A Groundwork company - serving Dallas, TX
Chain Link Fence in Irving, TX | Groundwork Construction Co. of Dallas

Chain Link Fence in Irving - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Chain link fence installation in Irving, TX typically runs $3,500 to $9,000 for a residential lot, with most standard 4-foot or 6-foot runs landing in the middle of that band. A 150-foot perimeter with two gates and new posts is usually a two-day job. For an exact number on your property, call (844) 797-4808 and we’ll set a free on-site estimate.

Chain Link Fence in Irving: What the Job Actually Involves

Here’s the honest picture. A chain link fence breaks down into four things: posts set in concrete, a top rail, tensioned fabric, and gates. The work is fast compared to most fencing because the material is light and the install is mechanical, not finish work. What separates a fence that lasts 20 years from one that leans in three comes down to three things: post depth, concrete, and how tightly the fabric is stretched.

Call (844) 797-4808

Irving sits on North Texas black clay, and that soil is the whole ballgame. Clay swells when it’s wet and shrinks when it dries, which is why you’ll see fence lines in the neighborhoods off Story Road leaning and wobbling after a dry summer. Posts set shallow in a 6-inch hole don’t hold. We set them deeper and use bagged concrete, Quikrete or Sakrete depending on what’s on hand, because that’s the difference between a fence and a fence that stays put.

Timeline is simple. Day one is layout, digging, and setting posts in concrete. The concrete cures overnight. Day two is rails, fabric, tension, and gate hang. Most Irving jobs wrap in two working days. Larger properties or rocky dig conditions can push to three.

Key Takeaways:

  • Typical Irving chain link fence cost: $3,500 – $9,000
  • Standard install window: 2-3 days on-site
  • Post depth and concrete quality drive longevity more than fabric brand
  • Black-clay soil means post holes need to go deeper than in sandy or loam ground

How We Build a Chain Link Fence: The Five Stages

Stage 1: Site walk and layout. We walk the property line with you, confirm corners, and mark post locations. This is where you decide gate placement and whether you want a walk gate, a drive gate, or both. That decision affects everything downstream, so it happens first. About 30 minutes.

Stage 2: Utility locate and hole digging. Before a shovel hits dirt, we confirm utility locates are clear. In older Irving neighborhoods, gas and water lines can run close to property edges, and hitting one is a bad day for everyone. Once cleared, we dig post holes to depth. Clay is dense work, and this stage often takes the bulk of day one on a 150-foot run.

Stage 3: Setting posts in concrete. Posts go in, concrete goes around them, and we check plumb and height as we go. This is the stage that determines whether your fence stands straight in year ten. The concrete needs to cure before anything gets hung, so we stop here and come back the next morning. You’ll see the posts sitting overnight.

Stage 4: Rails, fabric, and tension. Top rail, tension wire, and fabric get pulled and stretched tight. The tension bar at each end and at every gate post is what keeps the mesh from sagging. We walk the whole run with you before moving to gates so you can see the tension and make sure the height and layout are right.

Stage 5: Gate hang and final walkthrough. Gates get hung, latched, and swing-tested. This is where we confirm clearance, check the latch alignment, and adjust hinges if needed. You walk the fence with us, and anything that needs a tweak gets handled before we leave.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between on a Chain Link Fence

The choices on a chain link job are fewer than on wood or vinyl, but each one moves the price and the lifespan. Here’s what you’re actually deciding:

  • Height: 4-foot vs. 6-foot. Four-foot is cheaper and fine for marking property lines. Six-foot is the standard for pet containment and any real privacy or security purpose. The jump adds roughly 15-20% to the material cost.
  • Gauge of wire. Chain link fabric comes in 11.5-gauge (standard residential) and heavier gauges for commercial. For a home fence, 11.5-gauge is the right call. Thicker wire costs more and doesn’t add meaningful life on a residential lot.
  • Vinyl-coated vs. galvanized. Galvanized is the budget choice and holds up fine. Vinyl-coated in black or green looks cleaner against landscaping and hides the industrial look. It adds roughly 10-15% to material cost and extends the life of the wire.
  • Post and rail weight. Standard weight posts are fine for most homes. Heavier posts matter on long runs or if you’re planning to attach anything to the fence later.
  • Gate type. A walk gate is simple and cheap. A drive gate for vehicle access doubles or more the gate cost and needs heavier posts to carry the weight over time.

If you’re adding a chain link run as part of a full Fence Installation in Irving project that mixes materials, we’ll spec the posts and gates to match the whole perimeter so you’re not mixing hardware. For properties where the fence ties into grading or drainage work, homeowners often pair this with Concrete Driveways & Concrete Work in Irving to handle the apron and gate approach at the same time.

What a Chain Link Fence Costs in Irving, TX

For a typical residential lot in Irving, a chain link fence lands between $3,500 and $9,000. Here’s how that range breaks down so you can see where your property sits:

Scope Typical Range
Standard 4-ft perimeter, ~100-150 ft, one gate $3,500 – $5,500
6-ft perimeter, ~150 ft, walk gate plus drive gate $5,500 – $7,500
Large lot, vinyl-coated, multiple gates $7,500 – $9,000
Gate additions after the fact Quoted separately

Four variables push a job toward the high end. Linear footage is the biggest. Gate count and type is second, since each gate needs heavier posts and hardware. Dig conditions matter in Irving specifically, because black clay is harder to dig than sandy ground and can add labor time. Material grade, meaning galvanized vs. vinyl-coated and standard vs. heavier gauge, moves the number modestly. And if the property line runs into an existing concrete pad or retaining wall, that’s demo and disposal work that gets added.

A written estimate from us lists posts, rails, fabric, tension wire, gate hardware, concrete, and labor line by line. What it won’t include unless we scope it: removing an existing fence, hauling off old material, or repairing a property-line issue. We’ll tell you upfront if any of that applies so there are no surprises mid-job. Our Fence Installation service covers the full scope if your project grows beyond chain link.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irving Homes Specifically Do to This Job

If you’re in South or central Irving, around the old downtown, the Hospital District, or the blocks off Belt Line and Story, you’re probably fencing a 1950s-to-1970s lot. That matters for chain link because those older properties often have property lines that don’t run perfectly square, buried landscape edging, or old fence posts still in the ground that need pulling. Every one of those things adds a step.

The other half of Irving, out toward Las Colinas, Valley Ranch, and the 75063 corridor, is a different job. Subdivision lots from the 1980s through the 2000s are more likely to have a clean line, a prior HOA-approved fence footprint, and possibly an existing fence that just needs replacing rather than a fresh install. If you’re in one of those HOAs, confirm the fence height and color with your association before we order material. Most Irving HOAs that touch fencing will specify height and finish; the install itself is the same, but the approval needs to be in hand before day one.

The clay is the constant. Whether you’re in 75062 or 75063, post depth and concrete are what keep the fence straight through the wet-dry cycle. We handle jobs across Irving and neighboring Farmers Branch, Coppell, Euless, and University Park, and the soil conditions are similar throughout. If your gate approach abuts a driveway that needs resurfacing or replacement, homeowners often pair this with Asphalt Driveways & Resurfacing in Irving so the fence and the drive get finished in the same window.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About a Chain Link Fence in Irving

Get a Chain Link Fence Estimate in Irving

If you’re ready to price a chain link fence on your property, call (844) 797-4808 and we’ll schedule a free on-site estimate. We’ll walk the line with you, check utility locates, confirm gate placement, and hand you a written line-item quote before you commit to anything. Pricing is upfront, financing is available at 0% for 18 months, and our technicians are background-checked and arrive in uniform. One call gets you a real number for your property.

Written by the team at Groundwork Construction Co.

Why Irving Chooses Groundwork Construction Co. of Dallas

We set the standard for chain link fence in Irving.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your chain link fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your chain link fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chain link fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Chain Link Fence in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irving.

(844) 797-4808

Request a Free Estimate in Irving

Tell us about your chain link fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch