Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Irving, TX: What It Costs and How Long It Takes
Door installation in Irving, TX runs $350 to $1,200 per interior door and $900 to $3,500 for a quality exterior entry door, with most single-door jobs finished in one day and full main-floor replacements (6 to 9 doors) taking 2 to 4 days. Prices include removal, shimming, hardware and paint-ready finishing. Call (844) 797-4808 for a free on-site estimate on your door installation. Irving homes built from the 1950s through the 2000s each bring their own surprises, so no honest number exists without a look at your walls first.
How a Door Installation Actually Unfolds
Door installation is a framing job dressed up as a finish job. Here is the real sequence we run, and where you make decisions along the way.
- Day 1, morning – measure and open the wall. We check rough openings, jamb square, header height and floor level. In older South Irving ranches, that usually surfaces a settled slab or a bowed king stud, which is why we measure before we order anything. You decide nothing yet; we document what we find.
- Day 1, afternoon – demo and prep. The old slab or prehung unit comes out, the opening gets cleaned to bare framing, and we check for rot in the sill plate and header. Rot repair is the one thing that turns a one-day job into a two-day job, and we show you the wood before we touch it.
- Day 2 – set and shim. The new frame goes in plumb and level, shimmed at hinge points and locked with structural screws, not nails. You confirm swing direction and hinge side here, so be ready with that decision before we start.
- Day 2 or 3 – insulation, seal and hardware. Foam and batt go into the cavity around the frame, exterior doors get flashing and a threshold seal, and the lockset, deadbolt and closer get installed. This is where weather tightness is won or lost.
- Final day – trim, paint-ready finish and walkthrough. Casing goes on, gaps get filled, and we open and close every door with you to check the latch, the swing and the reveal. Permits, if needed, get closed out after the inspection passes.
For a full-project scope, this is often part of a larger job – if you’re replacing doors alongside windows, look at Windows & Doors in Irving for how the two trades overlap in one rough-in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most homeowners spend more time than they expect on this list. It’s the right list to linger over.
- Slab vs. prehung. A slab is just the door leaf and costs less but requires mortising for hinges and locks at the site. A prehung unit comes framed and hung and installs faster. We recommend prehung for most Irving replacements because the upcharge is small and the fit is cleaner.
- Solid core vs. hollow core. Hollow core saves money on interior doors (down to the low end of the $350 range) but transmits sound badly. Solid core adds weight and quiet, and it’s the upgrade most homeowners say they’d repeat.
- Exterior material. Fiberglass holds paint, resists the North Texas sun and won’t warp; steel is the budget pick and dents; wood is beautiful and needs refinishing every few years in our heat. Fiberglass is what we spec most often for Irving entries.
- Hardware grade. Builder-grade knobs and hinges fail first. A solid brass or quality stainless lockset and ball-bearing hinges cost more up front and last far longer.
- Insulation and weatherstripping. An insulated exterior door core and a proper threshold seal cut summer heat gain noticeably. This is one of the cheapest upgrades on the list.
Our wider Windows & Doors service covers the full envelope if you’re doing more than doors.
What Door Installation Costs in Irving, TX
Here is the line-item range we quote in Irving, kept consistent with the rest of our pricing so you can compare apples to apples.
| Item | Typical Range |
|---|---|
| Interior door, single (slab or prehung) | $350 – $1,200 |
| Exterior entry door, installed | $900 – $3,500 |
| Full main-floor replacement (6-9 doors) | $3,000 – $9,000 |
| Rot repair or framing correction | $250 – $1,200 |
| Hardware upgrade (lockset, hinges) | $150 – $600 |
What pushes a job toward the high end: exterior doors with sidelites or transoms, a rough opening that’s out of square, rot in the sill or header, upgraded hardware, and permit scope. What keeps it low: interior slabs, standard sizes, no framing repair, and a clean opening. Our written estimate spells out labor, materials and any contingencies before we start, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is two construction markets stitched together, and that split shows up in every door we install. South and central Irving (75062, 75060) is 1950s-1970s brick-veneer ranch country, and those postwar openings are rarely square. We see settled thresholds, out-of-plumb jambs and door frames that have taken decades of black-clay soil movement, so a “simple” door swap often needs framing correction before the new unit goes in. Las Colinas, Valley Ranch and the 75063 corridor tell a different story: 1980s-2000s subdivision homes with tighter openings, but builder-grade doors and hardware that are hitting the end of their useful life right on schedule. We work the whole city, from the old downtown blocks to the DFW edge, and you can see our full Irving coverage here. On the newer side, homeowners often pair door replacement with Vinyl Fence in Irving when they’re refreshing the whole exterior at once.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Irving
A single interior door takes about half a day; a single exterior door takes a full day once flashing and finishing are counted. A full main-floor replacement of 6 to 9 doors runs 2 to 4 days. Call (844) 797-4808 for an exact timeline on your home.
Interior door swaps generally don’t need a permit; exterior door replacements often do because the opening affects the building envelope and, on older homes, the structure. We check the permit requirement for your specific address before we schedule, and we pull what’s required and pass inspection.
Yes, in the vast majority of cases – a like-for-like door replacement leaves plumbing and framing untouched. The exception is widening an opening or converting a closet into a passage, which is a framing and potential structural job we’ll flag on the estimate.
Interior doors run $350 to $1,200 each and exterior entries $900 to $3,500, with full main-floor replacements at $3,000 to $9,000. Framing repair, upgraded hardware and exterior sidelites push the number up. Call (844) 797-4808 for a free, written line-item quote.
Every door we install is covered by the 730-Day Done Right Promise – if it’s not right, we make it right. Materials also carry manufacturer warranties on top of that, and we walk through both with you at the final inspection.
Get a Free Door Installation Estimate in Irving
Call (844) 797-4808 to schedule a free on-site estimate for door installation in Irving. We’ll measure your openings, walk you through material and hardware options, and hand you a written line-item price with no surprises. Live person answers around the clock. If a fence is next on your list too, we also handle Chain Link Fence in Irving and can quote both in one visit. Estimates are free and there’s no pressure.
Written by the team at Groundwork Construction Co. of Dallas.