Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Addison, TX: What the Job Actually Involves
An iron fence in Addison, TX typically runs $3,500 to $9,000 installed, depending on linear footage, height, and whether you choose ornamental steel or wrought iron, and most residential runs are done in two to four days once materials arrive. If you’re fencing a commercial patio or a small lot along Belt Line Road, expect closer to the top of that range because of anchoring and traffic-protection details. Call (844) 797-4808 for a free on-site estimate.
How We Build an Iron Fence, Step by Step
Here’s the actual sequence, so you know what happens and when you have to make decisions.
Stage 1: Site walk and layout (day 1, roughly 1 – 2 hours). We mark the fence line with you, confirm the property boundary against your survey, and check what’s underground before anyone digs. In Addison this matters. A fence line crossing a shared utility easement or a parking-lot drain line needs to be pinned down now, not after post holes are dug. You decide the final line, the gate locations, and the height at this stage.
Stage 2: Demo and prep (day 1, rest of the day). If there’s an existing fence, we pull it, haul it off, and clear the footing line. Old concrete footings get broken out and removed. On tight commercial lots along Addison Road, we also set up a walkway and traffic plan so customers and delivery vehicles keep moving while we work.
Stage 3: Post setting (day 1 – 2). Iron fence posts get set in concrete and need to cure before anything hangs on them. We set posts on 6-to-8-foot centers, deeper and wider on gate posts, and check plumb. This is the stage you don’t want rushed; a leaning gate post is almost impossible to fix later without cutting concrete.
Stage 4: Panel and gate install (day 2 – 3). Panels are leveled, aligned, and fastened. Gates get hinged and fitted with latches. You choose hardware finish and whether you want a self-closing hinge or a lock at the walk-through.
Stage 5: Finish, punch list, and final walk (day 3 – 4). Touch-up paint on any scuffed posts, final alignment, and a walkthrough with you. Every project is covered by the 730-Day Done Right Promise, so if a post settles or a gate starts dragging, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Iron is a category, not a single product. These are the real forks in the road.
- Wrought iron vs. ornamental steel vs. aluminum. True wrought iron is the heaviest, moves least over time, and costs the most. Ornamental steel sits in the middle: strong, widely available, and the right call for most Addison commercial frontage. Aluminum looks similar but is lighter and won’t rust, which suits some residential lots but doesn’t hold up to the same impact where vehicles or crowds are close.
- Height. 4-foot decorative runs read as landscaping; 6-foot is the standard privacy-and-security height. Anything taller needs a conversation about wind load and anchoring.
- Finish. Powder coat gives a clean, uniform look and holds up to North Texas sun and hail cycles better than field-painted finishes. This is the one place a poor choice shows up fast: cheap paint on iron fades and chalks within a couple of summers.
- Post anchoring. Surface-mounted posts anchor to existing concrete; core-drilled or embedded posts go into new footings. Existing-slab anchoring costs less but depends on the slab being sound.
- Gates and hardware. Walk gates, drive gates, and gate automation each add cost and each change the anchoring plan.
What Iron Fence Costs in Addison, TX
The lead range for this job in Addison is $3,500 to $9,000. Here’s what moves a project from the low end to the high end:
| Factor | What it does to price |
|---|---|
| Linear footage | Every extra 10 feet of 6-foot ornamental steel adds roughly $600 – $1,000 in materials and labor |
| Existing fence removal | Removing and hauling an old fence, plus breaking out buried footings, adds several hundred to over a thousand dollars depending on length |
| Material grade | Ornamental steel sits in the middle; true wrought iron and heavy-gauge panels push toward the top of the range |
| Anchoring | Surface-mount on sound concrete is cheapest; new footings, core-drilling, or base plates on a compromised slab add cost |
| Gates | Each gate is its own line item; a wide vehicle gate with automation is the biggest single add |
A written estimate breaks out linear footage, height, material grade, gate hardware, finish, and removal. What typically isn’t included unless it’s listed: underground utility locating, engineering for oversized gates, and any landscape repairs after the fence line goes in. You get upfront pricing: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Addison Properties Specifically Do to This Job
Addison is close to fully built out (ZIP 75001), so a new iron fence here almost always means working around something that’s already there. That’s less a fencing job and more a site-planning job. Most of our calls come from restaurant and bar patios, apartment community perimeters, and office frontage rather than traditional single-family lots, and that changes the work.
Tight, shared-parking sites along Belt Line Road and Addison Road mean staging space is scarce. We plan where materials land and where customers walk before we bring a single post. Permits go through the Town of Addison building department, and fence work on commercial or multifamily property usually needs to clear the same review that tenant finish-out does, so we submit drawings early rather than assume a residential-style permit will slide through. For commercial properties with patios, there are sometimes grease-interceptor and hood considerations tied to the broader site plan, which is why a fence project sometimes touches permits that a neighboring suburb never bothers with. If your iron fence is part of a wider property upgrade, it fits naturally with our Fence Installation service, and homeowners and property managers often pair it with Patios, Walkways & Pool Decks in Addison when the outdoor area is being reworked in one pass.
Then there’s the weather. North Texas heat, spring hail, and occasional ice cycles mean exterior work is scheduled around storm season, and powder coat is worth the money here because field paint fails under that much sun. The housing stock is dominated by 1970s – 1980s office, apartment, and entertainment-cluster buildings, so existing slabs and curbs are often older and need anchoring that respects their condition. If your project grows into something bigger, our Fence Installation in Addison page covers the full scope. And if you’re dividing a lot for a new structure, ADU Design & Permitting in Addison is the companion job. We serve the whole of Addison and the surrounding area.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Iron Fence in Addison
A typical residential iron fence takes two to four days from demo to final walk, and larger commercial perimeter runs can stretch to a week or more. Post curing is the main variable; the concrete has to set before panels go up, so rush jobs aren’t really rush jobs.
Commercial and multifamily fence work in Addison almost always needs a permit through the Town of Addison building department, and residential replacement sometimes does depending on height and location. We handle the submittal and inspection for you. Call (844) 797-4808 and we’ll confirm what your specific property needs.
Often, yes. Surface-mounted posts anchor to existing concrete and avoid digging entirely, which works well on patios and commercial slabs. Where the slab is too old or too thin, we’ll recommend core-drilled footings instead and explain exactly why. The call is based on the slab, not on convenience.
Most iron fence projects in Addison land between $3,500 and $9,000 installed, with commercial perimeter work and automated gates pushing higher. Footage, material grade, anchoring, and removal are the four things that move the number. Call (844) 797-4808 for an exact quote; estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise. If a post settles, a gate drags, or an alignment issue shows up, we come back and make it right. That’s the whole point of a written guarantee.
Get a Free Iron Fence Estimate in Addison
We’ll walk the property with you, measure the actual footage, check the slab and anchoring, and hand you a written line-item estimate before any work starts. Upfront pricing, no surprises, and a live person answers the phone 24/7. Call Groundwork Construction Co. at (844) 797-4808 to schedule your free on-site estimate for iron fence work in Addison.
Written by the team at Groundwork Construction Co.