Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Irving, TX: What It Costs and How Long It Takes
Backsplash, tile and flooring work in Irving, TX runs $800 – $2,500 for a backsplash alone and $14,000 – $45,000 when tile and flooring are part of a full kitchen scope, with most single-trade jobs finishing in 2 – 5 days. Tile work is the part of a kitchen that shows every shortcut, and in Irving’s builder-grade subdivisions it’s usually the first thing a homeowner wants replaced. Call (844) 797-4808 for a free on-site estimate with a written, line-item price.
How We Run a Tile and Flooring Job, Stage by Stage
Every Irving job follows the same five stages, and you’ll know the schedule before demo starts.
Day 1, protect and demo. We mask cabinets, counters and appliances, then remove the old backsplash, flooring or both. A backsplash tear-out takes 2 – 4 hours; a full kitchen floor tear-out runs a full day. You decide now whether the old material gets hauled off or whether any of it is worth salvaging (rare, but we check).
Days 1 – 2, substrate prep. This is where most of the risk lives. We check for soft subfloor, high joists, old adhesive, and any moisture damage around the sink or dishwasher. In Irving’s older homes we often find the original vinyl over plywood with a second layer glued on top, which has to come up so the new tile sits flat. Prep can take half a day on a clean slab and a full day on a floor that needs leveling.
Days 2 – 3, layout and dry-fit. You approve the layout before a single tile is set. That means grout line width, whether the backsplash tile runs behind the range or stops at the hood, how the floor pattern breaks at doorways, and where cuts land. We lay out full tiles and mark cuts so you see it rather than imagine it. This is the decision point most homeowners underestimate, and it’s the one that decides whether the finished job looks planned or patched.
Days 3 – 4, set and grout. Tile goes down or up, then cures before grout. Large-format floor tile needs a longer cure than a mosaic backsplash. Grout goes in on the following day, not the same afternoon, because rushing it is how grout cracks at the joints six months later.
Day 5, seal, caulk and walkthrough. We seal natural stone, caulk the wet-wall joints with flexible caulk rather than grout, reinstall outlet covers and appliance trim, and walk the job with you. Any punch item goes on a written list and gets scheduled before we call it done. Most tile jobs in Irving close in 2 – 5 working days depending on square footage and substrate condition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The material decision drives most of the price and all of the maintenance story. Here’s the honest trade-off on each.
- Ceramic backsplash tile: The budget choice, roughly $4 – $12 per square foot installed. Easy to cut, easy to clean. It chips more than porcelain and looks dated faster on a large wall.
- Porcelain tile (backsplash and floor): $8 – $20 per square foot installed. Denser, more water-resistant, holds up better in a busy kitchen. Heavier and harder to cut, so intricate patterns cost more in labor.
- Natural stone (travertine, marble, slate): $15 – $35 per square foot installed. Beautiful and unique, but it’s porous, needs sealing, and will show every splash if you skip the sealer. Suits a homeowner who wants the look and will maintain it.
- Large-format porcelain floor tile: 24×24 or larger tiles mean fewer grout lines and a cleaner look. The trade-off is a flatter substrate requirement; a floor that isn’t level will show lippage on big tiles that a small mosaic would hide.
- Luxury vinyl plank (LVP) flooring: Where the kitchen floor takes heavy traffic and budget matters, LVP runs $4 – $10 per square foot installed and handles water better than wood. It doesn’t have the feel of tile, and it won’t last as long in a wet zone.
- Grout and trim: Sanded versus unsanded grout, sealed versus epoxy, and whether you finish with a matching schluter trim or a simple caulk line. Small choices, visible result.
We bring samples to the estimate so you’re comparing real material, not a photo on a screen. Quikrete and Sakrete underlayment and setting products are what we use on most Irving slab floors because they’re predictable in this climate.
What Backsplash, Tile & Flooring Costs in Irving, TX
For Irving, expect $14,000 – $45,000 when tile and flooring are part of a full kitchen scope, with the backsplash portion alone at $800 – $2,500. A single-trade job, say a backsplash replacement on a 25-square-foot wall, typically lands in the $900 – $1,800 range once material and labor are priced out.
What pushes a job toward the high end:
- Square footage and layout complexity: A simple running-bond backsplash is fast. A herringbone or chevron pattern with a mosaic inset triples the labor per square foot.
- Substrate condition: A soft subfloor, uneven slab, or old adhesive that won’t come up cleanly adds prep days and material.
- Material grade: Moving from ceramic to porcelain or stone is the single biggest line item change. A $6-per-square-foot ceramic and a $30-per-square-foot marble are the same square feet and very different dollars.
- Relocating plumbing or electrical: Moving an outlet, adding an under-cabinet circuit, or rerouting the dishwasher line adds trades and inspection time.
- Whether it’s part of a larger scope: Tile inside a Kitchen Remodeling in Irving benefits from shared demo and prep, so the tile line item is often lower than a standalone tile job.
Every written estimate lists material, labor, prep, haul-away, and permit line items separately. What it doesn’t include: structural changes, plumbing relocations you decide on after signing, and any tile the manufacturer discontinues mid-job (we flag that risk at estimate).
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving is two construction markets stitched together along the SH-114 corridor, and the split changes how we prep this work. In the older South Irving and central core around the old downtown and Hospital District (ZIPs 75060, 75061, 75062), the housing stock is 1950s – 1970s brick-veneer ranches and small tract homes. Many are being scraped, rebuilt or expanded as infill, and the tile and flooring we put in often sits on original shallow footings over North Texas black-clay soil. That clay swells and shrinks with the wet-dry cycle, so a slab that moved before you bought the house will keep moving, and a floor that isn’t re-checked for flatness before tile goes down will crack at the grout lines within a season. We check slab flatness on every South Irving job; it’s the single most common cause of tile failure we see.
Out along the Las Colinas, Valley Ranch and DFW-corridor edge (75038, 75063), the work is 1980s – 2000s subdivision product plus hospitality and multifamily buildings tied to the airport and the Irving Convention Center. That means larger kitchens, different cabinet geometry, and sometimes commercial-grade specs in a residential unit. We work in the 75037, 75062, 75038 and 75063 ZIPs regularly and adjust the prep plan to the build era.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Irving
Most Irving backsplash and flooring jobs finish in 2 – 5 working days. A backsplash replacement alone takes 1 – 2 days; a kitchen floor adds 2 – 3 more depending on substrate prep and tile size.
Typically no permit is required for a simple tile or flooring replacement, but relocating plumbing or electrical in the kitchen does trigger a permit and inspection. We pull permits when the scope calls for them and note the line item in the written estimate before you sign.
Yes, and that’s the most common scope we run in Irving. Replacing backsplash and flooring while the cabinet and plumbing layout stays put keeps the job fast, keeps cost down, and avoids the inspection timeline.
Backsplash alone runs $800 – $2,500, and full tile and flooring within a kitchen scope lands at $14,000 – $45,000. The difference comes down to square footage, substrate prep, and material grade. Call (844) 797-4808 for an exact quote; estimates are free.
Our tile and flooring work is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a grout line cracks or a tile lifts within that window, we come back and make it right.
Get a Free Backsplash, Tile & Flooring Estimate in Irving
If the backsplash and floor are the part of your kitchen that’s showing its age, we’ll come out, measure, show you samples, and put the number in writing. Our team covers all of Irving, 75037, 75038, 75062 and 75063, and we answer the phone with a live person at (844) 797-4808, around the clock. Homeowners often pair this work with Vanities, Tile & Fixtures in Irving or a Tub-to-Shower Conversion in Irving on a broader refresh; if your project is bigger, look at our kitchen remodeling service for the full scope.
Written by the team at Groundwork Construction Co.