Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in University Park, TX: What the Job Actually Involves
Cabinets and countertops in University Park, TX usually run $14,000 to $45,000 for a full tear-out and replacement, with most jobs finishing in two to four weeks from demo to final caulk. Cabinet installation alone lands between $4,000 and $13,000; countertops between $2,000 and $6,500. Call (844) 797-4808 and we’ll walk your kitchen, measure the actual layout, and hand you a line-item number before anyone touches a screwdriver.
This page is about the cabinet-and-countertop job specifically, not a whole-kitchen rebuild. If your project runs wider than that, our Kitchen Remodeling in University Park page covers the full scope. Here we stay on the boxes, the doors, the stone, and what it takes to get them level, square and paid for without surprises.
How We Run a Cabinet & Countertop Job, Stage by Stage
A cabinet and countertop replacement has a rhythm. Miss a step and the stone doesn’t fit the boxes, or the boxes don’t fit the room. Here’s the sequence we follow on nearly every University Park job.
Stage 1: Measure and template (day 1)
We measure the walls, not just the cabinets. In older University Park homes the walls are rarely plumb, and a 1920s pier-and-beam cottage can be out of square by an inch over eight feet. We note every outlet, gas stub, water line and vent, then decide what stays and what moves. This is where you commit to a layout: same footprint or a change. Changing the footprint is the single biggest cost driver, so we settle it here, in writing.
Stage 2: Demo and prep (days 2 – 3)
Old cabinets come out, and so does the backsplash if it’s being replaced. We cap the plumbing, kill the circuits, and check what’s behind the wall: original cast-iron drain lines, knob-and-tube wiring, or a surprise header that isn’t where the plans said. Wall repair and any electrical or plumbing relocation happens now, before new boxes go in. Skipping this step is how a two-week job becomes a five-week job.
Stage 3: Cabinet set and level (days 4 – 6)
Base cabinets go in first, shimmed and leveled, then uppers hung to the same line. Crown and light rail go on, filler panels close the gaps to the wall, and toe kick gets installed. We leave the countertop template until the boxes are dead level, because stone is cut to the cabinets, not to the room. You’ll confirm door style, finish and hardware placement during this window.
Stage 4: Template and fabricate the countertop (days 7 – 12)
A fabricator templates the installed cabinets, then cuts the slab. Quartz and granite both need a 5 to 7 day turnaround from template to install in the Dallas market. You’ll pick the edge profile and the sink cutout during this stage. This is the longest waiting period in the job, and it’s normal. Nobody is standing around; the stone shop is working.
Stage 5: Countertop set, sink, backsplash, punch list (days 13 – 18)
The slab goes down, the undermount sink gets set and sealed, the faucet connects, and the backsplash goes up if it’s in scope. Final walkthrough covers door alignment, drawer glide adjustment, caulk lines, and a check that every outlet and drain works. That’s the job. Two to three weeks, with the stone turnaround as the long pole.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decision-making on a cabinet and countertop job happens in two sittings: one for the boxes, one for the slab. Here’s what the choices really mean.
- Stock vs. semi-custom cabinets. Stock boxes are the fastest and cheapest path, but they come in fixed widths, so you’ll use filler strips to close gaps. Semi-custom (KraftMaid is the line we lean on) lets you size the boxes to the room and pick the door style, finish and interior organization. On a University Park cottage where the walls aren’t square, semi-custom usually pays for itself in fewer gaps and less patching.
- Quartz vs. granite vs. a solid-surface option. Quartz is non-porous, consistent in pattern, and doesn’t need sealing. Granite is natural, unique per slab, and needs resealing roughly once a year. Both hold up to North Texas heat and daily use. Quartz runs higher per square foot; granite can be a value pick if you’re flexible on pattern.
- Slab thickness and edge profile. A 2cm slab with a built-up edge and a 3cm slab price differently, and the edge profile (eased, beveled, bullnose) changes both the look and the labor. Pick the edge before you fall in love with a slab.
- Sink and faucet. An undermount sink paired with a Moen or Delta pull-down faucet is the standard we install most. Blanco makes a strong composite sink if you want something that shrugs off heat and won’t chip like fireclay. Confirm the sink before the countertop is templated, because the cutout is cut to it.
- Drawer and door hardware. Soft-close glides and hinges come standard on semi-custom lines. Handle style and placement are cosmetic but change the feel of the room more than people expect.
What Cabinets & Countertops Cost in University Park, TX
The honest range is $14,000 to $45,000 for a full replacement. Where you land depends on a handful of variables, and none of them are mysterious once you see them.
| Line item | Typical range |
|---|---|
| Cabinet installation (full run) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
| Full cabinet & countertop replacement | $14,000 – $45,000 |
What pushes a job to the high end: relocating the sink, range or dishwasher (new plumbing and electrical); changing the layout or adding an island; going full semi-custom with a premium stone; and correcting what’s behind the wall once demo opens it up. What keeps it low: same footprint, stock or entry semi-custom boxes, a standard quartz, and no surprises behind the drywall.
A written estimate from us includes demo, disposal, cabinet set and level, countertop template and install, sink and faucet connection, and the punch list. What it typically does not include: new appliances, flooring, wall paint, and any structural or plumbing relocation discovered mid-job. We flag those before we start, not after. Upfront pricing, no surprises. Call (844) 797-4808 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat University Park Homes Specifically Do to This Job
University Park is a built-out, landlocked Park Cities enclave. There’s essentially no vacant land, so nearly every project here is a remodel, a pop-and-add, or a rebuild on a lot that already has a house on it. That changes the cabinet and countertop job in ways a suburban kitchen never sees.
The housing stock splits two ways. The original 1920s – 1950s brick and frame cottages bring pier-and-beam or early slab foundations, original cast-iron plumbing, and knob-and-tube-era wiring. Open a wall in one of those and the cabinet job quietly becomes a plumbing and electrical correction, which is why we budget for it up front. The newer custom builds on 50- to 70-foot lots are a different animal: larger footprints, but tight side-yard setbacks and mature live oak canopies that squeeze delivery and staging. Getting a slab and a cabinet pack onto a narrow lot off an alley takes planning.
Foundation movement is the recurring theme. Black-clay soils and North Texas heat cycles mean cabinets that were level at install can rack a year later if the foundation is moving, so we shim and anchor with that in mind. If a kitchen project widens into the bath, homeowners often pair it with Walk-In Showers & Shower Remodeling in University Park or a Tub-to-Shower Conversion in University Park while the dust is already up. We cover the full University Park area, ZIP 75225 included. Permits here go through the city’s review, and any plumbing, electrical or structural change gets inspected before we close the wall.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in University Park
Two to four weeks is typical, and the countertop fabrication turnaround (5 to 7 days) is the longest single wait. Demo and cabinet set take the first week; stone install and punch list fill the second and third. A same-footprint swap stays near two weeks, while a layout change with an island pushes toward four. Call (844) 797-4808 and we’ll give you a realistic schedule for your kitchen.
A straight cabinet and countertop swap usually doesn’t require a permit, but anything that moves plumbing, electrical or a wall does. University Park’s review process is routine but real, and skipping it on a relocation can cost you at resale. We pull the permits that apply and get the inspections passed before the wall closes. Call (844) 797-4808 to talk through what your job needs.
Yes, and it’s the most common way we do it. Keeping the sink, range and dishwasher in place holds the price at the low end of the $14,000 – $45,000 range and keeps the timeline short. Moving any of those three adds plumbing and electrical work, which is where the number climbs. Call (844) 797-4808 for an exact quote on your layout.
Full replacement runs $14,000 to $45,000. Cabinet installation alone is $4,000 – $13,000, countertops $2,000 – $6,500, and an island adds $3,000 – $10,000. The variables are layout changes, cabinet grade and stone choice. Call (844) 797-4808 for a written line-item estimate, free of charge.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (844) 797-4808 to schedule your free estimate.
Get a Free Cabinet & Countertop Estimate in University Park
We’ll come measure your actual kitchen, show you the cabinet lines and stone options side by side, and hand you a line-item price before anything gets ordered. No vague bids, no vanishing crews. Calls are answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform. Call (844) 797-4808 for your free on-site estimate on Cabinets & Countertops in University Park.
Written by the team at Groundwork Construction Co.