A Groundwork company - serving Dallas, TX
Aluminum Fence in Irving, TX | Groundwork Construction Co. of Dallas

Aluminum Fence in Irving - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Aluminum Fence in Irving, TX: What It Costs and How Long It Takes

An aluminum fence in Irving, TX typically runs $4,000 to $10,000 for a standard residential lot, and most jobs are finished in two to four working days once the layout is staked. You’re paying for a powder-coated, rust-proof metal panel system set on drilled concrete footings, not wood that has to be stained every few summers. Call (844) 797-4808 and we’ll walk your property line and put real numbers in writing.

Call (844) 797-4808

How We Build an Aluminum Fence in Irving, Start to Finish

Here’s the actual sequence, because most homeowners want to know what happens to their yard and when.

  • Day 1, morning: layout and utility locate. We walk the line with you, mark the corners and gate positions with stakes, and confirm nothing runs where we’re about to drill. In older South Irving lots off the old downtown grid, that usually means calling in the locate before we touch a shovel, since sprinkler lines and old gas stubs sit closer to the surface than owners expect.
  • Day 1, afternoon: demo and prep. If there’s an old fence, it comes out, and we haul the panels and posts away rather than leaving a pile in the alley. Posts get set in concrete in every hole, not on drive stakes, so the fence stays plumb through Irving’s clay soil swings.
  • Day 2: concrete cure and rail assembly. Footings need to set before we load weight on them. While the concrete cures, we cut and rack the panels and prep the gate hardware so the assembly day runs clean.
  • Day 3: panel hang and gate fit. Panels go in, pickets level, gates get hung and adjusted for a smooth close and positive latch. This is where a tight side yard or alley gate shows its true test.
  • Day 4: final walk and cleanup. We walk the line with you, check every post, and clean the site. You sign off against a written scope, not a handshake.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Aluminum Fence Options You’ll Choose Between

The panel style, height, and finish drive most of the cost difference. Here’s what actually matters when you’re picking.

  • Height: 4-foot, 5-foot, or 6-foot. Four-foot reads as decorative and passes most neighborhood rules, while 6-foot is the security height for backyards and pools. Going up a foot adds material and more footing depth, so plan for the jump.
  • Picket style: flat-top, spear-top, or ornamental racked. Flat-top is clean and the cheapest to build. Spear-top adds a security deterrent at the top rail. Racked panels follow a sloped grade without stepped gaps.
  • Finish color and coating. Powder-coat in black, bronze, or architectural white holds its color through Texas sun. A quality powder coat is what stops rust at the welds, so this is one place not to cut corners.
  • Gate hardware: standard latch vs. self-closing and keyed. A self-closing, self-latching gate is the safety standard around pools and is worth the upgrade for a driveway gate.
  • Post anchoring: surface-mount vs. drilled footings. Drilled-in-concrete footings hold through clay movement; surface-mounted base plates are faster and suit a concrete patio edge or a commercial-grade install.

What Aluminum Fence Costs in Irving, TX

Residential aluminum fence installation in Irving lands between $4,000 and $10,000 for a typical lot, and we put the exact line items in a written estimate before any work starts. Here’s what moves the price up or down.

  • Linear feet and gate count. A quarter-acre lot runs toward the low end; a half-acre with two gates pushes toward the top.
  • Site access. A tight alley-load or a gate behind a carport in Las Colinas means hand-carrying panels, which adds labor.
  • Existing fence removal. Tearing out and hauling old material adds a line item; leaving it in place saves it.
  • Grade and terrain. A sloped yard needs racked panels and stepped posts, more cut and fit time.
  • Finish and hardware upgrades. Specialty colors, ornamental pickets, and self-closing gates add to material cost.

Our estimate spells out panel count, footing depth, gate hardware, and cleanup. What’s usually not included unless we quote it: permits, utility-locate fees where a line crosses, and any concrete repair to a driveway or walkway the new line cuts through. We’ll flag each one up front so the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irving Yards Specifically Do to an Aluminum Fence Job

Irving is really two construction markets pulled apart along the SH-114 corridor. In the older core around the Hospital District and South Irving, your 1950s-1970s brick ranch sits on a shallow footing, and the black clay under it swells and shrinks with every wet-dry cycle. That means an aluminum fence here lives and dies by its footings, so we drill deeper and set more concrete per post than a contractor used to sandier ground would. Up in Las Colinas and Valley Ranch, the tighter lots and shared alleys make gate placement and access the real challenge, not the soil. We see this pattern on jobs off Story Road and near the airport corridor all the time: a homeowner wants privacy on a narrow side yard, and the only workable line is right against an existing fence or a neighbor’s property edge, so knowing where the true line is saves a headache.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked About Aluminum Fence in Irving

Get a Free Aluminum Fence Estimate in Irving

Call (844) 797-4808 to schedule a free on-site estimate for your aluminum fence in Irving. A live person answers 24/7, so you’re never stuck in a voicemail. We’ll walk the property line, confirm utility locates, and hand you a written, line-item quote with no surprises – plus 0% financing for 18 months and $1,000 off projects over $10,000.

Written by the team at Groundwork Construction Co.

Why Irving Chooses Groundwork Construction Co. of Dallas

We set the standard for aluminum fence in Irving.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your aluminum fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your aluminum fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local aluminum fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Aluminum Fence in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irving.

(844) 797-4808

Request a Free Estimate in Irving

Tell us about your aluminum fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch