Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Farmers Branch, TX: What It Costs and How Long It Takes
A wood fence in Farmers Branch, TX typically runs $3,500 to $9,000 for a standard residential lot, with most installs finished in 3 to 5 working days once materials are on site. You’re choosing between cedar and pressure-treated pine, deciding height and post spacing, and lining up a permit through the city before the first post goes in the ground. Call (844) 797-4808 and we’ll walk your property line, measure the run, and give you a written, line-item estimate at no cost.
How a Wood Fence Goes In, Stage by Stage
Every yard is different, but the sequence for a wood fence in Farmers Branch doesn’t change much. Here’s what actually happens, in order, and what you decide at each point.
1. Walk the line and confirm the run (day 1, about an hour)
We meet you on site, walk the property boundary, and mark corners. You decide the fence height, the style (dog-ear, flat-top, or shadowbox), and whether gates land at the driveway, side yard, or both. If any part of the line runs close to a neighbor’s structure or a utility easement, we flag it now, not after the holes are dug.
2. Locate before we dig (day 1 – 3, depends on the city)
Texas requires calling 811 before excavation. Underground utilities get marked, usually within 2 to 3 business days. On older Farmers Branch lots, we sometimes find irrigation lines, old gas stubs, or a buried power feed to a detached shop. Better to find them on a schedule than with a shovel.
3. Demo and haul-off (day 2, half to a full day)
If an existing fence is coming out, we pull panels, dig out old concrete footings, and haul it away. Old footings are the part most bids skip. If your yard has thirty-year-old posts set in bell-shaped concrete, that’s real labor, and it should show up in the estimate.
4. Set posts and frame (day 3, a solid day)
Posts go in at 6 to 8 foot spacing, set in concrete below the frost-depth local code calls for, plumb and level. Rails and framing go up next. We use galvanized fasteners, not staples. You’ll see the skeleton by the end of the day.
5. Pickets, gates, and cleanup (day 4 – 5)
Pickets get installed, gates get hung and swing-tested, and the yard gets cleaned. We walk the finished fence with you, check every gate latch, and hand over the paperwork on the 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decision comes down to three things: species, thickness, and how far apart the posts sit. Here’s the honest trade-off on each.
- Western red cedar: The premium choice. Natural rot resistance, takes stain beautifully, and looks the way most homeowners picture when they say “wood fence.” It costs more up front and still needs re-staining every 3 to 5 years. Best for homes where curb appeal matters.
- Pressure-treated pine: The workhorse. Cheaper by roughly 25 to 35 percent, comes pre-treated against rot and insects, and handles North Texas heat well. It’s greener and heavier at install and will twist a little as it dries. Best for long runs or budget-conscious projects.
- Dog-ear vs. flat-top pickets: Dog-ear (both top corners cut) resists warping at the ends and is the more traditional look. Flat-top is cleaner and matches mid-century ranch architecture well. Shadowbox alternates pickets on each side so both neighbors see a finished face.
- Post spacing: 8 feet is standard. 6 feet costs more in posts and concrete but holds up better in our straight-line windstorms. On exposed lots near Valley View or open acreage, we lean toward 6.
- Height: 6 feet is the residential default. 8-foot sections give more privacy but take more material and more bracing. Anything above 6 feet may change what the city wants to see on a permit.
- Finish: Clear sealer, semi-transparent stain, or solid color. Clear lets cedar weather gray naturally. Solid color holds the longest but needs the most prep work each time.
What a Wood Fence Costs in Farmers Branch, TX
Plan on $3,500 to $9,000 for a typical residential wood fence in Farmers Branch, depending on run length, material, and site conditions. That’s the honest range, and here’s what pushes a job toward one end or the other.
| Line item | Typical range |
|---|---|
| Wood fence install (standard lot) | $3,500 – $9,000 |
| Cedar upgrade over pine | +25% to +35% |
| Old fence demo and haul-off | $300 – $900 |
| Extra gate (single, walk-through) | $250 – $500 |
| Stain or seal finish | $400 – $1,200 |
What moves the number: total linear feet (a half-acre lot is a different project than a quarter-acre), material species, post spacing, whether old footings have to come out, and how much clearing the line needs before we can dig. What’s included in our written estimate: materials, labor, concrete, fasteners, haul-off, permit application, and final cleanup. What typically isn’t: landscape repair after the fact, sprinkler rerouting, and any surveying a disputed property line may require. Calls are answered by a live person around the clock, and the number you see on the estimate is the number you pay. Homeowners often pair this with Paver Driveways in Farmers Branch when the front yard is getting a full refresh at the same time.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Job
Farmers Branch is a small, fully-built-out inner-ring Dallas suburb (ZIP 75234) where almost no new residential land exists. That changes the whole job. There are no subdivision plat lines to follow here, so most of our work happens on lots where a fence is going up against a 1950s-to-1970s ranch home, a small post-war cottage, or a recently rebuilt property sitting where an older house was scraped. Along the southern edge, near Brook Hollow and Marsh Lane, those lots blend right into Dallas, and property lines can be tight and quirky. Out toward the I-35E and Valley View corridor, we’re often fencing light-industrial or shop buildings on acreage, which means longer runs, heavier gates, and bracing that stands up to wind.
Two local conditions shape every install. First, blackland prairie clay under the soil swells and shrinks hard between droughts and wet springs. A post set 24 inches in this ground can heave over time. We set deeper and use concrete generously to lock posts in, because a sagging fence line is almost always a footing problem, not a wood problem. Second, the city enforces codes and permits on older properties more aggressively than many assume. Permit requirements for a fence in Farmers Branch depend on height and placement, and a fence over 6 feet in many zones will need one. Our team handles the application, and we don’t start digging until the permit is in hand.
Because almost nothing here is greenfield, wood fence work in Farmers Branch gets layered onto Fence Installation in Farmers Branch projects that also touch the driveway or the yard grade. If yours does, it’s worth planning both at once. If the driveway is on your list, Concrete Driveways & Concrete Work in Farmers Branch often runs alongside a fence install. And if you’ve ever looked at the wider scope of fencing options and only need a refresh of an existing line, our Fence Installation service covers the range.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Farmers Branch
A standard residential wood fence is finished in 3 to 5 working days once materials arrive, with the 811 locate adding 2 to 3 business days before we can dig. Larger acreage runs and jobs requiring old footing removal can stretch to 6 or 7 days. Call (844) 797-4808 for a firm schedule after we walk the line.
Often yes. Farmers Branch requires a permit for fences above certain heights and for those placed near property lines, and the city is strict about code enforcement on older properties. We pull the permit for you as part of the project. Call (844) 797-4808 and we’ll confirm what your specific lot needs.
Usually not, but older Farmers Branch lots sometimes have irrigation, gas stubs, or a buried feed line under the fence run. We locate everything through 811 before digging, and we plan around sprinkler heads and downspouts. No surprises after the first hole.
Expect $3,500 to $9,000 for a standard residential lot, with cedar pushing toward the high end and pine toward the low end. Old fence removal, extra gates, and stain finish add to that. Call (844) 797-4808 for a written, line-item estimate at no cost.
Every install is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s backed in writing. Call (844) 797-4808 for the full details before any work starts.
Get a Free Wood Fence Estimate in Farmers Branch
Stop guessing at what a wood fence should cost. Call (844) 797-4808 and a live person will pick up, day or night. We’ll schedule a free on-site estimate, measure the line, walk you through material options and the permit, and leave you with a written price you can compare against any other bid. If financing helps, we offer 0% for 18 months, and $1,000 off projects over $10,000. Then you decide. We’re glad to handle your fence anywhere in Farmers Branch.
Written by the team at Groundwork Construction Co.