Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDoor Installation Near Me in Dallas, TX: Why the Frame Matters More Than the Door
If you’re searching “door installation near me” in Dallas, here’s the short answer: a proper installation starts with checking whether your door frame is still square, and in Dallas it often isn’t. Our technicians have up to 12 years of experience hanging entry, patio, and storm doors across the city, and we re-verify the rough opening before a single hinge goes in. Groundwork Construction Co. of Dallas handles the whole scope with upfront pricing and a 730-Day Done Right Promise. Call (844) 797-4808 and a live person answers, day or night.
Your Door Sticks in August. That’s the Clay Talking.
A new door hung in a racked frame will stick by next dry season. Dallas clay moves enough in a single drought year to show it.
The Blackland Prairie vertisols under most of Dallas swell when wet and shrink hard when dry, and that cycle racks door rough openings out of plumb by as much as 3/8 inch over a season. A door that swings clean in a wet March can drag on the strike plate by August. Generic install crews measure the opening once, screw the frame in, and leave. Then you’re the one adjusting hinges every fall.
We do it differently. Before hanging anything, we check the king-stud-to-sill connection and confirm the opening is plumb, level, and square within tolerance. Where the frame has moved, the fix is a shimming strategy that splits the difference and adjustable hinge hardware that lets you fine-tune the door as the season shifts. That’s the step that keeps a door working through Dallas’s wet-dry cycle instead of fighting it.
You’ll see the same soil story in foundation work all over the city: post-tension slabs, drilled piers, root barriers, engineered letters tied to foundation repair permits. Doors are where that movement shows up first, at eye level, every morning.
What Changes on an Infill Job in East Dallas or Lake Highlands
Plenty of the door work we do in Dallas isn’t a simple swap. It’s new framing going up next to existing masonry veneer, which is the story across East Dallas and Lake Highlands infill lots. That’s where the details separate a watertight install from a callback six months later.
The tie-in flashing and weather barrier integration have to be lapped and sealed correctly where the new frame meets old brick or stone. Get that wrong and the first driving spring storm finds the gap. We treat the flashing detail as part of the door installation, not an afterthought, because in Dallas’s hail-and-straight-line-wind season it’s the difference between a dry wall and a wet one.
DFW also sits in a high-wind zone. Exterior units need to be rated for the design pressures that come with that, which is why we install Andersen and Marvin entry and patio doors rated for this market. Not whatever happened to be on the supply house floor that week. Windows and doors are one of our seven core service lines, so the same standard carries over to every opening on the house. You can see the full range on our Windows & Doors page.
Common Scenarios We Walk Into Around Dallas
Door projects in Dallas tend to fall into a handful of patterns. Here’s what we actually see:
- Pre-war pier-and-beam bungalows in Oak Cliff. The house has settled in its own way over decades. The opening is rarely square, and the fix is patience with shims, not force.
- 1950s to 1970s slab-on-grade ranches. These are everywhere across the city, and the slab-on-clay movement is why the door that worked for the last owner won’t latch for you.
- Teardown-rebuild infill projects. New framing meeting old veneer. Flashing and barrier tie-in are the whole job.
- Full entry, storm, and patio door bundles. Homeowners who want all three done at once and financed as one scope, rather than phased over several years.
- Post-storm swaps. Severe spring hail and wind take out glass and frames. Impact-rated replacements make sense here, and they tie back to the same high-wind design pressures.
Who’s Standing at Your Front Door Matters
When the crew is working on your home’s primary entry point, the identity of the people on the job site matters more than on any other trade. Every Groundwork technician is background-checked and arrives in uniform. You’ll know who’s at your door before you open it.
Pricing is upfront too. The number you see is the number you pay, and the 730-Day Done Right Promise covers the workmanship in writing. If it’s not done right, we make it right.
What Does Door Installation Cost in Dallas?
Entry and patio door installation in Dallas typically runs from about $1,200 for a standard entry unit to $6,500 or more for a large, impact-rated patio door with premium hardware. Ranges depend on the unit, the frame condition, and whether the opening needs correction before hanging. Here’s how the line items shake out:
| Scope | Typical Dallas Range |
|---|---|
| Standard entry door, single | $1,200 – $3,500 |
| Premium entry door (Andersen / Marvin) | $3,000 – $6,500 |
| Patio door, sliding or French | $2,500 – $7,000 |
| Storm door, installed | $400 – $1,200 |
| Frame correction / rough opening repair | $300 – $1,500 |
| Bundled entry + storm + patio (financed) | Custom quote |
A full entry, storm, and patio door project can be bundled into one scope with 0% financing for 18 months, and projects over $10,000 take $1,000 off. That means you’re not phasing doors over several budget years. Estimates and design consults are free. For comparison, whole-home Dallas service area window and door packages are priced separately from single-door jobs.
FAQs
Most single entry door installations in Dallas land between $1,200 and $3,500, while premium Andersen or Marvin units with frame correction run $3,000 to $6,500. Patio doors start around $2,500. Call (844) 797-4808 for an exact quote, estimates are free.
Yes, in most cases. A standard entry or storm door swap is often completed in a single visit once the unit is on site. Jobs that require rough opening correction or flashing work next to existing masonry take longer, and we’ll tell you which you’re looking at before we start.
Dallas’s expansive clay soil moves with the wet-dry cycle, and that movement racks the door frame out of plumb seasonally. It can shift the opening by up to 3/8 inch over the course of a year. Adjustable hinge hardware and a proper shimming strategy account for that shift so the door keeps working year-round.
Repair wins when the slab and unit are sound and only hardware or alignment has drifted. Replacement wins when the door is warped, the frame is rotted, or you’re upgrading to impact-rated glass for Dallas’s high-wind zone. We’ll give you both numbers with upfront pricing so you can decide. Call (844) 797-4808 to book a free estimate.
Get a Straight Door Estimate in Dallas
Foundation movement, infill flashing details, and high-wind ratings are the three things that decide whether a new door still works next August. We handle all three, backed by the 730-Day Done Right Promise and technicians who arrive in uniform and checked. Call (844) 797-4808 for a free estimate. Live person, 24/7. Start at our home page or book a design consult today.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas, TX.
What Our Customers Say
"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett