Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Carrollton, TX: What the Job Actually Involves
Replacing vanities, tile and fixtures in Carrollton, TX usually runs $9,000 – $28,000 and takes two to four weeks once materials are on site. The job means demoing the old vanity and floor/wall tile, roughing in new supply and drain connections if the layout changes, setting the new vanity top and cabinet, then installing tile, fixtures and finishes. Call (844) 797-4808 and we’ll walk your bathroom and give you a free written estimate line by line.
How We Handle Vanities, Tile & Fixtures, Stage by Stage
Most of the surprises in this work hide behind the drywall. So we sequence the job around what we find, not what a showroom brochure assumes.
Stage 1: Site walk and tear-out (day 1 – 2). We pull the old vanity, mirror, toilet and any tile that’s coming out, then open the wall where the new plumbing and electrical will land. In Carrollton’s older ranch homes, this is where we sometimes find original polybutylene supply lines or a branch circuit that won’t carry a new vanity outlet and heated towel bar. You decide then whether to replace just the run or upgrade the whole bathroom circuit.
Stage 2: Rough-in and inspection (day 2 – 4). Plumbers relocate the drain and supply stubs for the new vanity footprint; our electrician sets a GFCI circuit for outlets, sconces and any under-cabinet lighting. If we’re moving plumbing or adding a circuit, the city inspects the rough-in before anything gets closed up. You sign off on fixture placement at this point, because moving a drain stub later is expensive.
Stage 3: Substrate and waterproofing (day 5 – 6). Cement board goes up on the wet walls, a bonded waterproofing membrane goes over it, and the floor gets leveled or patched. Skim-coating and leveling matter more than people expect: a 1970s slab that’s drifted will telegraph through a large-format tile if we don’t flatten it first.
Stage 4: Tile setting and grout (day 7 – 11). Floor tile, shower walls or tub surround, then a 24-hour cure before grout. You’ll have already chosen grout color and whether you want a matching or contrasting edge profile. This is also when the vanity gets set and leveled.
Stage 5: Fixtures, vanity top and final trim (day 12 – 15). Faucet, drain, shower valve and trim, toilet reset, mirror and hardware. We caulk, clean and walk the room with you. Any punch item gets written down and scheduled before we consider the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Vanity cabinet type. Furniture-grade plywood or a stock MDF box. The plywood version costs more but holds up in a humid bathroom; stock MDF is fine for a guest bath that stays dry. KraftMaid and Kohler both make solid lines we source.
- Vanity top material. Quartz holds up best around water and resists staining; granite is durable but needs periodic sealing; cultured marble is the budget option and can chip at the edges.
- Floor tile. Porcelain is the practical default – dense, water-resistant, and it survives North Texas slab movement better than natural stone. Marble looks great and costs more to maintain.
- Wall tile and shower surround. Large-format porcelain (12×24) is fast to set and easy to clean; smaller subway tile gives more traditional character and costs a bit more in labor because of the grout joints.
- Fixtures. Moen and Delta make reliable cartridges and trim at mid-range prices; American Standard toilets are a solid value pick. Spend the money on the shower valve – that’s the part you don’t want to replace twice.
- Sink and faucet style. Undermount sinks are easier to wipe down; a Blanco or similar undermount in the right size matches the counter cutout cleanly.
What Vanities, Tile & Fixtures Costs in Carrollton, TX
For a bathroom vanity, tile and fixture refresh in Carrollton, expect $9,000 – $28,000. The low end covers a same-layout vanity swap with mid-grade porcelain tile and stock fixtures; the high end covers a full gut with relocated plumbing, custom cabinetry and premium tile.
What pushes the number up:
- Layout changes. Moving the drain or supply lines adds plumbing rough-in and inspection time.
- Electrical scope. A new GFCI circuit, sconces or heated floor mat requires an electrician and a permit.
- Tile selection and square footage. Large-format or natural stone costs more per square foot and takes longer to set.
- Condition behind the wall. Cast-iron drains, polybutylene supply lines or water damage from a past leak turn a tile job into a plumbing repair.
- Cabinet grade. Stock vs. semi-custom vs. custom moves the vanity line by a meaningful margin.
A written estimate should show demo, rough-in, waterproofing, tile, cabinetry, fixtures and cleanup as separate line items. It should state the tile allowance and fixture allowance so you know what a mid-grade pick costs versus an upgrade. Permits are typically pulled by us and included; if your estimate doesn’t say so, ask.
See the difference
Before
After
Before
After
Before
AfterWhat Carrollton Homes Specifically Do to This Job
Carrollton’s construction market is dominated by tear-down-and-rebuild and major remodel work in its original 1970s – 80s subdivisions, particularly around the 75006 and 75007 ZIP codes, where lot values now exceed the aging ranch homes on them. That means most vanities, tile and fixtures work here lands inside a permitting-driven remodel, not a cosmetic refresh – and matching new construction to mature HOA deed restrictions is part of the job, not an afterthought.
In the older neighborhoods off Josey Lane and Belt Line Road, we routinely find original 1970s aluminum branch wiring and polybutylene supply lines behind the drywall. Both have to be replaced before inspection, which can turn what you thought was a tile job into a whole-bath electrical or plumbing upgrade. North Texas expansive clay soils also keep us honest: a slab that has shifted will crack tile if we don’t level the substrate first, and the 2021 freeze left a lot of Carrollton homes with pipe damage that shows up years later as a soft spot behind the vanity.
Serving Carrollton, TX – Our Local Coverage Area
We serve Carrollton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Carrollton
Two to four weeks from demo to final walkthrough, depending on tile complexity and whether plumbing or electrical is relocated. Material lead times can add a week or two. Call (844) 797-4808 for a firm timeline after we see the room.
Yes, if you’re moving plumbing, adding electrical or changing the layout; a straight cosmetic swap often doesn’t require one. We handle permitting as part of the job and keep the inspections on schedule. Call (844) 797-4808 and we’ll tell you what your scope needs.
Yes – a same-layout vanity swap is one of the most common jobs we do, and it stays in the lower half of the price range. If the old vanity footprint matches the new one, no rough-in is needed. Call (844) 797-4808 to talk through your layout.
Most jobs land between $9,000 and $28,000. The low end covers a stock vanity, mid-grade porcelain tile and standard fixtures; the high end covers relocated plumbing, custom cabinetry and premium tile. Call (844) 797-4808 for a written line-item estimate – free.
Every vanities, tile and fixtures project is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on tile, plumbing rough-in and cabinetry installation. Call (844) 797-4808 with questions on coverage.
Get a Free Estimate for Vanities, Tile & Fixtures in Carrollton
If your bathroom is due for new tile, a vanity that fits the room and fixtures that won’t drip, we’ll come out and price it. One of our team will walk the space, check the plumbing and electrical behind it, and put a written estimate in your hands – no surprises, and the number you see is the number you pay. We cover Carrollton and the surrounding area. Call (844) 797-4808 to schedule your free estimate, and if this is part of a full Bathroom Remodeling in Carrollton project, we’ll scope both together. Homeowners often pair this with Tile Roofing in Carrollton or Specialty Roofing in Carrollton, and our Bathroom Remodeling team handles the wider project when it’s time.
Written by the team at Groundwork Construction Co.