots.
- Price per linear foot lands between $23 and $60 installed.
- Our technicians have up to 12 years of experience building fences across Dallas neighborhoods.
- Permits in Dallas are often required for fences over 6 feet near property lines.
- Every project is covered by our 730-Day Done Right Promise.
Vinyl Fence Installation Cost Breakdown (2026)
Here’s how the numbers stack up when we quote a job in Dallas. These are installed prices, not just material costs, so labor and concrete are included.
| Line Item | Typical Cost Range |
|---|---|
| Base installation (150 linear ft, 6-ft privacy) | $3,500 – $6,500 |
| Price per linear foot (installed) | $23 – $60 |
| 8-foot height upgrade (per linear foot) | $8 – $15 extra |
| Single walk gate (3-4 ft, hardware included) | $250 – $600 |
| Double drive gate (10-12 ft) | $700 – $1,800 |
| Post removal of old fence | $200 – $800 |
| Old fence haul-away | $150 – $500 |
| Concrete footings (per post, if not included) | $25 – $60 |
| Dallas fence permit | $50 – $150 |
| Custom lattice top or decorative panels | $300 – $1,200 |
The two biggest levers on your total are length and height. A standard backyard in the Lakewood area might only need 90 feet of fence, which lands closer to the $3,500 floor. A half-acre spread out in Far North Dallas can push past 250 feet and move into the upper part of the range fast. Gates are the next jump because they need heavier posts, bracing, and proper hardware to swing straight for a decade.
Premium color-through vinyl (where the color runs through the material instead of being painted on) adds roughly 15 – 25% to material cost. In a Dallas summer, that upgrade pays you back. More on that below.
What Affects Vinyl Fence Installation Pricing in Dallas
Every yard is different, and Dallas yards come with their own quirks. These are the factors that move your number most.
- Total linear footage and height. This is the master lever. Most Dallas privacy fences are 6 feet tall, but some HOAs and neighborhoods near Lakewood and the Park Cities specify 8 feet. Taller fences need deeper posts and more panel, so expect $8 to $15 extra per foot.
- Soil conditions. Dallas sits on a lot of expansive clay soil (black gumbo, as locals call it). Clay swells when wet and shrinks in drought, which can heave poorly set posts within a couple of seasons. We set posts deeper and wider in heavy clay, and we may use more concrete per hole. That’s real cost, but it’s the difference between a fence that stays plumb and one that leans after two summers.
- Slope and grade. Dallas lots often have gentle or moderate grade changes. Stepped or racked panels over slopes take more labor, so plan on a small upcharge.
- Fence style and panel type. Standard privacy panel is the baseline. Lattice tops, shadowbox panels, and ornamental pickets cost more.
- Gates and hardware. A single walk gate is straightforward. A wide driveway gate needs heavier posts, cross-bracing, and usually a metal frame. It’s the single biggest add-on most Dallas properties need.
- Removing the old fence. If we’re pulling out an old wood privacy fence, add $200 to $800 for removal, disposal, and haul-away.
- Permits and HOA approval. Dallas requires a permit for most fences in front of the front building line and for fences over 6 feet. Fees run roughly $50 to $150. HOA approval is common in newer North Dallas and Plano-adjacent neighborhoods, and design review can add a week or two to your timeline.
How to Save on Vinyl Fence Installation in Dallas
You don’t have to accept the first quote, and you don’t have to pay for features your yard doesn’t need. Here’s where the money actually comes back.
- Fence the perimeter in one job. Linear footage is the biggest cost driver, but on a job this size, one continuous install beats two smaller jobs later.
- Choose a standard privacy panel over custom styles. Fancy lattice tops and fancy pickets can add $1,200 to a fence. Standard panels are strong and simple.
- Skip 8-foot height unless your HOA requires it. The small privacy gain rarely justifies $12 per foot.
- Ask about financing. We offer 0% financing for 18 months on qualifying projects, and you’ll get $1,000 off any project over $10,000. Depending on total size, you may qualify.
- Bundle with other exterior work. If you’re also replacing a driveway or upgrading a patio, doing it in one project can save you mobilization and setup costs. Our home page covers our full scope.
Free estimates are easy to schedule. Call (844) 797-4808 and we’ll walk the property and give you a written price.
Vinyl Fence Installation in Dallas: What to Know
Vinyl is a strong choice for Dallas specifically, and we say that with a few years of local installs behind us. UV exposure here is intense, and good vinyl holds color far better than wood. It doesn’t rot in our humidity or battle termites the way wood does, and it won’t attract carpenter ants the way wood privacy fencing sometimes does. It also doesn’t need annual sealing or staining, which saves real money over a decade.
The one local factor we’d flag: color-through vinyl matters here. In Dallas, the sun bakes everything. A thin-coated white vinyl fence over a decade of summers can start to gray. Color-through product holds up better.
On the safety side, we want to mention something clearly. We don’t recommend homeowners dig post holes themselves in Dallas clay soil. It’s heavier work than it looks, and hitting a buried gas or utility line is a real hazard. Texas law requires a call to 811 before any digging, and even then, some older properties in East Dallas and Oak Cliff have unmarked lines from generations of utility work. Our crews call 811 and confirm safe digging before any post goes in. We handle that on every job, and it’s part of why we’re insured and bonded.
Is Vinyl Fence Cheaper Than Wood or Aluminum in Dallas?
Up front, wood is often cheaper: a standard wood privacy fence runs about $18 to $30 per linear foot installed in Dallas versus $23 to $60 for vinyl. But the lifetime math flips. A wood fence in Dallas typically needs staining every 2 to 3 years and starts to show rot and warp within 12 to 15 years. Vinyl needs no paint or stain, lasts 20-plus years in our climate, and stays straight and white. Our Dallas service area page has more on how we handle fences in different parts of the metro.
For comparison, aluminum fence installation in Dallas runs about $4,000 to $10,000 for a typical yard. It holds up well and looks sharp, but you lose privacy, which is the point of a vinyl fence for most Dallas homeowners.
How Long Does Vinyl Fence Installation Take?
Most vinyl fence installs in Dallas finish in 1 to 3 days. A 150-foot job with one gate typically takes two days, weather permitting. Texas spring storms and summer heat can push us to the third day. Our crews start early to get ahead of the afternoon heat in July and August.
Does Installation Cause Yard Damage?
We run all dig lines and confirm the 811 mark-outs before digging. Soil around the posts gets disturbed, and we tamp it back down to grade. We bag and haul away concrete and debris, and we sweep up the concrete dust. Grass along the fence line usually comes back within 2 to 3 weeks during the growing season. If a sprinkler line or irrigation head sits in the path of a post, we locate it first.
If any part of the install isn’t right, that’s what the 730-Day Done Right Promise is for. If it’s not done right, we make it right. No fine print, no arguments.
Why Groundwork Construction Co.
We’re a full-scope home construction partner, not a fence-only shop. That matters because a fence job touches a lot of the same things other exterior projects do – grading, utility lines, drainage, and often a concrete or paver transition at a gate. We bring background-checked, uniformed technicians to every project. Our technicians have up to 12 years of experience with fences and gates. Calls are answered by a live person, 24/7. No voicemail. No waiting until Monday morning.
We use verified brand partners across our trades, and we practice the same upfront pricing on every job. That’s how we’ve served Dallas homeowners since 2014, and it’s the basis of our 730-Day Done Right Promise on every project, from fence to kitchen and everywhere in between.
Ready for a price? Call (844) 797-4808 for a free estimate.
FAQs – Vinyl Fence Installation Cost in Dallas
How much does vinyl fence installation cost in Dallas?
Vinyl fence installation in Dallas costs $3,500 to $9,000 for most homes. Expect $23 to $60 per linear foot installed, including posts, concrete, and gates. Call (844) 797-4808 for a firm price for your property.
Is it cheaper to repair or replace a vinyl fence in Dallas?
If your vinyl fence has a few cracked panels, repair usually runs $400 to $1,500 and is worth it. If more than 25% of the fence is damaged or the posts are heaving from Dallas clay soil, replacement is usually cheaper than repair long term, and that replacement runs $3,500 to $9,000. Our team can give you both figures in a single visit.
What is the most common vinyl fence installation problem in Dallas?
Post heaving in expansive clay soil is the most common problem we see in Dallas. Clay swells and shrinks with our wet-dry cycles, which loosens shallow post footings. We set posts deeper and with more concrete. The other common issue is UV fading on thin-coated vinyl; color-through product solves it. Neither is something to fix yourself. Call (844) 797-4808 for a team that handles this correctly.
How much does a vinyl privacy fence cost in Dallas?
A standard 6-foot vinyl privacy fence costs $4,500 to $8,500 for a typical Dallas backyard of 150 to 200 linear feet. 8-foot height adds $8 to $15 per foot. Call (844) 797-4808 to lock in an exact figure.
How much does 100 feet of vinyl fence cost in Dallas?
100 linear feet of 6-foot vinyl privacy fence costs $2,300 to $6,000 installed in Dallas. The low end assumes open, flat ground and a standard panel; the high end includes gates, slope work, and old fence removal. Call (844) 797-4808 for a precise number.
Pricing reflects the Dallas market as of 2026. Groundwork Construction Co. of Dallas offers free estimates – call (844) 797-4808.
What Our Customers Say
"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett