Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Small & Partial Kitchen Remodels in Duncanville, TX: Scope, Timeline, and Cost
A small or partial kitchen remodel in Duncanville, TX runs $14,000 – $45,000 and takes about two to five weeks of active work, depending on how much is being touched. These projects skip the full tear-out: you keep the room’s footprint and most of the layout, and update what’s worn, dated, or failing. Call (844) 797-4808 for a free on-site estimate. Techs on our jobs carry up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise.
How the Work Actually Goes, Stage by Stage
Kitchens are a sequencing problem before they’re a construction problem. Here’s what a small kitchen remodel looks like from the first walkthrough to the last coat of paint.
Stage 1: Site walk and scope lock (day 1)
We measure the room, check what’s behind the walls and under the cabinets, and test the existing plumbing and wiring against what you want to keep. On 1960s and 1970s Duncanville slabs, this is where we find out whether the drain and supply lines can stay or need to move. You decide the finish grade and confirm which appliances stay versus go. A written, line-item quote follows.
Stage 2: Demo and substrate prep (days 2 – 5)
Cabinets, counters, backsplash, and flooring come out. Cabinet boxes being reused get refaced or boxed-onto rather than replaced. We open up at least one inspection point per trade. On a partial remodel this is the highest-risk window, because old subfloor, drywall, or wiring often surprises you.
Stage 3: Rough-in and inspection (days 3 – 8)
If plumbing, gas, or electrical is moving, the rough-in gets inspected before any finishes go back. This is the stage that requires a permit. If nothing’s moving, the drywall stays up and you skip the permit. You finalize appliance specs, countertop selection, and backsplash material during this window. Choose before cabinets are hung, because it affects the counter and installation schedule.
Stage 4: Finish install (days 8 – 20)
Cabinets go in, then counters, then backsplash, then fixtures and lighting. Cabinet installation runs $4,000 – $13,000; countertop installation runs $2,000 – $6,500. Cabinets arrive 2 – 4 weeks after order, and stone counters are templated after cabinets are set, so there’s a built-in drying window. You sign off on door style, finish, and counter edge before order.
Stage 5: Punch list and final walkthrough (days 20 – 25)
We test every fixture, adjust doors and drawers, caulk, touch up paint, and walk the room with you. Anything on the punch list gets fixed before we call it done, and the 730-Day Done Right Promise starts from the final walkthrough.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Actually Choosing Between
The decisions that shape a partial kitchen remodel usually fall into five buckets. Here’s the honest trade-off on each.
- Cabinets – full replacement vs refacing vs paint. Full replacement runs $4,000 – $13,000 for a small kitchen and gives you new layout options. Refacing keeps the boxes and swaps doors and fronts for about half that. Paint is the cheapest but only makes sense on solid oak or maple boxes. KraftMaid is our standard for full replacement.
- Countertops – quartz, granite, or laminate. Quartz holds up well in humid summers and needs no sealing; budget $2,000 – $6,500. Cambria is a strong quartz choice. Granite is more forgiving on heat but needs periodic sealing. Laminate stays cheapest for a rental or a flip.
- Backsplash – full-height vs 4-inch. Full-height tile costs $800 – $2,500 and gives you a wipe-down surface. A 4-inch splash is standard and much cheaper. In a heavy-cooking household, go full-height.
- Flooring – LVP vs porcelain tile. LVP handles North Texas slab movement better because it flexes. Porcelain costs more but resists water and stays cooler. Most partial remodels here choose LVP for the kitchen. Sakrete and Quikrete self-leveling compounds are what we use to level a slab before flooring goes down.
- Kitchen island – add one or don’t. A new island runs $3,000 – $10,000 installed. It’s worth it on an open plan but usually a waste of space in the galley layouts common to Duncanville’s 1960s stock.
What Small & Partial Kitchen Remodels Cost in Duncanville, TX
Most jobs land between $14,000 and $45,000. A cosmetic refresh (paint, hardware, backsplash) sits near the bottom. A finish-grade project with cabinet replacement and quartz sits near the top. Here’s what drives the number.
| Line item | Typical range |
|---|---|
| Full kitchen remodel (for reference) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What pushes a job low vs high: (1) Size, meaning number of cabinet runs and linear feet of counter. (2) Existing condition, especially whether the slab needs leveling or the cabinets have water damage. (3) Whether plumbing, gas, or electrical relocates, since that’s the biggest single multiplier. (4) Finish grade. (5) Permit scope: pulling a permit for moving mechanicals adds inspection time and cost; leaving systems in place often doesn’t.
What’s in our line-item quote: demo, haul-away, substrate prep, permits where required, materials, labor, and the final walkthrough. What’s not: appliance costs (you buy, we install), any foundation work discovered mid-project, and structural changes if a wall turns out to be load-bearing after opening it up. We quote foundation work upfront when there’s any doubt. See our kitchen remodeling service overview for how this fits the wider lineup, or the Kitchen Remodeling in Duncanville page if your project is turning into a full gut.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville Homes Specifically Do to This Job
Duncanville is a built-out, largely post-war bedroom city in southwest Dallas County. Nearly all the work we do here is renovation and addition on 1950s – 1970s brick-veneer ranch homes across ZIPs 75116, 75137, and 75138, not new construction. That means we’re almost always tying into aging slabs, original cast-iron or early PVC drains, and panel-age electrical under current permitting scrutiny. It’s a different job from the fast-growth new-build corridor out toward Midlothian and Waxahachie.
The expansive black clay soil across Duncanville heaves and shrinks with wet-dry cycles, so foundation repair and slab-crack remediation are routine line items. We price any foundation work before the interior renovation begins, never after cabinets are ordered. On top of that, the hot, humid summers push ventilation and insulation upgrades into the scope, and the spring hail and wind events mean north-facing walls and exterior penetrations get extra scrutiny. HOA rules on exterior modifications matter most on the 1980s and 1990s subdivisions; the older ranch pockets are usually freer. We cover Duncanville and its neighbors as part of our Duncanville service area.
Homeowners often pair this with a Small Bathroom Remodels in Duncanville ticket, or a Roof Repair in Duncanville before the interior work so weather intrusion doesn’t undo the kitchen.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Small & Partial Kitchen Remodels in Duncanville
About three to five weeks from demo to final walkthrough on most partial jobs. The longest single window is cabinet and counter lead time, which can run two to four weeks by itself. Call (844) 797-4808 for a firm timeline on your specific kitchen.
If plumbing, gas, or electrical is moving, yes. If you’re only replacing surfaces (paint, cabinets, counters, backsplash) without moving systems, a permit is often not required. We pull permits and pass inspection on every job that requires one, and we’ll tell you upfront which category yours falls into.
Yes, and it’s the most common path we see. Keeping sinks, drains, and appliances in place cuts the cost significantly because you avoid rough-in work and inspection delays. On a small kitchen, cabinets, counters, and backsplash can be refreshed without touching the mechanicals.
Typically $9,000 – $20,000 for a small kitchen, or $14,000 – $45,000 for a broader partial remodel. Kitchen island installation adds $3,000 – $10,000 if you want one. We quote in writing, front to back, with no change orders once the scope is set. Call (844) 797-4808 for an exact number.
Every small or partial kitchen remodel we do is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
Get a Free Estimate on Your Duncanville Kitchen
Call (844) 797-4808 to schedule a free on-site estimate. A live person answers 24/7, and we’ll walk your kitchen, talk through what can stay and what should go, and send a line-item quote in writing. Then you decide, with no pressure and no surprises.
Written by the team at Groundwork Construction Co.