Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Window Replacement in Irving, TX Actually Involves
Window replacement in Irving, TX runs $4,500 – $15,000 for a typical whole-home job, and most houses take one to three days on site once the units arrive. You’ll get a written, line-item estimate before anything is ordered, and you’ll know your exact scope before we touch a single frame. Call (844) 797-4808 and we’ll set up a free on-site measurement and quote. No pressure, no vague ballpark.
How a Window Replacement Job Moves From Measure to Final Walkthrough
We don’t hand you a date and disappear. Here’s the actual sequence, stage by stage, so you know what to expect on your property.
Stage 1: Measure and order (day 1, about 90 minutes)
A technician measures every opening, checks the frame condition and confirms what’s behind the trim. This is where you decide unit style, glass package and interior finish. Lead time on custom-sized units runs roughly four to eight weeks depending on brand and configuration. You’ll get a firm order confirmation with the exact ship window.
Stage 2: Site prep and protection (morning of install)
We lay drop cloths, move furniture back from the walls and tape off finished surfaces. The crew confirms the delivery against the order sheet before cutting anything. If a unit arrived wrong, we find out now, not after your wall is open.
Stage 3: Removal and framing check
Old sashes and frames come out. We inspect the rough opening, check for rot or water damage, and confirm the framing is plumb and square. On older Irving homes this is where surprises surface: a soft sill, a shifted header, rotted sheathing. We photograph anything we find and show you before the price of that repair is added.
Stage 4: Installation and sealing
New units go in, get shimmed level, fastened and flashed. Low-expansion foam, backer rod and a proper sealant bead finish the perimeter. This is the step that decides whether a window performs for twenty years or leaks in year two. Flashing and sealant matter more than the window itself.
Stage 5: Trim, cleanup and final walkthrough
Interior trim is reinstalled or replaced, exterior caulk is finished, and we clean up every scrap. You walk the job with us window by window, operate each unit and sign off. Any punch-list items get scheduled before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Window replacement gives you more decisions than most homeowners expect. Here’s the honest breakdown of what each one costs you in money and performance.
- Frame material. Vinyl is the workhorse: affordable, low-maintenance and a good fit for most Irving homes. Fiberglass holds up better in extreme heat and costs more. Wood looks best and demands repainting. Aluminum is thin and transfers heat, which matters in a Texas summer.
- Glass package. Double-pane with a low-E coating and argon fill is the standard choice for North Texas. Triple-pane gains you marginal efficiency for a real price jump. Consider a solar-control coating on west-facing windows.
- Unit style. Single-hung, double-hung, casement and fixed. Casements seal tighter; single-hungs are simpler and cheaper to service. Match the style to the room and the existing architecture.
- Full-frame vs. pocket replacement. Pocket replacement drops a new unit into the existing frame. It’s faster and cheaper but doesn’t fix a rotting frame. Full-frame replacement removes everything down to the rough opening and is the right call on aging homes.
- Brand and warranty. We work with manufacturers like Andersen and Marvin for their build quality and warranty backing. A solid unit warranty plus our 730-Day Done Right Promise covers both the product and the install.
What Window Replacement Costs in Irving, TX
Whole-home window replacement in Irving runs $4,500 – $15,000. That’s the number you’ll see on your estimate, and it’s the number you pay. Here’s what pushes a job toward either end of that range.
| Factor | Low end | High end |
|---|---|---|
| Number of windows | 8 – 12 units | 20+ units |
| Frame material | Vinyl | Fiberglass, wood |
| Glass package | Double-pane, standard | Triple-pane, solar-control |
| Install type | Pocket replacement | Full-frame with rot repair |
| Unit style | Fixed, single-hung | Casement, custom sizes |
Five variables drive the price: how many windows you replace, existing frame condition, material and glass grade, whether you’re doing a pocket or full-frame install, and how much structural or trim work the job needs. A written estimate spells out unit cost, labor, disposal, trim and sealant line by line. It typically excludes any hidden rot or framing repair found during removal, which we quote and get your approval on before proceeding. Upfront pricing means you see the full number before work starts.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is essentially two construction markets stitched together, and that split changes how a window job gets run. In the mid-century core around old downtown and the Hospital District (75060, 75061, 75062), you’ll find 1950s – 1970s brick-veneer ranches with original single-pane wood or early aluminum windows that have long outlived their seals. These units show up with fogged glass, rotted sills and failing weatherstripping. On those lots, the original framing is often out of square and the shallow footings mean a full-frame install sometimes uncovers a soft header. Out in the Las Colinas, Valley Ranch and 75063 corridor, the housing stock runs to 1980s – 2000s subdivision product, where a standard pocket replacement usually does the job cleanly. The black-clay soils that define North Texas shape how we approach older foundations here too. Irving falls under the metro’s standard permitting and inspection flow, and we pull the permits and manage the inspection so your job is code-compliant and documented. You’ll see this same intentional approach across our Windows & Doors work.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Replacement in Irving
Most jobs are one to three days on site once units arrive. Custom-sized units need four to eight weeks of lead time before install. Call (844) 797-4808 for a firm timeline based on your home.
Full-frame replacement and any change to the opening size typically require a permit and inspection. Pocket replacement into an existing frame often doesn’t. We confirm the requirement for your specific address and handle the paperwork.
Not for the listed scope. The only time the number moves is if removal reveals hidden rot or framing damage, which we photograph, quote and get your approval on before doing the repair. No surprise line items after the fact.
Most Irving homes land between $4,500 and $15,000 for a whole-home job, depending on unit count, material, glass package and install type. Call (844) 797-4808 for an exact quote, and estimates are free.
You get the manufacturer’s unit warranty plus our 730-Day Done Right Promise on workmanship. If the install isn’t right, we make it right.
Often yes. If you’re already opening walls for a larger project, folding window replacement into the scope saves rework later. Homeowners often pair this with Vinyl Fence in Irving or Aluminum Fence in Irving for the yard. And if you’re comparing this against a broader scope, look at Windows & Doors in Irving to see how it fits together. Our Irving service area covers the full metro.
Get Your Free Window Replacement Estimate in Irving
We’ll send a technician to measure every opening, talk through material and glass options, and hand you a written, line-item estimate with a firm timeline. It’s free, and it comes with no obligation. Call (844) 797-4808 to schedule your estimate. A live person answers around the clock, so you won’t land in voicemail at 6 p.m. on a Friday.
Written by the team at Groundwork Construction Co.