Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl fence in Irving, TX: scope, timeline, and what it costs
A vinyl fence in Irving, TX typically runs $3,500 to $9,000 for a standard residential lot, with most jobs finished in 2 – 4 days once materials land on site. You’re buying PVC panels and posts that won’t rot, won’t need paint, and hold color through North Texas summers that punish anything painted. Call (844) 797-4808 for a free on-site estimate, and we’ll walk the property line with you before you commit to anything.
How we build a vinyl fence, stage by stage
The order of work matters more on vinyl than people expect. Posts set in the wrong place or at the wrong depth will lean within two summers on this clay, and correcting them means starting over.
Stage 1: Layout and utility locate (day one, about 2 hours)
We walk the property line with you and stake every post location. You decide the exact run, gate placement, and height before anyone digs. Then the 811 locate request goes in so nobody puts a post through an irrigation line or a gas service. This is the stage where changes are free. After this, moving a post costs money.
Stage 2: Demolition and post holes (day one into day two)
Old wood fencing comes down and hauls off. Post holes get dug to depth based on frost line and soil, then filled with concrete. On Irving’s black-clay ground, hole depth and concrete volume are the whole ballgame. We over-dig and set posts deeper than a dry-soil market would require, because that clay moves. Posts cure before anything hangs on them.
Stage 3: Rails and panels (day two into day three)
Rails go in first, then panels slide or snap into place depending on the system you picked. This is the fastest stage and the most visible. You’ll see the fence take shape in a few hours. It’s also where panel grade shows: a premium extrusion sits straighter in the sun than a builder-grade panel, and you can see the difference on a long run.
Stage 4: Gates and hardware (day three)
Gates get their own posts, reinforced with a metal insert, because a vinyl gate post takes more load than any panel post on the property. Hinges, latches, and the drop rod (if you’re doing a double drive gate) get set and adjusted. We swing every gate ourselves before we call it done.
Stage 5: Cleanup and walkthrough (day three or four)
Concrete spoil gets removed, the site gets raked, and we walk the finished fence with you. You check the line, the gates, and every post. Anything that needs adjusting gets adjusted before we leave. Our technicians have up to 12 years of experience, and the 730-Day Done Right Promise covers workmanship for two full years after that walkthrough.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The vinyl fence options you’ll choose between
Vinyl isn’t one product. The specs you pick move both the price and how the fence looks eight years from now. Here’s what actually comes up:
- Panel grade: builder-grade single-wall panels are the cheapest and the most likely to sag and chalk. Premium double-wall or reinforced extrusions cost more and hold their shape and color far longer. On a long, sun-exposed run, the upgrade pays for itself in appearance.
- Height: 4-foot, 5-foot, and 6-foot are the standard residential heights. Six-foot gives privacy and wind resistance trade-offs; 4-foot reads more open and costs less per linear foot. Most Irving homeowners land on 6-foot for back lines and 4-foot near the front.
- Style: privacy (solid tongue-and-groove panels), semi-privacy (picket with spacing), and ranch rail (2 or 3 rails, no infill). Privacy costs the most; ranch rail the least. Pick by what the fence needs to do, not by what looks best in a catalog photo.
- Color: white is the classic and the most common. Tan, gray, and two-tone (dark posts, light panels) are popular now and hide dust better than white in this climate.
- Gate configuration: single walk gate, double drive gate, or both. Every gate adds hardware, a reinforced post, and labor. Tell us early where vehicles need to pass.
One honest trade-off: vinyl is not the cheapest fence per foot, and it’s not the right fence for every lot. On a short run tucked behind a garage, wood or chain link can cost less. On a long property line facing the street, vinyl’s zero-maintenance finish is what most homeowners here are actually buying. If you want the wider picture on materials and layout, our fence installation service covers the full range, and the Fence Installation in Irving page breaks down what each style does on an Irving lot.
What a vinyl fence costs in Irving, TX
Plan on $3,500 to $9,000 for a typical residential vinyl fence in Irving. That range covers most standard lots. Here’s what pushes a job toward either end:
- Linear footage: the single biggest driver. A 120-foot back line and two short sides sits near the low end; a full-perimeter job with a front return climbs toward the top.
- Height and style: 6-foot privacy panels cost more per foot than 4-foot ranch rail, both in material and in post load.
- Panel grade: premium extrusions add cost up front and last longer. Builder-grade saves money now and shows wear sooner.
- Gates: each gate adds hardware, a reinforced post, and labor. A double drive gate is the priciest single element on most jobs.
- Site conditions: removing an old fence, clearing brush, or working around a slope or a tight property line adds labor. Rocky or heavily rooted ground slows post digging.
A written estimate from us lists the linear footage, panel grade, post spacing and depth, gate count, demo and haul-off, and the concrete. What it typically doesn’t include: survey work if the property line is disputed, HOA application fees, or repairs to irrigation lines hit during digging. We flag those before we start so there are no surprises. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irving homes specifically do to a vinyl fence job
Irving is really two construction markets stitched along the SH-114 corridor, and that split changes how a fence job runs. In South and central Irving, around the old downtown and the Hospital District in 75060 and 75061, the housing stock is 1950s – 1970s brick-veneer ranches on postwar lots. Those lots often have mature trees, tight side yards, and existing fences that have been patched for decades. Teardown-rebuilds and room additions are constant here, which means we’re often setting a new fence line against a lot that’s actively changing. Out toward Las Colinas and Valley Ranch, the lots are newer and the property lines cleaner, but HOA rules are tighter and color and height approvals come up more often.
The other local factor is the ground. North Texas black-clay soil swells and shrinks with every wet-dry cycle, and that movement is why post depth and concrete volume matter more here than in a sandy-soil market. We set posts deeper and use more concrete than a dry-climate crew would, because a fence that ignores the clay will lean within two summers. We cover Irving and the surrounding neighborhoods, and homeowners often pair a new fence with Asphalt Driveways & Resurfacing in Irving or Driveway Repair & Replacement in Irving when the whole exterior is getting refreshed at once.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vinyl Fence in Irving
Most residential vinyl fence jobs in Irving take 2 – 4 days from start to cleanup, assuming materials are on site and weather cooperates. Post setting takes day one and part of day two, panels and gates take another day, and cleanup finishes it. Rain delays are the main variable. Call (844) 797-4808 and we’ll give you a realistic timeline for your specific lot.
Most residential vinyl fences in Irving don’t require a building permit, but height limits and setback rules still apply, and HOA approval is a separate question. We check local requirements for your address before we stake the line, so you’re not surprised after the fact. Call (844) 797-4808 for a free estimate and we’ll walk you through what applies to your property.
In most cases, yes. We stake the line with you first, then call in the utility locate before any digging, and we hand-dig around irrigation runs where needed. Mature plantings near the line can usually stay. Call (844) 797-4808 to schedule a walkthrough so we can flag any trouble spots before we start.
Most vinyl fences in Irving land between $3,500 and $9,000, depending on linear footage, height, panel grade, and gate count. A short back-line job sits near the low end; a full-perimeter privacy fence with a drive gate climbs toward the top. Call (844) 797-4808 for an exact quote. Estimates are free and itemized.
Every vinyl fence we install is covered by our 730-Day Done Right Promise on workmanship. If a post leans, a panel fails, or a gate hangs wrong within that window, we make it right. Manufacturer warranties on the panel material run longer and pass to you as the homeowner. Call (844) 797-4808 and we’ll explain exactly what’s covered before you sign anything.
Get a free vinyl fence estimate in Irving
Call (844) 797-4808 and a live person answers, any hour, any day. We’ll ask a few questions about your lot and line length, then schedule a free on-site estimate where we stake the run with you and hand you a written, itemized quote. No pressure, no surprise change orders. The number on that quote is the number you pay, and the 730-Day Done Right Promise backs the work in writing.
Written by the team at Groundwork Construction Co. of Dallas.