Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Duncanville: Cost, Timing, and What to Expect
Patios, walkways & pool decks in Duncanville usually run $3,500 – $11,000 for a paver patio, with walkways and pool surrounds priced by the square foot and by how much prep the old slab needs. A typical 300 – 450 sq ft patio takes 5 to 10 working days from demo to sealed finish, and pool deck resurfacing or paver-over-concrete often lands in 4 to 7 days. Call (844) 797-4808 for a free on-site estimate with line-item pricing before anything gets torn out. Then read on, because the details below are the ones that decide your final number.
What the job looks like, stage by stage
Outdoor hardscape isn’t a one-day pour-and-go. Here’s the sequence we actually run on a Duncanville patio or pool deck, and what you’re deciding at each point.
Stage 1: Site walk and layout (Day 1)
We mark the patio or walkway footprint with paint and string, check drainage fall away from the slab or house, and confirm where the downspouts and pool equipment sit. You approve the layout and the paver or finish selection at this stage. If the design calls for a fire pit, seat wall, or pergola footing, that gets set here too, because it changes the base depth.
Stage 2: Demo and excavation (Days 1 – 3)
Old concrete, cracked pavers, or a failed deck coating comes up, and we dig down to the base thickness the finish needs: typically 6 to 8 inches for pavers over a compacted aggregate base. On 1950s – 1970s homes, this is where we sometimes find an old stoop footing or a stray drain line that has to be rerouted before we can pour or lay. You decide then whether to adjust the layout or absorb the change into the written quote.
Stage 3: Base, drainage, and compaction (Days 2 – 5)
Aggregate goes in lifts and gets plate-compacted until it’s solid. We set the slope and, where needed, a channel drain or French drain so water moves away from the house and pool instead of pooling at the door. This stage is where a patio either lasts 30 years or settles in 3, and it’s the step most shortcut bids skip.
Stage 4: Surface install (Days 4 – 8)
Pavers get laid on the compacted base and sand-set or poly-sand-set; concrete gets formed, poured, and finished (broom, stamped, or exposed aggregate); a pool deck might get a cool-deck overlay or new pavers bedded over the existing slab if it’s sound. You confirm border pattern, color, and edge restraint before the finishing pass.
Stage 5: Finish, seal, and walkthrough (final 1 – 2 days)
We clean up, apply sealer where the finish calls for it, re-grade soil against the new edge, and walk the job with you. Any punch items get logged on the spot and covered by our 730-Day Done Right Promise, which means if the work isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
You’re really making three calls: surface material, edge and border detail, and how much built-in feature you want. Each has a trade-off.
- Clay or concrete pavers: The most popular choice in Duncanville for patios and walkways. They flex with our clay soil and can be pulled and reset if a line settles. Higher upfront cost than plain concrete, but they hold up better to our freeze-thaw and heavy-summer expansion cycles.
- Stamped concrete: Lower cost per square foot and a clean, seamless look. The catch is that in black clay soil it can crack along control joints and is harder to repair invisibly than pavers.
- Exposed aggregate or broom concrete: The budget-friendly walkway and pool-deck option. Good grip when wet, limited design flexibility.
- Cool-deck coating or overlay: A surface treatment over a sound existing pool deck. It runs cooler underfoot in a Duncanville summer and refreshes an old slab instead of tearing it out, but it rides on the slab underneath, so if that slab has structural cracks, it’s not the fix.
- Edge restraint and borders: A soldier-course border or concrete curb locks the field in place. Cost goes up slightly; longevity goes up a lot.
- Built-in features: Fire pits, seat walls, pergola footings, and step-downs. Each adds materials and time, so we price them as separate line items in the written quote so you can see exactly what each one costs.
On the plumbing and finish side, if a pool deck or outdoor kitchen is part of the project, we spec fixtures from brands like Delta and Blanco where they’re relevant, and we hold every finish to the same upfront pricing standard: the number you see is the number you pay.
What Patios, Walkways & Pool Decks cost in Duncanville, TX
A paver patio in Duncanville runs $3,500 – $11,000 depending on size and detail. Here’s how the line items typically break down for a combined patio, walkway, and pool deck job.
| Scope | Typical range |
|---|---|
| Paver patio install (300 – 450 sq ft) | $3,500 – $11,000 |
| Walkway (per linear foot, pavers) | Priced within the patio range on combined jobs |
| Pool deck resurface / overlay | Quoted on-site; depends on existing slab condition |
| Demo and haul-off of old concrete | Bundled into the written quote as a line item |
| Drainage (channel or French drain) | Priced per run, quoted on-site |
Four things push a job from the low end to the high end: size (a 250 sq ft patio vs. a 700 sq ft pool surround with walkways), existing condition (sound concrete you can overlay vs. a cracked, heaved slab that has to come out), material grade (basic concrete pavers vs. premium clay or tumbled stone), and drainage and grading scope (a simple slope vs. a full channel drain with catch basins). Foundation or slab repair discovered during demo is the wildcard, and in Duncanville it’s common to run into settled areas that need leveling before the new surface goes down. Your written estimate itemizes demo, base, drainage, materials, and finishing. It does not include landscape plant replacement, pool equipment, or grading beyond the patio edge, which we’ll flag clearly before you sign.
See the difference
Before
After
Before
After
Before
AfterWhy a Duncanville yard is a different job than a new-build lot
Duncanville is a built-out, mostly post-war bedroom city in southwest Dallas County. Nearly every patio, walkway, or pool deck we build here is a renovation on a 1950s – 1970s single-family home, and that changes everything. We’re tying into aging slabs and original cast-iron or early PVC drains, not fresh construction. The expansive black clay soil under Duncanville heaves with every wet-dry cycle, so we routinely find settled or cracked slabs where a patio needs to attach, and we price foundation or under-slab repair before we lay a single paver. That’s the opposite of the fast-growth new-build corridor in neighboring cities like Midlothian or Waxahachie, where the lot is clean and the base is fresh.
North Texas weather works against us too: 100°F-plus summer stretches, moderate freezes, and spring hail and straight-line wind. For uncovered patios and pool decks, we spec paver thickness and edge restraint to handle thermal movement, and if the patio ties into a covered structure or pergola, we coordinate with the roofing scope so hail-rated material gets used there too. Homeowners frequently pair a backyard patio and pool deck with a larger outdoor-living build, which is why some clients add our Driveway & Pavers in Duncanville work in the same visit, and others fold in an ADU Site Prep & Utilities in Duncanville job when they’re extending the backyard footprint. It’s all part of a full Driveway & Pavers scope done right, from foundation to finish line, backed in writing. And when a client is renovating the inside and outside at once, we coordinate with our Full Kitchen Remodeling in Duncanville team so the two projects don’t fight over the same driveway.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Patios, Walkways & Pool Decks in Duncanville
Most patios run 5 to 10 working days from demo to finish, and a pool deck overlay or paver surround typically takes 4 to 7 days. Larger jobs with multiple walkways, drainage, and built-in features can stretch to two to three weeks, and we give you the staged schedule in writing before we start so you know when to clear your schedule.
In most cases a ground-level patio or walkway doesn’t need a building permit, but any structure with a roof, a raised deck over 30 inches, or tied-in electrical and gas (like a fire pit or pergola with power) does. Because the surrounding housing stock is 1950s – 1970s, additions and covered structures often trigger an inspection on the existing electrical panel, and we build that into the estimate rather than surprising you mid-job.
Yes, if the slab is structurally sound, level, and drained. We check for cracks, settlement, and thaw-heave damage first; if it passes, a paver overlay or cool-deck resurface saves you the demo cost and days of work. If the slab is cracked or heaving in the black clay soil, an overlay just copies the problem, and we’ll say so before we quote either option.
A combined patio-and-pool-deck project typically starts around $3,500 and runs to $11,000+ depending on square footage, material, and drainage. We separate each scope into line items on the written estimate so you can see the cost of the patio, the walkway, and the pool surround side by side, and you can trim or add without guesswork. Pricing includes demo, base, drainage, materials, and finishing, so there are no change orders later. Call (844) 797-4808 for an exact quote on your yard – estimates are free.
Every patio, walkway, and pool deck we build carries our 730-Day Done Right Promise. If something isn’t right, whether it’s a settled edge, a drainage problem, or a finish issue, we return and fix it. That’s one of the longest workmanship guarantees in residential construction, and it’s written rather than implied. Call us for a free on-site estimate and we’ll walk the yard, talk options, and leave you with a fixed, itemized price. Our technicians have up to 12 years of experience on this kind of work, and we schedule a live person to answer every call, 24/7. If your project spans more than a backyard patio, you can also see everything we cover on our Duncanville service-area page.
Ready for a free estimate on your Duncanville patio, walkway, or pool deck?
We start with a free on-site estimate: we walk the yard, check the existing slab or soil, and leave you with an itemized, fixed price for the patio, walkway, or pool deck. We’re a live-person call away at (844) 797-4808, 24 hours a day. You’ll know your scope, your materials, and your number before anything is demoed, and the 730-Day Done Right Promise stands behind the finished job.
Written by the team at Groundwork Construction Co.