A Groundwork company - serving Dallas, TX
Iron Fence in Farmers Branch, TX | Groundwork Construction Co. of Dallas

Iron Fence in Farmers Branch - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Farmers Branch, TX: What It Costs and How It Holds Up

A wrought iron fence in Farmers Branch typically runs $3,500 to $9,000 installed, depending on linear footage, height, and whether you choose true wrought iron or a welded steel look-alike. Most residential runs take two to four days from layout to final coat. Call (844) 797-4808 and we’ll walk your property line with you and put a real number in writing.

Call (844) 797-4808

How We Build an Iron Fence in Farmers Branch, Start to Finish

Every run follows the same five stages. Here’s what happens and when, so you know exactly what you’re paying for.

Stage 1: Site walk and layout (day 1, about an hour). We mark the property line against your survey, confirm where utilities run, and flag anything underground that changes post spacing. You decide the fence height and gate placement here. This is the stage where most surprises get caught, not after the concrete is poured.

Stage 2: Setting posts (day 1 into day 2). We dig each post hole to depth, set posts in concrete, and check plumb and line as we go. Posts cure overnight before any panels go up. On Farmers Branch’s expansive clay, post depth and footer size matter more than most homeowners realize. A shallow post that holds in dry August will lean by the next wet spring.

Stage 3: Panel and picket installation (day 2 into day 3). Rails and pickets go up, spacing gets checked against code, and gates get hung and adjusted. You confirm the gate swing direction and latch style before we finalize.

Stage 4: Finishing and touch-up (day 3). We touch up welds, check every fastener, and apply finish coats where needed. Powder-coated panels arrive finished; site-welded joints get a matching touch-up coat.

Stage 5: Walkthrough (day 3 or 4). We walk the full run with you, demonstrate the gate hardware, and hand over care instructions. Any punch-list items get scheduled before we leave. Every job is backed by our 730-Day Done Right Promise, so if something shifts or loosens, we come back and fix it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Iron Fence Options You’ll Choose Between

Iron isn’t one product. The choices below are the ones that actually change how your fence looks and how long it lasts.

  • True wrought iron vs. welded steel. True wrought iron is the traditional material, heavier and more expensive, and increasingly rare on residential jobs. Welded steel is what most homeowners actually buy. It’s strong, takes a powder coat well, and costs less. We’ll tell you honestly which fits your budget and goals.
  • Powder-coated vs. painted finish. Powder coating is baked on, resists chipping and rust, and holds color far longer. Field painting is cheaper upfront but needs recoating every few years in North Texas sun. We recommend powder coat for anything you plan to keep.
  • Picket spacing and height. Standard residential heights run 4 to 6 feet. Tighter picket spacing costs more per linear foot but improves privacy and pet containment. You decide the balance between look and function.
  • Gate automation and hardware. Manual gates are the default. Self-closing hinges, keyed latches, and powered openers are add-ons. Decide this at layout, not after the posts are set.
  • Decorative elements. Finials, scrollwork, and custom panels add character and cost. Keep it consistent along the whole run or the fence looks pieced together.

For the wider project, this is often part of a full Fence Installation in Farmers Branch scope that also covers other fencing on the property.

What an Iron Fence Costs in Farmers Branch, TX

For a typical residential run in Farmers Branch, expect $3,500 to $9,000. That covers material, labor, concrete, and cleanup. Here’s what moves the number up or down:

  • Linear footage. The biggest driver. A 60-foot front run sits near the low end; a full-perimeter job pushes toward the high end.
  • Material grade. Welded steel and powder coat land mid-range. True wrought iron and heavy custom scrollwork push toward the top.
  • Height and picket spacing. Taller fences and tighter picket spacing mean more material and more labor per foot.
  • Gates. Each gate adds cost. Automation and custom hardware add more.
  • Site conditions. Slopes, existing fence removal, and hard digging conditions all add labor. On the clay in this part of Dallas County, rocky or compacted ground slows post setting.

Every estimate is written line by line, and the number you see is the number you pay. No change orders after the fact. If you want financing, we offer 0% for 18 months and $1,000 off projects over $10,000.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Farmers Branch Homes Do to This Job

Farmers Branch is a small, fully built-out inner-ring suburb in ZIP 75234 where almost no new residential land exists. That shapes fence work here. We’re almost always working around existing structures, mature trees, and older lot lines rather than on fresh ground. The housing stock runs to mid-century ranch homes and post-war cottages built from the 1950s through the 1970s, many now being remodeled or rebuilt as the city redevelops, and much of the housing near the southern edge blends into Dallas’s Brook Hollow and Marsh Lane area. That older stock means we regularly find fence posts set decades ago with little footer, and we plan for replacement rather than repair. The Blackland Prairie clay under Farmers Branch swells and shrinks hard between droughts and wet springs, so we set posts deep and check line after the first wet season. The city enforces codes and permits carefully on older properties, and we handle the permitting so the run passes inspection. If you’re also reworking the yard, homeowners often pair a new fence with Patios, Walkways & Pool Decks in Farmers Branch to finish the outdoor space in one go.

Serving Farmers Branch, TX – Our Local Coverage Area

We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in Farmers Branch

Get a Free Iron Fence Estimate in Farmers Branch

Ready to price an iron fence for your Farmers Branch property? Call (844) 797-4808 and a live person answers, any hour. We’ll ask about your property line, height, gate needs, and timeline, then schedule a free on-site estimate with a written line-item quote. You’ll know the real number before anyone digs. That’s our fence installation service across Farmers Branch, and we’re glad to walk your lot.

Written by the team at Groundwork Construction Co.

Why Farmers Branch Chooses Groundwork Construction Co. of Dallas

We set the standard for iron fence in Farmers Branch.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Farmers Branch

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Farmers Branch Customers Say

Trusted by homeowners across Farmers Branch and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Iron Fence in Farmers Branch?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Farmers Branch.

(844) 797-4808

Request a Free Estimate in Farmers Branch

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch