Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in University Park, TX: What It Costs and How Long It Takes
A vinyl fence in University Park, TX typically runs $3,500 to $9,000, and most jobs are built in two to four days once materials are on site. You’re looking at a PVC or vinyl privacy or picket fence on posts set in concrete, sized to your lot line and your setback. Call (844) 797-4808 for a free on-site estimate; we walk the property, measure the run, and hand you a written line-item price before anything gets ordered.
How a Vinyl Fence Goes In, Stage by Stage
We don’t guess at fence layout. Every run on a narrow University Park lot starts with a string line and a conversation about exactly where the property line sits, because on 50-foot-wide lots a few inches matters to your neighbor and to the city.
Stage 1: Site walk and layout (day 1, about an hour)
We locate the property pins or pull the plat, confirm setbacks, and mark the fence line with stakes and string. You decide the height (4, 5, or 6 feet, depending on what University Park allows for your lot and what your HOA wants), the panel style, and which gates you want. This is also when we flag mature live oaks in the path – root protection zones change where posts can land, and we plan around them rather than through them.
Stage 2: Utility locates and call-in (before any digging)
Texas law requires the 811 call before you excavate, and we handle it. On University Park rebuild lots the underground picture is rarely clean; irrigation lines, old gas stubs, and pool plumbing from prior work all show up. We wait for locates to clear, usually two to three business days, and adjust post spacing if needed. You don’t have to do anything here except leave a gate unlocked.
Stage 3: Demo and prep (day 1 of work, half a day to a full day)
If there’s an old fence, it comes out – panels, posts, concrete footings and all. Rotten wood picks and fence posts are the most common thing we remove in this ZIP code. We haul it off the same day so the alley stays clear. Line clearing and grading for the new run happen now too, and we set the post line so the panels sit level across the grade change. Expansive clay soil means a fence line that was straight five years ago may not be straight today, so we’re leveling to the current ground.
Stage 4: Post setting (day 1 into day 2)
Posts go in holes sized for our frost-free depth (18 to 24 inches in this part of North Texas), set in concrete, and squared to string. This is the part that decides whether your vinyl fence stays straight for 20 years or starts leaning after the first wet spring, so we don’t rush it. Concrete needs to cure about 24 hours before panels go on.
Stage 5: Panels, gates, and cleanup (day 2 into day 3, sometimes day 4)
Rails and pickets or privacy panels go up, gates get hardware and hinges, and we walk the run with you to check for wobble, alignment, and gate swing. Trim is capped and end posts finished. The whole run typically takes two to four days on a standard residential lot in University Park. If you’re pairing the fence with other exterior work – homeowners often pair this with Asphalt Driveways & Resurfacing in University Park to finish a full yard refresh – we sequence the fence first so equipment doesn’t track across new pavement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Vinyl fence isn’t one product. What you pick changes both the price and how the fence handles the North Texas sun. Here’s what actually gets chosen in University Park:
- Privacy panel vs. picket vs. ranch rail: Privacy (6-foot solid) is the most requested for backyards – it costs the most per foot but gives full screening. Picket (4-foot, spaced) runs less and suits front yards where a low profile reads correctly on the street. Ranch rail is the lightest look and cheapest per foot; on a Park Cities lot it’s mostly a dog fence, not a privacy fence.
- Standard vinyl vs. reinforced/steel-core: Standard hollow vinyl is the everyday choice and handles wind fine when posts are set right. Steel- or aluminum-core reinforced vinyl costs 20 to 30 percent more but resists impact and stays rigid in high-wind storms – reasonable on an exposed corner lot.
- Color and texture finish: White and tan are the default and cost the least. Woodgrain-textured finish and darker colors (satin black, gray, cedar-tone) add cost but hide the “plastic look” and read better against new brick. Keep in mind some HOAs in University Park restrict colors and heights, so confirm before ordering.
- Post and cap style: Standard post caps vs. decorative post caps or post sleeves. Minor cost, biggest visual impact on a finished run.
- Gate configuration: Pedestrian walk gate vs. double drive gate. Double gates add cost – wider spans need heavier hardware and more bracing – but they pay off in access to a back lot or an alley parking pad.
- Brand and panel system: We work with established PVC fence systems; matching panels and hardware from one manufacturer is what keeps the fence uniform and the warranty intact. Ask what’s in your written quote.
What Vinyl Fence Costs in University Park, TX
For a typical residential run in University Park, plan on $3,500 to $9,000. That range reflects the properties we see here – older lots with existing fences to clear, tight side yards, and real setback constraints. Here’s what moves a job from the bottom of the range to the top:
- Linear footage: The single biggest driver. A 100-foot run sits comfortably in the low-to-mid range; 180 feet pushes toward the top.
- Existing fence removal: No fence removal means less labor. Removing an old wood fence with concrete footings adds a real line item.
- Style and height: 6-foot privacy panels cost more than 4-foot picket or ranch rail. Reinforced-core systems add 20 to 30 percent.
- Gates: A double drive gate costs more than one walk gate. Each gate adds hardware and extra post bracing.
- Site conditions: Sloped or uneven terrain, root zones we have to work around, and tight alley access with mature live oaks all add labor. If you’re also re-grading a yard, the fence line may need to be re-set after – a reason many homeowners pair this with Driveway Repair & Replacement in University Park so the whole site finishes in one coordinated pass.
Your written estimate covers materials, posts, concrete, gates, hardware, removal of the old fence, and labor. It doesn’t cover what we discover after footing excavation (buried utilities or unexpected concrete), any HOA resubmittals if specs change, or repair to landscaping on the far side of the fence line. We tell you up front what’s in the scope and what isn’t. If the fence is part of a full Fence Installation in University Park project with a gate, arbor, or other fence sections, we quote it as one job.
See the difference
Before
After
Before
After
Before
AfterWhat University Park Homes Specifically Do to This Job
University Park is a built-out, landlocked Park Cities enclave – there’s essentially no vacant land here, so nearly every fence job means working around existing houses, mature live oaks, and tight side yards. Lots are typically 50 to 70 feet wide, and alleys back many blocks. That means we’re threading panel deliveries and concrete between oaks instead of staging on open ground, and it changes the plan more than any other variable on the day.
The housing stock matters too. Many properties are 1920s to 1950s brick and frame homes, some already scraped and rebuilt, and the older ones sit on pier-and-beam or early slab foundations with original cast-iron plumbing and older wiring. Before anyone digs near the fence line, we want to know where that plumbing runs. The 75225 ZIP code includes stretches where replacement fences abut irrigation systems, pool plumbing, and old gas lines – the 811 locate comes first, no exceptions.
Black clay soil and our spring storm pattern add another layer. Foundations move, grading shifts, and a fence line that was level a few years back may not be. We set posts deep and realign to current grade, not last decade’s. Older homes near the HPISD corridors often have HOA or deed restrictions on fence height and color; we ask before ordering so nobody has to pull a fence down. If you’re working with University Park permitting on a rebuild or addition and the fence is part of it, we coordinate the timing so inspections don’t stall the exterior finish. Our fence installation crews handle the full range of fence types, but a vinyl job here lives and dies on layout, locates, and post depth.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vinyl Fence in University Park
Most residential vinyl fence jobs in University Park take two to four working days once utilities are located and materials are on site. Add two to three business days for the 811 locate before work starts. Material lead time is a separate variable; ask at the estimate so you can plan around it. Call (844) 797-4808 to get a firm timeline for your lot.
It depends on the height, location, and whether your lot is under an active project or HOA restriction. Fences under a certain height on a single-family lot often don’t require a separate permit, but anything tied to a rebuild, addition, or HOA architectural review will. We confirm the rules for your specific lot before ordering. Call (844) 797-4808 and we’ll walk you through what applies to your address.
In most cases, yes, but the plan has to account for them. We call 811 before digging, work around protected live-oak root zones, and route posts to avoid irrigation, pool plumbing, and buried utility runs. If existing trees or underground lines make a section impossible, we adjust the layout rather than force it. Call (844) 797-4808 to schedule a walk-through.
Most vinyl fence jobs in University Park run $3,500 to $9,000, and the written line-item quote we give you is the price you pay unless you ask for a change. The number you see is the number you pay. If we hit something unexpected – a buried tank, unmarked utility line, or a concrete footing that wasn’t visible – we stop and talk to you before doing anything that changes the scope. Call (844) 797-4808 for an exact quote; estimates are free.
Every vinyl fence we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship on the installation for the full 730 days, and material warranties from the panel manufacturer apply separately. Our technicians bring up to 12 years of experience to the job. Call (844) 797-4808 to schedule your free estimate.
Get a Free Vinyl Fence Estimate in University Park
Call (844) 797-4808 for a free on-site estimate on your vinyl fence in University Park. We’ll walk the property line with you, measure the run, talk through panel style and gate layout, and hand you a written line-item quote with upfront pricing and no surprises. Calls are answered by a live person 24/7, and every technician who shows up is background-checked and in uniform. If you’re weighing a larger exterior project, ask about our $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co.