A Groundwork company - serving Dallas, TX
Energy-Efficient Windows in Irving, TX | Groundwork Construction Co. of Dallas

Energy-Efficient Windows in Irving - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Energy-Efficient Windows in Irving, TX: What the Job Actually Involves

Replacing the windows in a typical Irving ranch home with energy-efficient units runs $4,500 to $15,000 and takes one to two days from tear-out to final trim. The work covers removal of the old sash and frames, framing repair where the opening has shifted, insulating and sealing the rough opening, setting new double-pane units, and finishing interior and exterior trim. Call (844) 797-4808 for a free on-site estimate before you commit to anything.

Call (844) 797-4808

How We Run an Energy-Efficient Window Job, Start to Finish

Every job follows the same order. The sequence matters more than it sounds, because skipping a prep step on an older Irving house is how you end up with a draft that no amount of caulk will fix.

Stage 1: Measure and order (day 1, about 60 – 90 minutes)

We measure every opening at three points, check the square of each frame, and photograph anything that looks off. On 1950s and 1960s homes this is where we find out that a “standard” window won’t drop in clean, because the original rough openings have settled or were never square to begin with. You’ll decide on glass package, frame material, and grid pattern at this walkthrough. Custom sizes add two to four weeks to lead time; standard sizes usually land in seven to ten days.

Stage 2: Prep and protect (day of install, first 1 – 2 hours)

Furniture gets moved back, floors get covered, and we tape off the work zone. We pull the old units out, then inspect the rough opening for rot, cracked brick, or damaged sill plate. On South Irving houses this is the step where you learn whether a simple swap is turning into a framing repair. You don’t have to be home for this, but we’ll send photos of anything unexpected before we proceed.

Stage 3: Set and seal (day of install, 2 – 6 hours)

New units get set plumb and level, shimmed, and fastened. We insulate the gap between frame and rough opening, then flash and seal the exterior joint so North Texas rain and wind-driven dust stay outside. This is the part that decides whether the window performs. A cheap window installed poorly leaks more than a mid-grade window installed right.

Stage 4: Interior and exterior finish (day of install, 1 – 3 hours)

Interior trim goes back on, exterior caulk lines get finished, and we clean the glass and haul off the old units. If you’re having us paint or stain new trim, that’s a decision made at the estimate, not on install day.

Stage 5: Walkthrough and warranty handoff (30 minutes)

We open and close every window with you, check locks and screens, and leave the written workmanship coverage in hand. Our 730-Day Done Right Promise backs the installation for two full years. If a unit sticks, fogs, or leaks because of how it went in, we come back and make it right.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Choices You’ll Weigh Before We Order Anything

Most of the cost swing on energy-efficient windows comes down to four or five decisions, and none of them are complicated once the trade-off is laid out plainly.

  • Frame material. Vinyl is the value pick, cost-effective and low maintenance, and it’s what most Irving homeowners land on. Fiberglass holds up better in extreme heat and can be painted, at roughly 20 – 30% more. Wood-clad gives you the look of real wood inside with an aluminum or vinyl shell outside, and it’s the priciest of the three.
  • Glass package. Double-pane with a low-E coating and argon fill is the baseline for real energy performance here. Upgrading to triple-pane makes sense on west-facing walls that bake in July, but the payback in a Dallas-area climate is slower than in Minnesota. We’ll tell you honestly when it’s not worth the upgrade.
  • Solar heat gain coefficient. This is the spec that matters most in Irving. A lower number blocks more of the sun’s heat. Look at the units facing west and south first.
  • Grids and style. Interior grids, simulated divided lites, and window style (double-hung versus casement) affect both look and price. Casements seal tighter. Double-hungs are easier to clean and match most ranch architecture.
  • Sound reduction. If the house sits near SH-114 or a flight path, a laminated glass option cuts aircraft and traffic noise noticeably. Worth asking about before we order.

We work with Andersen and Marvin on the higher-end frames, and there are solid value options at the mid-grade level. The right pick depends on your wall orientation and how long you plan to stay, not on the brand name on the sticker.

What Energy-Efficient Windows Cost in Irving, TX

Figure $4,500 to $15,000 for a full-home energy-efficient window replacement in Irving. A single-room job lands lower. The high end is a whole-house job with custom sizes, premium frames, and a few openings that need structural repair once the old units come out. To put it beside the broader project scope, these numbers line up with our Windows & Doors in Irving page.

Line item Typical range
Standard double-pane, low-E, per window installed $450 – $900
Premium fiberglass or wood-clad, per window $900 – $1,600
Whole-home replacement (10 – 15 openings) $4,500 – $15,000
Rough-opening or framing repair $150 – $600 per opening
Interior trim and finish work $80 – $200 per opening
Impact-rated glass upgrade $8,000 – $25,000 whole home

What moves the number

Five variables push a job toward the low or high end. How many windows is the biggest driver. Size and shape matters next: a large picture window or an arched unit costs far more than a standard double-hung. Existing condition is the wildcard on older Irving homes, where settled framing and rotted sills add repair hours. Frame and glass grade is where you choose your own ceiling. And permit scope: most like-for-like swaps don’t require a separate window permit, but a job that changes opening size or involves structural work can. We pull what’s required and confirm it in writing.

What’s in the written estimate

Our estimate lists the units by size, frame material, glass package, number of openings, trim and finish, removal and haul-off, and any allowances for repairs we can’t see until tear-out. It doesn’t include surprises later. Upfront pricing means the number you see is the number you pay for the scope we agreed to. If we open a wall and find something no one could have predicted, we stop, photograph it, price it, and wait for your approval. No change orders sneak in.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irving Homes Specifically Do to This Job

Irving is really two housing markets a few miles apart, and the split changes how a window job runs. In South and central Irving around ZIP codes 75060, 75061, and the older blocks near the Hospital District, you’re working in 1950s – 1970s brick-veneer ranches. Original single-pane aluminum windows dominate, and those openings have usually settled. Tear-out reveals out-of-square frames, aging caulk, and sill damage from decades of North Texas heat cycling through the surrounding black-clay soil. We plan extra prep time on these. Out toward Las Colinas, Valley Ranch, and the 75063 corridor, the housing stock is 1980s – 2000s subdivision product, often still on builder-grade units that fog between the panes before anything else fails.

Climate drives the payoff. Irving summers push attic temperatures high and afternoon sun on west-facing walls is brutal, so the low-E glass package earns its keep here faster than it does in mild climates. The house must be sealed correctly to capture it. HOA rules in some Irving communities restrict exterior window color, frame profile, and whether you can change the visible grid pattern. We check before ordering so the finished job clears the board the first time. We cover the whole city, and our Irving service-area page lays out the neighborhoods we work.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Energy-Efficient Windows in Irving

Get a Free Estimate on Energy-Efficient Windows in Irving

We’ll come measure your openings, check the frame condition, and tell you exactly what your job costs, no guesswork and no pressure. A live person answers the phone around the clock, so call whenever it suits you. Homeowners planning a wider front-of-house update also often pair new windows with Fence Repair in Irving or a new Iron Fence in Irving while the crew is out. For everything under our Windows & Doors service, including energy-efficient windows in Irving, call (844) 797-4808 to schedule your free estimate.

Written by the team at Groundwork Construction Co.

Why Irving Chooses Groundwork Construction Co. of Dallas

We set the standard for energy-efficient windows in Irving.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your energy-efficient windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your energy-efficient windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local energy-efficient windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Energy-Efficient Windows in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irving.

(844) 797-4808

Request a Free Estimate in Irving

Tell us about your energy-efficient windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch