Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in Irving, TX: What the Job Really Involves
Gutters & accessories work in Irving usually means a full replacement of the run, downspouts and hangers, and it takes one to two days on a typical ranch home, running roughly $1,800 to $6,500 installed depending on lineal footage, material and how much fascia repair the old system hid. Half-round or box profile, aluminum or steel, seamless or sectional: the choices are yours, but the number is fixed before we start. Call (844) 797-4808 for a free on-site estimate, with a written line-item quote before anyone touches the roof edge.
Day One Through Day Two: How We Actually Run a Gutters & Accessories Job
Most gutter work looks simple from the ground. It never is once you’re up there, especially on the older Irving housing stock where the fascia behind the old gutter has been quietly soaking for years. Here’s the sequence we follow, and where you make the calls.
- Stage 1: Walk and measure (30 – 45 minutes). We run a string line along the roof edge, check the fascia for rot, and measure lineal footage and downspout drop points. You decide the material and profile here, or we take measurements away and quote. Nothing gets ordered until you’ve seen the numbers.
- Stage 2: Tear-off and fascia inspection (2 – 4 hours). Old gutters come down, hangers come out, and we expose the fascia board. On a 1960s South Irving ranch this is the moment of truth: soft wood, old spike holes, sometimes a rotted run along a valley. You get a call with photos and a price for any fascia repair before we continue.
- Stage 3: Fascia and hanger prep (2 – 3 hours). Rotted sections get replaced, hangers are set on 24-inch centers (16-inch on steep runs and heavy-rain exposures around Las Colinas), and we check the pitch so water actually reaches the downspout instead of pooling at the low corner.
- Stage 4: Installation (3 – 6 hours). Seamless aluminum is formed on site, so the run is one continuous piece with joints only at corners and outlets. Downspouts are set, elbows fitted, and we check that discharge sends water away from the slab, not into the black-clay soil right at the foundation line.
- Stage 5: Water test and cleanup (45 minutes). We run a hose at the high end and watch the whole system carry. You walk it with us before we pack up. Any adjustment happens on that visit, not on a callback next week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Profiles, Materials and Accessories: The Choices You’ll Actually Make
There’s no single right answer here. What fits a 1950s brick ranch off the old downtown grid isn’t what fits a 1990s Valley Ranch two-story. Here’s the honest trade-off of each.
- Seamless aluminum (K-style): The default for most Irving homes. Formed on site, no mid-run joints, painted finish that holds up to North Texas sun. Lighter gauge dents under a ladder; heavier gauge costs more but shrugs off hail better. Most affordable of the metal options.
- Steel (galvanized or painted): Heavier, holds its shape, handles tree limbs and hail far better than aluminum. Costs noticeably more and can rust at cut edges over time, so it suits long-run homes where the look matters.
- Half-round profile: The period-correct look for older homes near the Hospital District and the historic core. Carries less volume per inch of width than K-style, so it needs more frequent hangers and a slightly bigger size on big roof planes.
- Downspout configuration: 2×3 versus 3×4 matters more than most homeowners realize. One 3×4 downspout moves roughly the water of two 2x3s, and on a big roof plane that’s the difference between a system that keeps up in a spring storm and one that overflows at the gutter end.
- Accessories: Leaf guards (mesh versus reverse-curve, with mesh winning on pine needles and reverse-curve winning on large leaves), splash blocks or buried discharge lines, and rain barrels. Guards reduce cleaning but never eliminate it, so budget for an annual check either way.
- Fascia and soffit: If the wood is soft, this runs alongside the gutter replacement. Skipping it means new gutters screwed into failing wood, which is the single most common call-back we see.
What Gutters & Accessories Costs in Irving, TX
Plan on $1,800 to $6,500 installed for a typical single-family home in Irving, with most jobs landing around $2,400 to $3,800. Larger two-story roofs, steel or half-round profiles, and fascia repair push toward the top of that range. Here’s the line-item picture.
| Item | Typical Range |
|---|---|
| Seamless aluminum, installed (per lineal foot) | $7 – $14 |
| Steel or half-round, installed (per lineal foot) | $12 – $22 |
| Downspouts, installed (each) | $80 – $180 |
| Leaf guard, installed (per lineal foot) | $6 – $16 |
| Fascia repair (per lineal foot) | $12 – $30 |
| Full replacement, typical single-family home | $1,800 – $6,500 |
What pushes a job to the high end: roofline complexity (valleys, dormers, two-story drops), the existing fascia condition, material grade, downspout count and where they can discharge, and whether old hangers have to be pulled out of damaged wood. What a written estimate includes: tear-off, disposal, new hangers, downspouts, and the water test. What it typically doesn’t: fascia replacement (quoted separately once we see it), buried discharge lines, and any roof repair the inspection turns up.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is really two housing markets sharing a zip code map. In the mid-century core around the old downtown, Hospital District and South Irving (75060, 75061, 75062), the gutters we pull are often the original 1960s sections, spiked into fascia that’s been holding water for a decade behind a sagging run. That’s the most common failure mode here: not a gutter that wore out, but a gutter that took the wood with it. The 75037, 75062, 75038 and 75039 zips we serve span both worlds, and the Las Colinas, Valley Ranch and DFW-corridor edge (75038, 75039, 75063) brings 1980s – 2000s subdivision product where the run is longer and the tear-off is faster because the wood is still sound. North Texas black-clay soils matter too. Water dumped right at the slab line swells and shrinks the soil through the wet-dry cycle, which is why discharge placement and grade matter more here than in sandier metros. And when the roof itself is at the end of its life, the gutter conversation is often just a piece of a bigger one. If that’s where you are, look at Roofing in Irving before we order hardware, and check our Roofing service for the full scope. We cover the whole of Irving, and a lot of homeowners pair the gutter job with Sliding & Patio Doors in Irving or Impact Garage Doors in Irving while we’re on the property.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Gutters & Accessories in Irving
Most Irving homes are done in one to two days, with seamless aluminum running same-day and steel or half-round needing a second visit for forming and trim. Fascia repair can add half a day. Call (844) 797-4808 and we’ll give you a firm schedule in the estimate.
Gutter replacement on its own normally doesn’t require a permit, but fascia or structural repair tied to it can, and anything touching the roof sheathing pulls the roofing scope into the permit picture. We pull what’s required and pass the inspection before we call the job done. Call (844) 797-4808 and we’ll tell you exactly what applies to your address.
Installed cost on a typical single-family Irving home runs $1,800 to $6,500, with most jobs landing around $2,400 to $3,800 depending on footage, material and fascia condition. Call (844) 797-4808 for an exact quote on your home, free and on site.
Not on the gutter system itself: the number in the written estimate is the number you pay, and fascia repair is quoted separately once we’ve had eyes on the wood, with your approval before we go ahead. No surprise line items on the final invoice. Call (844) 797-4808 for the estimate.
Every gutter job we install is backed by our 730-Day Done Right Promise, which covers workmanship, and it’s one of the longest workmanship guarantees in the residential construction space. If a hanger pulls, a joint leaks or a run loses pitch, we come back and make it right. Call (844) 797-4808 to get it scheduled.
Get a Free Gutters & Accessories Estimate in Irving
A free on-site estimate for gutters & accessories in Irving starts with a real walk of the roofline, a fascia check and a written line-item quote you can compare. Call (844) 797-4808 and a live person answers, any hour, any day. We’ll ask a few questions about your home, then set a time to measure. From founding to finish, no surprises.
Written by the team at Groundwork Construction Co. of Dallas.