Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Addison, TX: What to Expect
Metal roofing in Addison, TX typically runs $15,000 to $40,000 installed, and most residential panels are finished in two to four days once materials land on site. For the property types that dominate ZIP 75001 (restaurants, apartment communities, 1970s – 80s office buildings), the planning takes longer than the install, because panels, curbs, and roof penetrations all have to clear a Town of Addison building permit and get worked into shared-parking logistics. Call (844) 797-4808 for a free on-site estimate.
How our metal roofing process runs in Addison, from tear-off to final inspection
Commercial and multifamily roofs don’t forgive a loose schedule. Here’s the sequence we follow, and where you make the call.
Days 1 – 2: site walk and permit package. We measure pitch, decking condition, and every rooftop unit, hood, and vent that has to be flashed. You approve the panel profile and color. We submit the permit package to the Town of Addison building department. This is also when we agree on staging: where material gets dropped, and when crews can work around tenant hours, delivery windows, and parking.
Day 3: tear-off and deck inspection. Existing roofing comes off to the deck. We inspect substrate, sheathing, and flashing transitions, and photograph anything that changes scope. You get that in writing before we go further.
Days 3 – 4: underlayment and edge metal. High-temp underlayment goes down, then drip edge, eave trim, and any custom flashing. These details carry the water, so they get the most careful inspection of the whole install.
Days 4 – 5: panel installation. Panels go on panel by panel, anchored per the profile’s engineering, with all penetrations flashed and sealed. On larger Addison roofs the crew splits into two runs so a single building face is never left open overnight.
Final walk and inspection. We clean the site, run a water test on problem transitions, and walk the finished roof with you. Then comes the Town of Addison inspection and your closeout paperwork.
A residential re-roof in Addison moves faster, but the sequence doesn’t change.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The metal roofing options you’ll choose between
Most of the decisions happen in one sitting. Here’s what actually changes the price and the outcome.
- Standing seam vs. exposed fastener. Standing seam hides the fasteners and holds up best to hail and heat; it’s the premium pick. Exposed-fastener panels cost less but rely on washers and screws that can back out over time.
- Panel material. Galvalume steel is the value standard for North Texas. Aluminum resists corrosion better near pool areas and commercial kitchens; copper costs far more but ages to a patina some owners want.
- Finish and warranty grade. Painted finishes (Kynar-based) hold color through 100°F-plus summers. Cheaper finishes chalk. Ask what the finish warranty actually covers.
- Panel profile and color. Ribbed profiles, color-matched trim, and matching fascia. On Addison restaurant and retail roofs, color can’t clash with a landlord’s signage palette.
- Insulation and underlayment. A thermal break or higher-grade underlayment helps on buildings where the roof sits over conditioned space.
Where windows are part of the same envelope upgrade, homeowners often pair this with Window Replacement in Addison to lock in the full shell at once.
What metal roofing costs in Addison, TX
Installed metal roofing in Addison lands between $15,000 and $40,000 for most projects. The low end is a straightforward residential or small commercial re-roof in standard steel. The high end is a larger building, a premium profile, or complex flashing and penetrations.
- Roof size and pitch: square footage drives material and labor; steep or cut-up roofs cost more.
- Existing condition: bad decking, rot, or multiple old layers add tear-off and substrate cost.
- Penetrations and flashing: rooftop units, hoods, and skylights each need custom work.
- Material grade: steel up to aluminum and copper, and painted vs. mill finish.
- Permit and access: Town of Addison permit scope and cramped parking on Belt Line sites add staging and coordination.
Your written estimate is line-item: tear-off, decking, underlayment, panels, flashing, trim, labor, and permit. It’s fixed pricing, no surprises, and work is covered by our 730-Day Done Right Promise. In most cases what’s not included are structural repairs found under the deck, or HVAC work to reset roof-mounted units.
See the difference
Before
After
Before
After
Before
AfterWhat Addison rooftops specifically ask of a metal roof
Addison is an almost entirely built-out commercial and multifamily enclave, so the metal roofing work here is rarely a ground-up build. It’s a restaurant, bar, or apartment community re-roofing a 1970s – 80s structure that’s been patched for decades. That means the real work is in planning: staging material around shared parking along Belt Line and Addison Road, coordinating crew hours around tenant and late-night noise rules, and scheduling around North Texas storm season and 100°F-plus summers. The failures we find most often on Addison roofs are ponding at low-slope transitions and flashing that let go after a hail cycle. If the metal roof is part of a wider scope, it fits under our broader Roofing in Addison service. Our Roofing team handles all of Addison. Where the same building needs window upgrades, homeowners and property managers often pair this with Impact Windows & Doors in Addison.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – metal roofing in Addison
Most Addison metal roofing projects are finished in two to five days once the permit clears, with larger commercial buildings stretching longer. Call (844) 797-4808 for a timeline for your building.
Yes. Metal roofing in Addison is permitted through the Town of Addison building department, and the final inspection is part of the job. We pull the permit.
Expect $15,000 to $40,000 installed for most projects, with the range driven by size, deck condition, penetrations, and material grade. Call (844) 797-4808 for an exact quote, which is free.
Usually not on commercial or older roofs, and it isn’t what we recommend. Tearing off lets us inspect the deck and flashing, which is where most failures start. Call (844) 797-4808 and we’ll walk your roof.
Every project is covered by our 730-Day Done Right Promise on workmanship, backed by the panel manufacturer’s finish warranty. Call (844) 797-4808 for the details in writing.
Get a free metal roofing estimate in Addison
Call (844) 797-4808 for a free on-site estimate on your metal roofing project in Addison. A live person answers, a crew walks the roof and photographs the deck condition, and you get a line-item quote. If the scope works for you, you get the 730-Day Done Right Promise on the work. Tests are free.
Written by the team at Groundwork Construction Co. of Dallas.