Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in University Park, TX: What It Costs and What You Get
A wood fence in University Park, TX typically runs $3,500 – $9,000 for a residential lot, and most jobs are finished in three to five working days once materials land on site. The number depends on linear feet, height, cedar versus treated pine, and gate count. Call (844) 797-4808 and we’ll walk your lot, measure the actual run, and put a written line-item quote in your hands at no cost.
How We Build a Wood Fence in University Park, Stage by Stage
Fence work looks simple from the street. The parts that decide whether a fence is still straight in eight years happen before a single picket goes up. Here’s the sequence we run, and where your decisions land.
Stage 1 – Site walk and layout (day one, about an hour). We measure the property line against your survey, mark post spacing on the ground, and identify what’s underneath. University Park alleys and side yards regularly hide irrigation lines, old gas stubs, and cable runs that nobody documented. You decide the exact run and where gates go. We confirm setbacks at this point, not after we’ve dug.
Stage 2 – Removal and hole digging (day one to two). If there’s an existing fence, it comes out and goes to the curb for haul-off. Post holes get dug to depth and set in concrete, which then needs to cure before anything heavy is hung on it. On black-clay soil this step matters more than it does on sand – holes that aren’t deep enough will heave after a wet spring. You don’t need to be home for this part.
Stage 3 – Posts, rails, and framing (day two to three). Posts get plumbed and braced, then rails go on. This is the stage where you approve rail configuration (two-rail or three-rail) and confirm gate swing direction. If you want a gate to clear a slope or a driveway apron, this is the moment to say so.
Stage 4 – Pickets and gates (day three to four). Boards go up, dog-ear or flat-top, with the board spacing you picked. Gates get framed, hung, and tested for sag. You walk the line with us before we call it done.
Stage 5 – Cleanup and final walkthrough (day four to five). We haul off debris, rake the disturbed ground, and walk the fence with you board by board. Anything that isn’t right gets fixed under our 730-Day Done Right Promise – if it’s not done right, we make it right.
Most jobs here are one crew, one visit, single-digit days. Where it stretches is access: narrow side yards and mature live oaks mean we sometimes hand-carry materials instead of backing a trailer to the line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Options You’ll Actually Choose Between
Wood isn’t one product. Here’s what University Park homeowners end up weighing.
- Western red cedar – the premium pick. Naturally rot-resistant, takes stain beautifully, and holds its color longer than anything else in this climate. Costs more per linear foot, and it’s what most custom-home owners choose when the fence is visible from the house or the pool.
- Treated pine – the value choice. It’s pressure-treated for ground contact and holds up fine, but North Texas sun will gray it within two seasons unless you seal it. Best when the fence is a boundary line nobody looks at.
- Cedar versus pine for posts – we recommend cedar or a rated treated post set in concrete regardless of what the pickets are. Post failure is what kills fences here, not board failure.
- Height: 6-foot versus 8-foot – 6-foot is the standard privacy height and the easiest to get approved. 8-foot gives real screening against a two-story neighbor, but it catches more wind and needs closer post spacing.
- Board style – dog-ear, flat-top, or a board-on-board double-sided build for a neighbor-facing line where both sides should look finished. Board-on-board costs more in material and labor; it’s the right call on a shared property line with a nice view on both sides.
- Gates and hardware – a pedestrian gate, a double drive gate, or a self-closing pool gate with rated hardware. Each gate adds cost, and a drive gate adds real cost because the posts and frame have to be built for the load.
What a Wood Fence Costs in University Park, TX
Plan on $3,500 – $9,000 for a standard residential wood fence in University Park. The low end covers a shorter treated-pine run with one gate; the high end is a full-perimeter cedar build with board-on-board styling and multiple gates.
Five things push that number up or down:
- Linear feet. The single biggest driver. A 50-foot side-yard run and a 300-foot perimeter are different jobs entirely.
- Material grade. Cedar over treated pine, board-on-board over single-sided, and post species all move the total.
- Existing fence and demo. Tearing out and hauling an old fence adds labor and dump fees. A fence set in old concrete footings takes longer to remove than one that isn’t.
- Access and staging. Tight side yards, alley deliveries, and tree canopies that block equipment all add time. On a landlocked lot with a mature oak over the line, that’s real.
- Gates and terrain. Each gate is a discrete line item. Sloped ground along the run means stepped panels and more cutting.
Your written estimate lists posts, rails, pickets, concrete, gates, hardware, demo, and haul-off line by line, so the total is the total. Upfront pricing, no surprises. What typically isn’t included: fence stain or sealer (we can quote it), landscape repair beyond raking, and any survey work if the property line is in question.
See the difference
Before
After
Before
After
Before
AfterWhat University Park Lots Do to a Wood Fence Job
University Park is built out. There’s essentially no vacant land here, which means almost every fence project is a replacement or a line adjustment on a lot that already has a house, a pool, and a mature live oak sitting somewhere inconvenient. In the 75225 blocks around Caruth Park and along the narrow side streets off Preston, we routinely work with 50- to 70-foot lots where the side-yard setback leaves a fence line squeezed between the house and the neighbor’s air conditioning unit. That changes the job: posts get hand-set, materials get carried, and tree protection becomes part of the plan rather than an afterthought.
The soil matters too. North Texas black clay expands and contracts hard with our wet springs and dry summers, and pier-and-beam homes on the older 1920s-to-1950s stock move with it. A fence that’s set with shallow footings will lean within a few seasons no matter how good the lumber is, so we set deeper and we brace. The city permitting and inspection process here is thorough and treats rebuilds as routine, so a fence replacement is a straightforward path; if your project is part of a full Fence Installation in University Park scope with new gates or a pool enclosure, we coordinate the whole thing. Homeowners often pair this with Paver Driveways in University Park when the fence line meets a new drive apron, or with Concrete Driveways & Concrete Work in University Park when the gate posts need a poured footing pad. Our fence installation service covers the wider scope, and you can see everything we do across University Park on our service-area page.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in University Park
Most residential wood fences in University Park are finished in three to five working days, weather permitting. A short side-yard run can be done in two days; a full-perimeter cedar build with multiple gates runs closer to five. Summer heat compresses our exterior schedule, so we start early and plan around the peak afternoon hours.
Fence replacement and new fence construction in University Park generally require a permit, and height rules apply, so we confirm the requirement for your specific lot before we order material. We handle the paperwork and the inspection. If your fence is part of a larger project, the permit scope gets worked into the same plan.
In most cases, yes. We locate irrigation lines and utility runs before digging, and we hand-dig near anything we can’t confirm. The exceptions are old cast-iron plumbing or gas stubs running right along the fence line on a 1920s-era lot here – if we hit something unexpected, we stop and talk to you before proceeding. Protecting existing trees is part of the plan, not something we figure out mid-dig.
A wood fence in University Park typically runs $3,500 – $9,000 depending on linear feet, material grade, gates, and demo. Cedar with board-on-board styling sits at the top; treated pine with a single gate sits at the bottom. Call (844) 797-4808 for an exact quote – estimates are free and itemized.
Every wood fence we build is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That covers workmanship: posts that lean, gates that sag, boards that weren’t set properly. Wood is a natural material and will weather; routine sealing is maintenance, not a warranty claim, and we’ll tell you that upfront.
Get a Free Wood Fence Estimate in University Park
Call (844) 797-4808 for a free on-site estimate on your wood fence in University Park. We’ll walk the line with you, measure the actual run, check what’s underground, and hand you a written, line-item quote so you know exactly what you’re paying for before anyone digs. A live person answers that number any hour of the day. Estimates are free, and upfront pricing means the number you see is the number you pay.
Written by the team at Groundwork Construction Co.