Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Irving, TX: What the Job Actually Involves
Impact windows and doors in Irving typically run $8,000 – $25,000 for a whole-home package, and a full install usually takes 2 – 4 days once materials land on site. Impact units pair laminated or laminated-plus-PVB glass with a reinforced frame and hardware rated to hold up under wind-borne debris and pressure cycling. Call (844) 797-4808 and we’ll walk your home, count the openings, and put real numbers on paper.
Key takeaways:
- Whole-home impact packages in Irving: $8,000 – $25,000 depending on opening count, frame material, and hardware.
- Most installs take 2 – 4 days on site; custom color or oversized sliders can add 4 – 8 weeks of lead time.
- We pull the permit, schedule inspection, and leave you with the paperwork in hand.
How We Install Impact Windows & Doors, Stage by Stage
This isn’t a one-visit job. Impact units are heavier, the anchoring is more demanding, and every opening has to be flashed and sealed correctly before the next stage starts. Here’s the real sequence.
Stage 1 – Walk-through and measurements (day 1, about 90 minutes)
We measure every opening to the sixteenth of an inch, check the existing frame condition, and photograph the interior trim and exterior stops so the finished installation matches. You decide at this stage which rooms get priority, whether you’re doing the full house or the front elevation first, and whether frame color matters to you.
Stage 2 – Written estimate and product selection (2 – 5 days)
You receive a line-item quote: unit model, glass package, frame material, hardware, labor, permit, and disposal. This is where you pick between vinyl, aluminum, and fiberglass frames, and between standard laminated glass and laminated-plus-PVB. No change orders later – the number on the quote is the number you pay.
Stage 3 – Permit and manufacturing lead time (3 – 8 weeks)
We file the permit with the City of Irving and order the units. Standard white vinyl often ships in 3 – 4 weeks; custom colors, wood interiors, and oversized sliders can push into 6 – 8 weeks. We give you a firm install date as soon as the factory confirms.
Stage 4 – Removal and installation (1 – 4 days depending on count)
We protect floors and furniture, pull the old units, inspect and repair any rotted framing, flash and seal each opening, set and anchor the new unit, and reinstall interior trim. A typical 12-opening house takes about three working days. Sliders and entry doors take longer per opening because of the anchoring and threshold work.
Stage 5 – Inspection and final walk (same week)
The city inspector signs off on the permit, then we walk the house with you, check every unit for operation, confirm the locks and screens, and hand over the warranty paperwork. That’s covered by our 730-Day Done Right Promise – if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Impact windows aren’t a single product – they’re a set of decisions. Here’s what matters, with the honest trade-offs.
- Frame material: Vinyl is the most common choice for Irving homes at $700 – $1,400 per opening – good insulator, low maintenance, limited color palette. Aluminum is lighter and thinner-profiled, which matters on older homes with narrow openings, but transfers heat and runs $900 – $1,800 per opening. Fiberglass sits between the two on cost and is the strongest choice for oversized sliders.
- Glass package: Standard laminated glass is the baseline. Laminated-plus-PVB costs 10 – 15% more and improves both impact and sound performance – worth it in the Las Colinas corridor where airport and highway noise is real.
- Hardware: Multi-point locks and reinforced hinges are standard on impact units. Upgrade to stainless hardware if you want corrosion resistance against North Texas humidity swings.
- Doors: Impact entry doors and sliders are built to the same rating as windows. Sliding doors get the most attention in Irving because they’re the largest single opening on most homes.
- Brands we install: CGI, CWS, and ES Windows all manufacture impact-rated product lines that we’ve installed in this market. Each has a different lead time and warranty – we’ll walk you through the differences at the estimate.
What Impact Windows & Doors Cost in Irving, TX
A whole-home impact window and door package in Irving lands in the $8,000 – $25,000 range. That’s the number you should plan around. Per-opening pricing typically runs $700 – $1,800 for windows and $1,200 – $2,800 for entry and sliding doors. If you’re only replacing the primary windows on one elevation, expect $4,000 – $9,000 for that slice.
What pushes the job toward the high end:
- Opening count and size: 8 openings versus 22 is the biggest single variable. Oversized sliders and picture windows cost more per square foot than standard double-hungs.
- Existing frame condition: Homes in South Irving built in the 1950s – 1970s often have hidden rot behind the trim once the old unit comes out. Framing repair adds $200 – $600 per opening when it’s needed.
- Frame material and glass package: Going from vinyl to aluminum or fiberglass, or adding PVB interlayer, moves the total 10 – 25%.
- Custom color or wood interiors: Factory finish options add per-unit cost and may extend lead time by several weeks.
- Permit scope: Doing the full house under one permit is cheaper per opening than breaking it into two phases six months apart.
Every written estimate we hand you includes the units, labor, permit, disposal of the old units, and final inspection – plus our 730-Day Done Right Promise. Upfront pricing, no surprises. Call (844) 797-4808 for the free estimate – no charge, no pressure.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is two construction markets stitched together along the SH-114 corridor. On the older South Irving side – the Hospital District, the blocks off Irving Boulevard, the 75060 and 75062 ZIPs – the housing stock is dominated by 1950s – 1970s brick-veneer ranches. On those homes, the window openings were sized for single-pane aluminum units, and the sub-sill framing often needs shimming and rebuild before an impact unit can be anchored. We see more rot found on South Irving installs than anywhere else in Irving because the original flashing was never designed for the wall assemblies now being asked of it.
On the Las Colinas, Valley Ranch, and 75038/75039 corridor side, the stock is 1980s – 2000s subdivision product with tighter tolerances and standard opening sizes – the install is faster, fewer surprises, lower per-opening cost. That’s also where the noise-reduction angle sells itself: laminated-plus-PVB glass makes a real difference against the airport and highway hum.
North Texas black-clay soils are a factor too. The wet-dry cycle moves the slab, and on older Irving homes a shifted frame is often why the original windows stopped sealing – if we find that at the walk-through, we tell you before you sign, not after. Permitting runs through the City of Irving; we file it, we schedule the inspection, and you get a copy of every document. If your project grows into a full window and door replacement across the house, we scope it under one permit.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Irving
A typical home takes 2 – 4 days on site once materials arrive. Add 3 – 8 weeks of lead time for manufacturing before we start. The install itself breaks down to about 4 – 6 openings per day for windows and 1 – 2 per day for large sliders and entry doors. Call (844) 797-4808 and we’ll give you a firm schedule once we’ve measured.
Yes – impact window and door replacements require a permit from the City of Irving, and the work has to be inspected. That’s not a hurdle for us; it’s standard. We pull the permit, schedule the inspection, and hand you the signed-off paperwork. Call (844) 797-4808 to walk through what your address needs.
In most cases, yes – interior trim can stay in place if the existing opening is square and the new unit is sized to fit. On homes in South Irving and the older 75062 blocks, we sometimes find the trim was built into the old frame and has to come off. We’ll tell you at the estimate. Call (844) 797-4808 for a look.
For a full package in Irving, expect $8,000 – $25,000. Per-opening pricing runs $700 – $1,800 for windows and $1,200 – $2,800 for doors, with the total driven by opening count, frame material, glass package, and any framing repair. Call (844) 797-4808 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise on workmanship, plus the manufacturer’s warranty on the units themselves. That’s one of the longest workmanship guarantees in the residential construction space – if it’s not done right, we make it right. Call (844) 797-4808 to review the details.
Get a Free Impact Windows & Doors Estimate in Irving
We come to your home, measure every opening, show you the frame and glass options side by side, and hand you a written line-item quote – free, no pressure. Live person answers the phone 24/7, technicians are background-checked and in uniform, and every install is backed by the 730-Day Done Right Promise. If your project grows into gutting interior door and window schedules across the house, we handle that as our windows & doors service, which pairs cleanly with the yard work many homeowners add at the same time – a new aluminum fence in Irving or an iron fence in Irving installed while crews are already on site. We cover every corner of Irving, from the SH-114 corridor to Valley Ranch. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co.