A Groundwork company - serving Dallas, TX
Small & Partial Kitchen Remodels in Irving, TX | Groundwork Construction Co. of Dallas

Small & Partial Kitchen Remodels in Irving - Fixed Price, Set Finish Date

Free in-home design consult and a written, line-item quote before demo starts. The price we sign is the price you pay, with a finish date in the contract. Licensed, insured, permits handled.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Small & Partial Kitchen Remodels in Irving, TX: What They Cost and How Long They Take

Small & partial kitchen remodels in Irving, TX typically run $14,000 to $45,000 and take three to six weeks of on-site work depending on how much gets moved. That range covers a focused update: new cabinets, countertops, a backsplash, lighting, and floor patching on a typical South Irving ranch kitchen of 100 to 150 square feet. If you’re keeping the footprint and reusing the plumbing and electrical locations, you’ll land near the bottom of that band. Call (844) 797-4808 and we’ll put an exact number on your kitchen rather than a ballpark.

Call (844) 797-4808

The Five-Stage Sequence We Follow on a Partial Kitchen in Irving

Most contractors skip straight to demo. We don’t. Here’s the actual order of events, with the decisions you’ll need to make at each stage.

Stage 1: Site visit and measurements (day 1, two to three hours)

We measure every wall, locate the shutoffs, and confirm what’s behind the drywall where we can. This is where you decide your cabinet layout and whether the sink or range moves. Moving either one changes everything downstream, so we settle it here. You leave with a written scope and a fixed number.

Stage 2: Ordering and lead-time window (days 2 to 21)

Cabinets drive the calendar on almost every Irving kitchen we touch. Stock boxes arrive in seven to ten days; built lines like KraftMaid and semi-custom runs take three to five weeks. You pick door style, finish, and box construction here. We schedule demo to start the day materials land, not before.

Stage 3: Demo and rough-in (days 1 to 3 of construction)

We pull the old counters, cabinets, and backsplash and protect the flooring you’re keeping. If you’re shifting a circuit for a new range hood or adding outlets, the electrician roughs that in now. Older homes in the 75060 and 75061 ZIP codes sometimes hide aluminum wiring or galvanized supply lines, and we flag those the day we open the wall, not after cabinets are hung.

Stage 4: Cabinet set, counter template, and install (days 4 to 12)

Cabinets go in first, level and shimmed to the wall. Then the countertop fabricator templates the actual installed boxes, which takes five to seven business days for Cambria or granite. We set appliances, tie in the sink and disposal, and run the new lighting.

Stage 5: Backsplash, paint, and punch list (days 13 to 18)

Tile goes up last so the cuts land clean against the counter. Then paint, caulk, and a walkthrough where you sign off line by line. Most partial kitchens finish inside three weeks of construction time once materials are on site.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between, and What Each One Costs You

A partial kitchen is a series of trade-offs, and the honest version of each matters more than a brochure.

  • Cabinet boxes: Plywood boxes hold up to moisture and last far longer than particleboard, and they cost meaningfully more. In a kitchen you’ll keep for a decade, plywood is the right call. If you’re selling in two years, stock particleboard with a good face frame is defensible.
  • Countertops: Cambria or granite runs $2,000 to $6,500 installed and holds up to heat and knife slips. Laminate is a fraction of that and looks it within five years. Quartz wins on low maintenance; granite wins on price for the same visual weight.
  • Backsplash: $800 to $2,500. Ceramic subway tile is forgiving and cheap to install. Full-slab or large-format porcelain looks dramatic but the cuts and setting costs climb fast.
  • Doors and hardware: Refacing keeps your existing boxes and swaps doors and fronts. It’s the cheapest path to a new look, and it only makes sense if the boxes are solid and square.
  • Layout vs. footprint: Keeping the sink and range where they are saves $2,000 to $6,000 in plumbing and electrical work. Moving them opens better flow but drags rough-in, permits, and inspection into the job.
  • Flooring: Patching under new cabinets is normal. Replacing the whole floor is a separate line item. Luxury vinyl plank handles North Texas humidity swings better than solid hardwood at a lower price.

What Small & Partial Kitchen Remodels Cost in Irving, TX

The lead range for this work in Irving is $14,000 to $45,000, and here’s what pushes a job toward each end.

Line item Typical range
Small kitchen remodel (full scope, compact footprint) $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

Five variables move the number most. Size is the obvious one: a 90-square-foot galley and a 180-square-foot kitchen are different jobs. Existing condition matters more than buyers expect. A 1960s South Irving home may need subfloor repair or a new supply line once the wall is open. Relocating plumbing or electrical adds real cost, because it means rough-in, inspection, and drywall repair. Material grade is where you control the spend: stock cabinets and laminate counters versus KraftMaid boxes and Cambria tops can swing the total by $12,000 or more. Permit scope follows from the first four. A cosmetic swap may not need one; anything touching structure, gas, or new circuits does.

Every written estimate from us is line-item and fixed. The number you see is the number you pay, and it doesn’t move because a wall turned out to be stubborn. What it does not include: structural repair discovered behind the wall, appliance purchases, and any work outside the kitchen. We price those separately only if you ask for them.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irving Homes Specifically Do to This Job

Irving splits into two very different construction realities, and the kitchen in front of you depends on which side of the SH-114 corridor it sits on. South and central Irving, in the 75060 and 75061 ZIP codes, is 1950s to 1970s brick-veneer ranch country. Those kitchens started small and were sometimes expanded by previous owners without a permit. On more than a few remodels we’ve pulled a wall down to find framing that doesn’t match the original plans. That’s a permitting and engineering problem, and it changes the schedule, not just the budget.

North Texas black-clay soil is the other local factor. It swells and shrinks with the wet-dry cycle, and in older South Irving homes that movement shows up as out-of-level floors and cracked slab. If your kitchen floor dips near the exterior wall, we check the foundation before we hang cabinets, because cabinets set on a moving slab will pull away from the wall within a couple of seasons. We also schedule anything dusty or heat-sensitive for early morning, since summer afternoons here push past 100 degrees and most crews are off the site by early afternoon.

On the Las Colinas and Valley Ranch side (75038, 75039), the housing stock is newer but many of those homes sit under HOA rules that govern exterior work, dumpster placement, and sometimes even the color of a visible vent hood. We ask about HOA approval before demo day, not after. If you’re covering Irving, we’re honest about which parts of the job are ours and which belong to a permit office. Call (844) 797-4808 to talk through your specific address.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Small & Partial Kitchen Remodels in Irving

Get a Written Estimate for Your Irving Kitchen

If your kitchen needs a focused update rather than a full tear-out, we’ll come to your Irving address, measure the actual space, and hand you a line-item estimate with a fixed number. No pressure to widen the scope. The 730-Day Done Right Promise backs every job, and pricing is upfront with no change orders. Call (844) 797-4808 to schedule your free estimate. A live person answers, day or night.

Written by the team at Groundwork Construction Co.

Why Irving Chooses Groundwork Construction Co. of Dallas

We set the standard for small & partial kitchen remodels in Irving.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your small & partial kitchen remodels project started is simple.

1

Call or Request a Free Estimate

Tell us about your small & partial kitchen remodels project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local small & partial kitchen remodels pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Small & Partial Kitchen Remodels in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irving.

(844) 797-4808

Request a Free Estimate in Irving

Tell us about your small & partial kitchen remodels needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch