Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in University Park, TX
Asphalt driveways & resurfacing in University Park, TX typically run $3,500 – $9,000 for new asphalt paving and $250 – $700 for sealing, with most residential jobs finished in two to four days once the subgrade is ready. Resurfacing an existing drive (an overlay rather than a full tear-out) usually costs less than half of new paving and holds up well when the base is still sound. Call (844) 797-4808 and we’ll tell you which of the two your driveway actually needs.
How a resurfacing or new asphalt drive comes together here
Asphalt isn’t a one-day pour-and-leave job, and anyone who tells you otherwise is skipping steps that show up within two summers. Here’s what our crews actually do, in the order they do it.
Stage 1: Site walk and base assessment (day 1, about an hour)
We probe the existing base, check where water drains off the drive, and look for the soft spots that signal a failing subgrade. This is where you decide between a resurfacing overlay and a full-depth rebuild. If the base is solid and the cracks are surface-level, an overlay makes sense. If it’s pumping or rutted, an overlay just buys you a year.
Stage 2: Demolition and grading (day 1 – 2)
For a rebuild, we break out the old surface, haul it off, and re-grade the subgrade to a slope that moves water away from the garage and the house. On University Park’s tight lots, this often means hand work where a skid steer won’t fit, and staging material in the alley rather than the street. You approve the grade and drainage direction before anything gets paved.
Stage 3: Base prep and compaction (day 2 – 3)
We lay and compact the aggregate base in lifts, wetting and rolling each layer. This is the part nobody sees and the part that decides whether the asphalt lasts eight years or twenty. In the black-clay soils around University Park, we over-excavate and bring in select fill where the native soil is too plastic to compact well.
Stage 4: Paving and rolling (day 3)
Hot-mix asphalt goes down at the thickness you approved (2 inches compacted for a residential overlay, 3 inches over new base), then gets rolled while it’s still workable. You’ll decide edge treatment here: a clean straight edge, a curb, or a border course if you want a defined line against the lawn.
Stage 5: Cure and striping (day 4, plus a short cure window)
We keep traffic off it for 24 to 48 hours and hold heavy vehicles for a week. Sealing happens after the asphalt cures, typically 6 to 12 months out, which is why we schedule that as a separate follow-up rather than bundling it into the paving invoice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’re choosing between: overlay, full rebuild, or seal
The single biggest decision on an asphalt job is how much of the existing structure you keep. Here’s how the options actually differ.
- Resurfacing overlay ($2,000 – $5,500 typical). A new 2-inch asphalt layer over a sound existing base. Cheapest path, adds 8 – 12 years, and it’s the right call when the base is intact. The trade-off: it adds elevation at the garage apron and thresholds, so we check door clearances before committing.
- Full-depth rebuild ($3,500 – $9,000). Tear out and start fresh with a properly compacted base. Higher cost up front, but it’s the only option when the subgrade has failed. On the older 1920s – 1950s properties here, this is often the honest answer.
- Sealcoat ($250 – $700). A protective coat over sound asphalt. It doesn’t fix cracks or structure, it slows oxidation and keeps the surface from drying out under North Texas sun. Best done every 2 – 3 years, not annually.
- Edge and border options. A concrete curb or a paver border defines the drive and protects the asphalt edge from crumbling, which matters on narrow lots where tires ride the edge. It adds cost but extends life.
- Drainage add-ons. A channel drain or French drain at the low point. Given how much water University Park’s heavy spring storms push, this is often worth the extra spend rather than fighting ponding later.
Base materials come from standard suppliers, and we use proven aggregate and hot-mix rather than cutting corners on the mix design. If your project grows into a wider hardscape scope, this is where the work overlaps with a part of a full Driveway & Pavers in University Park plan, and we’ll coordinate the two rather than leave a seam between them.
What Asphalt Driveways & Resurfacing costs in University Park, TX
Plan on $3,500 – $9,000 for new asphalt paving on a typical University Park drive, $2,000 – $5,500 for an overlay resurfacing, and $250 – $700 for sealing. Those are the real market ranges, and here’s what pushes a job toward the top or bottom of them.
- Square footage. A standard two-car drive of around 500 square feet lands near the low end; a long alley-fed drive or a circular pull-through pushes toward the top.
- Base condition. A sound subgrade keeps you in overlay territory. A failed base means full excavation, import fill, and re-compaction, which is where the number climbs.
- Access and staging. Narrow side yards and mature oak canopies mean smaller equipment and hand labor, and that adds time and cost.
- Drainage work. Grading corrections and drain installation are line items, not freebies.
- Permits and right-of-way. If the drive meets a city street or requires a curb cut, permit scope and inspection add cost and calendar time.
A written estimate lists excavation, base material, asphalt thickness, compaction, edge treatment, disposal, and permit fees separately. What it typically does not include is sealing down the road, drainage beyond the apron, or any landscaping repair around the edges. We price it upfront with no change-order surprises, and our pricing comes with 0% financing for 18 months plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat University Park homes specifically do to this job
University Park is a built-out, landlocked Park Cities enclave where nearly every project happens on a lot that already has a house. There’s essentially no vacant land here, so driveway work is squeezed between tight side-yard setbacks and mature live oaks, and staging, delivery access, and protecting root zones become as decisive as the paving itself. The 75225 housing stock runs from 1920s – 1950s brick and frame cottages to large new custom builds on 50- to 70-foot lots, which splits the work: original drives off the alley often sit on settled or failed base, while newer builds need a clean finish that matches the architecture. The expansive black-clay soil and heavy spring storms drive foundation movement and drainage problems, so we grade aggressively away from the garage and expect to correct ponding rather than ignore it. City permitting here treats rebuilds and additions as routine, and the HPISD-driven family demand keeps schedules tight, so we build the permit window into the timeline before day one.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Asphalt Driveways & Resurfacing in University Park
A resurfacing overlay is usually two to three days; a full rebuild runs three to five days once permits and weather cooperate. Cure time adds a day or two before you park on it. Summer heat can compress exterior schedules, so we plan around the forecast. Call (844) 797-4808 for a timeline on your specific drive.
Often yes, especially where the drive meets a city street, involves a curb cut, or changes drainage in the right-of-way. Interior repaving on your own lot is typically simpler. We pull the permits and pass the inspections so you don’t have to chase the city. Call (844) 797-4808 and we’ll tell you what your project triggers.
Yes, if the base is still sound and the cracking is surface-level, an overlay saves you real money. Soft spots, rutting, or pumping mean a full rebuild is the honest call. We probe the base on-site before recommending either. Call (844) 797-4808 to schedule the assessment.
An overlay typically runs $2,000 – $5,500, full new asphalt $3,500 – $9,000, and sealing $250 – $700. Size, base condition, access, and drainage decide where you land in that range. Call (844) 797-4808 for an exact quote; estimates are free.
Every job is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers the paving we install. Call (844) 797-4808 to talk through what’s covered.
Get a free asphalt estimate in University Park
We’ll come out, probe your base, and tell you plainly whether you need resurfacing or a rebuild, with a written line-item estimate and no pressure. Call (844) 797-4808 and a live person answers, day or night. Groundwork Construction Co. of Dallas handles Driveway & Pavers across University Park, and homeowners often pair this work with a New Detached ADU in University Park or a Junior ADU & Interior Conversion in University Park when the drive becomes the access route for a bigger build. Our technicians have up to 12 years of experience and arrive background-checked and in uniform.
Written by the team at Groundwork Construction Co.