Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Highland Park, TX: What It Costs and How It Works
An aluminum fence in Highland Park, TX typically runs $3,500 to $9,000 for a standard residential run, and most jobs wrap in three to five working days from layout to final inspection. The number climbs with height, ornamental detailing, automation, and the approvals a lot-line fence triggers under Town of Highland Park rules rather than Dallas codes. Call (844) 797-4808 for a free on-site estimate and a written, line-item quote.
How an Aluminum Fence Project Actually Runs in Highland Park
Aluminum fencing is a short project with a long front end. The install is fast; the survey, permitting, and material lead time are what you’re really scheduling around. Here’s how a typical run breaks down.
Stage 1: Site walk and layout (day 1, about 60 – 90 minutes)
We walk the property with you, mark the proposed run, and confirm the fence style, height, and color. This is where you decide whether you want a 4-foot, 5-foot, or 54-inch panel and whether the run is ornamental (open pickets) or semi-private (with privacy inserts). You’ll also confirm gate locations and swing direction. On Highland Park lots, this is the step where we flag tree-protection zones, narrow side yards, and shared property lines that need a surveyor’s stamp.
Stage 2: Survey and permitting (days 1 – 10)
Highland Park requires a formal plot plan for any fence on a lot line, and the town’s design review process applies if the fence fronts a street or abuts a corner. We pull the permit, submit the plan, and coordinate with the town’s development office. You decide whether to pursue a variance if the fence would sit inside a required setback. This is the longest stage, and it’s the one most homeowners underestimate.
Stage 3: Utility locate and tree protection (day 2 of the build window)
Before any post goes in, we call for utility locates and install tree-protection fencing around any pecan or live oak within the root zone. Highland Park’s mature canopy is a real constraint here: we cannot trench or auger through a protected root zone without town approval, so post spacing sometimes shifts by a foot or two to clear a tree.
Stage 4: Post setting and panel install (days 2 – 4)
Posts get set in concrete footings sized to the fence height and your soil profile. North Texas expansive clay means we go deeper than a typical spec: 24 to 30 inches depth is standard, and we add a gravel base for drainage. Panels and pickets go on the next day once the concrete cures, followed by gates, hinges, and latches. A standard 150-foot run is typically a two-day build for our crew.
Stage 5: Final walk and punch list (day 4 or 5)
We walk the run with you post by post. You’ll check gate swing, latch tension, alignment, and finish. Any adjustment gets made on the spot or scheduled within 48 hours. The town inspection usually follows within a week, and we handle that scheduling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Choices You’ll Actually Make
Aluminum fence isn’t one product; it’s a family of them, and the differences show up years later. Here’s what you’re picking between:
- Residential-grade vs. commercial-grade aluminum: Residential runs use thinner walls (typically 0.045 to 0.055 inches); commercial grade goes to 0.080 or heavier. For a Highland Park side yard or backyard run, residential is usually enough. For a fence fronting a street or protecting a pool, commercial-grade is worth the extra cost.
- Powder-coated finish vs. mill finish: Powder-coating is the standard and adds 10 – 15 years of finish life. The most common colors are black, bronze, and architectural gray. Mill finish is cheaper but oxidizes and looks dull within a few seasons.
- Rackable vs. level panels: Rackable panels follow sloped ground without leaving gaps at the bottom. Highland Park’s clay-heavy yards often have uneven grade changes, so rackable panels are usually the better call.
- Ornamental pickets vs. privacy inserts: Ornamental pickets (open, decorative) suit front-yard and street-facing runs. Privacy inserts give a solid look at roughly 40% higher cost per linear foot.
- Gate hardware: Manual latch, self-closing hinge, or automated gate. Automation adds meaningful cost but is common on Highland Park driveways where a front gate solves a curb-appeal and security need at once. Homeowners often pair this with Driveway Repair & Replacement in Highland Park when a new gate changes the driveway apron layout.
What an Aluminum Fence Costs in Highland Park, TX
The $3,500 to $9,000 range covers a typical residential run of 100 to 200 linear feet at standard height with a single gate. Here’s what pushes a job to one end or the other:
| Factor | Typical Range |
|---|---|
| Base install (100 – 150 linear ft, standard height) | $3,500 – $5,500 |
| Extended run (150 – 250 linear ft) | $5,000 – $7,500 |
| Commercial-grade upgrade | +$400 – $1,200 |
| Privacy inserts | +$15 – $30 per linear ft |
| Automated gate | +$1,200 – $3,000 |
| Survey and permit | $300 – $600 |
| Tree-protection plan (if required) | $150 – $400 |
Linear footage is the biggest lever. So is the number of gates, gate style, and whether the run follows a curve or slope. Grade changes that require stepped panels add labor. So does any run that crosses a utility line or needs a relocated irrigation head.
What’s included in our written estimate: materials, labor, concrete, utility locates, tree-protection measures, gate hardware, and permit coordination. What’s not: a survey if you don’t have a current one, any variance filing fee, and major site correction like removing an old fence (that’s usually a separate $300 – $800 line). Estimate pricing is fixed; if we find a problem mid-build, we stop and quote the change before proceeding.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Do to an Aluminum Fence Job
Highland Park isn’t a suburb where fences go into open yards; it’s a nearly built-out enclave of 1910s – 1930s Tudor, Colonial, and Mediterranean homes on tight, tree-canopied lots. That shapes this job in specific ways.
First, permitting runs through the Town of Highland Park’s own development office, not Dallas. Submissions go through the town’s design review process, and lot-coverage and setback rules apply even to fences. If your property sits on a lot that’s been expanded or rebuilt lot-line to lot-line, the fence line often needs a boundary survey before we can submit anything. Second, the mature pecan and live oak canopy over narrow streets like Beverly Drive and Euclid Avenue means material deliveries and any crane-assisted gate install often need a tree-protection plan and a coordinated street-use approval. Third, the expansive clay soils behind these older homes move, and a fence post set to a shallow spec will lean within a season or two. We set deeper footings and account for grade movement in the post layout.
If you’ve already been working through exterior updates as part of a full Fence Installation in Highland Park project, the aluminum run is often the last piece. It also pairs naturally with Patios, Walkways & Pool Decks in Highland Park when a new fence encloses a backyard hardscape. Our Fence Installation service covers the full material range, and we handle jobs across Highland Park and neighboring ZIP 75205.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Highland Park
Three to five working days on site, plus one to three weeks for permitting. The build itself is fast; the front-end approvals under Town of Highland Park rules are what set the overall calendar. Call (844) 797-4808 to schedule a site walk and get a schedule estimate.
Yes. Any fence on a lot line in Highland Park requires a permit through the town’s development office, along with a plot plan or survey. We handle the submission and the inspection scheduling. If you’re unsure whether your fence line crosses a setback, we’ll flag it on the site walk.
In most cases, yes. We hand-dig around protected roots, route posts to avoid irrigation lines, and pull utility locates before any digging. Where the run must cross a tree’s root zone, we coordinate tree-protection measures with the town. You’ll know before we start whether any landscaping will be disturbed.
Most residential jobs land between $3,500 and $9,000, depending on linear footage, height, finish, gate count, and whether you add privacy inserts or gate automation. A written line-item estimate covers materials, labor, concrete, permit coordination, and all site work. Call (844) 797-4808 for an exact quote; estimates are free.
Our work is covered by the 730-Day Done Right Promise: if anything we installed fails in that window, we make it right. Powder-coated aluminum panels from reputable manufacturers also carry their own finish warranties, and we’ll walk you through that coverage in the written estimate.
Get a Free On-Site Aluminum Fence Estimate in Highland Park
Call (844) 797-4808 to schedule a free on-site estimate for your aluminum fence in Highland Park. We’ll walk the property, measure the run, review the town’s permitting requirements, and leave you with a written line-item quote. No surprises, no vague numbers, no pressure. If you’re also weighing a driveway or patio update, ask about bundling.
Written by the team at Groundwork Construction Co.