Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in University Park, TX: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in University Park, TX runs $9,000 – $28,000 for most full jobs, with a straight shower replacement landing in the $4,500 – $12,000 range. A curbless, frameless glass walk-in with custom tile and relocated plumbing at the high end typically takes three to five weeks from demo to final walkthrough. Call (844) 797-4808 for a free on-site estimate, and we’ll give you a written line-item quote before anyone touches a wall.
How a Shower Remodel Actually Runs, Stage by Stage
We don’t hand you a date and disappear. Here’s the real sequence, so you know what to expect on day one versus week three.
Stage 1: Design and measurement (week 0). We measure the existing shower footprint, check the drain location and valve height, and confirm what’s behind the wall. In University Park’s older cottages that step often turns up original cast-iron drain lines or a previous tile-over-tile job, and we price the fix before work starts, not after. You decide the layout here: linear drain versus center drain, curbless versus low curb, niche placement.
Stage 2: Demo and rough-in (days 1 – 3). We pull the old pan, tile, and backer board down to the studs and expose the framing and plumbing. A licensed plumber relocates the drain and valve if the new layout calls for it. If we find rotted framing from a slow leak, we stop, photograph it, and get your approval on the repair before moving on. That’s the upfront-pricing promise working the way it should.
Stage 3: Waterproofing and inspection (days 4 – 6). This is the stage that separates a shower that lasts from one that fails in five years. We build a sloped mortar bed, install a bonded waterproofing membrane, and flood-test the pan. In University Park, where a permit is required for a shower that relocates plumbing or changes the drain, the rough-in and waterproofing get inspected before tile goes up. We pull that permit and meet the inspector ourselves.
Stage 4: Tile and glass (days 7 – 18). Setting the tile, grouting, and sealing depends on the size of the field and the format you pick. Large-format porcelain goes faster than a mosaic herringbone. Tempered glass gets templated after tile is set, then fabricated, which adds roughly seven to ten days of lead time. You’ll pick the glass style – frameless, semi-frameless, or a sliding panel – back at Stage 1, but we confirm final dimensions here.
Stage 5: Fixtures and final walkthrough (days 19 – 21). We install the showerhead, controls, seat, and grab bars if you want them, then run a full water test. We walk the finished shower with you, hand over the care instructions, and log the job under our 730-Day Done Right Promise so the workmanship is covered in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions happen in week one, and each one moves the price. Here’s the honest trade-off on each.
- Tile versus acrylic or solid-surface panels. Porcelain tile gives you custom sizing and a high-end look, and it’s what most University Park homeowners choose for a primary bath. Budget $6,000 – $12,000 for a tiled shower. Acrylic surrounds run $3,000 – $5,500 but show their age faster and can’t be matched to a custom footprint.
- Curbless versus low curb. A curbless (zero-threshold) entry needs the floor recessed and the drain relocated, which adds framing and plumbing time – call it $1,500 – $3,000 more. Worth it for aging-in-place or if you want the glass to read as part of the room.
- Frameless versus semi-frameless glass. Frameless 3/8-inch tempered glass runs $1,800 – $3,500 installed and gives the cleanest look. Semi-frameless saves $600 – $1,200 and hides the edges with a metal frame.
- Fixtures and finishes. Moen and Delta both make reliable thermostatic and pressure-balance valves in the $250 – $600 range per valve; step up to a rain head and hand-shower combo and figure $400 – $900. We also work with American Standard for tub-and-shower combinations if you’re keeping a tub.
- Niche, bench, and storage. A recessed niche is $200 – $450; a built-in bench or corner seat adds $400 – $900 depending on framing. These add real function and cost little relative to the shower total.
What Walk-In Showers & Shower Remodeling Costs in University Park, TX
The number for a full walk-in shower remodel in University Park lands between $9,000 and $28,000. Where you fall inside that band depends on five things, and we’ll pin all five down on the estimate.
- Size and configuration. A standard 36-by-60-inch alcove shower sits at the low end. A custom 4-by-6 walk-in with a bench and niche pushes toward $18,000 – $28,000.
- Condition behind the wall. Original cast-iron drains, knob-and-tube-era wiring, or a rotten subfloor in a 1940s University Park cottage can add $1,000 – $4,000 in repairs we discover at demo.
- Relocating plumbing or structure. Moving a drain or valve adds $800 – $2,500 depending on slab versus pier-and-beam. Removing a wall or enlarging the footprint adds both carpentry and framing time.
- Material grade. Builder-grade porcelain versus imported large-format tile or stone can swing the tile portion by $3,000 or more.
- Permit scope. A like-for-like shower replacement usually needs no permit. Relocating plumbing or changing the drain triggers one, which adds inspection time and a fee on top.
A written estimate from us lists every line – demo, rough-in, waterproofing, tile, glass, fixtures, permit, cleanup – with a fixed total. No change orders unless you approve them. What it doesn’t include is anything discovered unapproved: we bring you the number and the photo before we fix it.
See the difference
Before
After
Before
After
Before
AfterWhat University Park Homes Specifically Do to This Job
University Park is a built-out, landlocked Park Cities enclave, and the housing stock splits two ways that both affect shower work. Many blocks are original 1920s – 1950s brick and frame homes with pier-and-beam foundations and original cast-iron plumbing. Others have been scraped and rebuilt as several-thousand-square-foot custom homes on 50- to 70-foot lots. In the older homes, we plan on correcting galvanized or cast-iron drain lines behind the shower wall once they’re exposed. In the new builds, we’re often matching existing custom finishes to a level the original builder set, which means sourcing tile to match what’s already in the room.
The city’s permitting and inspection process here treats remodels and additions as routine, so shower jobs that move plumbing go through plan review and rough-in inspection predictably. North Texas heat doesn’t slow interior work, but it does mean we favor waterproofing systems that hold up to humidity swings. If you’re pairing a shower remodel with a larger project, homeowners often add a Roof Replacement & Installation in University Park or Metal Roofing in University Park while staging trades on a tight lot, and you can see the wider scope on our Bathroom Remodeling in University Park page. We cover the full University Park area, including 75225.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked, Answered Straight
Three to five weeks for most jobs, with the glass fabrication lead time often the deciding factor. A straight same-footprint replacement with a stock glass panel can finish in about two weeks. Call (844) 797-4808 and we’ll put your projected schedule in the estimate.
Yes, if the job relocates the drain, moves the valve, or changes the waterproofing assembly. A cosmetic tile-and-fixture refresh usually does not. We pull the permit when one is required and meet the inspector, so the job is documented and inspection-ready.
In most cases, yes. Keeping the drain and valve where they are holds the cost near the low end of the $9,000 – $28,000 range and shortens the schedule by a week or more. We’ll confirm during the estimate whether your existing layout supports a walk-in entry without relocation.
Between $9,000 and $28,000 for a full remodel, and $4,500 – $12,000 for a walk-in shower installation on a shorter scope. Curbless, frameless, and custom tile push toward the top. Call (844) 797-4808 for an exact quote; the estimate is free.
Every job comes with our 730-Day Done Right Promise – if the workmanship isn’t right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing on your estimate. We stand behind the tile, waterproofing, and plumbing work for those two years.
Get a Free Estimate on Your Shower
We’ll come out, measure the space, check what’s behind the wall, and hand you a fixed line-item quote for Walk-In Showers & Shower Remodeling in University Park. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every project comes with 0% financing for 18 months and $1,000 off projects over $10,000. Call (844) 797-4808 – a live person answers 24/7.
Written by the team at Groundwork Construction Co.