Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Carrollton, TX: What They Cost and How the HOA Review Works
Custom and geometric windows in Carrollton usually run $6,500 to $22,000 for a typical house, and the biggest variable isn’t the glass – it’s whether your HOA’s architectural review committee approves the style before anything gets ordered. Plan on four to eight weeks from first measurement to final inspection. Call (844) 797-4808 to book a free on-site estimate.
How our custom and geometric window process runs, stage by stage
Every Carrollton job follows the same five stages. Here’s what actually happens, when, and what you’ll be asked to decide.
Stage 1 – Measure and document (day 1, about 90 minutes)
We measure every opening, photograph the existing trim and brick returns, and note the wall thickness. On Carrollton’s 1970s brick-veneer ranches that thickness is usually consistent, but the original aluminum frames often sit slightly out of square, which we record now rather than discover at install. You don’t decide anything yet.
Stage 2 – HOA architectural review packet (days 2 to 5, then a waiting period)
This is the stage that trips up homeowners who order windows first and ask questions later. We pull your community’s deed restrictions and prepare the submittal: elevation drawings, the exact frame color in manufacturer finish codes, grid pattern, and glass spec. Most Carrollton HOAs take two to four weeks to return a decision, and a rejection means re-drawing and re-submitting, which is why we file before we buy.
Stage 3 – Final product selection and order (days 5 to 8)
Once the style is approved, you lock in the shape, the frame material, the glass package, and the interior finish. Lead times for true geometric units – arches, half-rounds, trapezoids, circles – run six to eight weeks on most lines, longer for Marvin and Andersen customs. Rectangular units in a standard line move faster.
Stage 4 – Install (one to three days, depending on count)
We protect floors, remove the old units, inspect the rough opening for rot or failed flashing, and set the new windows level and square. Geometric units take longer per opening because the framing has to be built to match the arc. No structural surprises on most jobs; if we find soft framing or a cracked header we stop and quote the repair in writing before continuing.
Stage 5 – Inspection and trim-out (final day, plus your city inspection)
Trim, caulk, and exterior flashing get finished, and we walk the job with you. If the scope required a permit, the city inspection follows. You get the signed-off paperwork and the warranty terms in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The custom and geometric window options you’ll actually choose between
- Frame material. Vinyl is the value pick – it holds up well in North Texas heat and doesn’t need paint, but the color palette is limited, which matters when your HOA specifies an exact trim shade. Wood-clad (Andersen and Marvin are the two we specify most) gives you a real wood interior and a much wider color range; figure 25 to 40 percent more. Aluminum is strong and slim but conducts heat.
- Shape and glazing. A half-round or arch in a standard line costs less than a true radius built to your opening. Arched transoms over rectangular units are the most common ask in Carrollton’s PUD neighborhoods. Curves and trapezoids add fabrication cost and lead time.
- Glass package. Low-E with argon is the baseline for Texas sun exposure. Add laminated glass on west and south faces if you want impact resistance and quieter rooms; it’s a meaningful upcharge per opening.
- Grid pattern. Colonial, prairie, or no grid at all. This is the single most common HOA sticking point, because a grid change alters the look of the whole facade.
- Interior finish. Paint-grade pine versus stain-grade oak or cherry on the trim and jamb extension. Stain-grade costs more and needs a finish schedule agreed up front.
What Custom & Geometric Windows costs in Carrollton, TX
Most Carrollton homeowners spend between $6,500 and $22,000 on custom and geometric window work. A single specialty arch or circle adds $900 to $2,400 on its own. Here’s how the number breaks down.
| Line item | Typical range |
|---|---|
| Standard rectangular replacement (per opening) | $450 – $1,100 |
| Arched or half-round custom unit (per unit) | $900 – $2,400 |
| Trapezoid or custom radius fabrication | $1,400 – $3,800 |
| Wood-clad upgrade over vinyl (whole job) | +25% – 40% |
| Laminated impact glass (per opening) | +$180 – $450 |
| Permit and inspection fees | $150 – $500 |
| Framing repair if rot is found | $300 – $1,200 |
What pushes a job to the high end: the number of true radius units, wood-clad over vinyl, impact glass, and any rot or out-of-square framing hidden behind the old trim. What keeps it low: standard shapes in a vinyl line, fewer openings, and a straight rectangular swap.
Our written estimate lists every opening, the unit spec, and the labor separately, so you can see exactly where the money goes. Upfront pricing, no surprises. What’s typically not included in a window quote is anything the inspection turns up – failed flashing, rotted sheathing, or a header that needs sistering. We quote those in writing before touching them.
See the difference
Before
After
Before
After
Before
AfterWhat Carrollton homes specifically do to this job
Carrollton’s construction market is dominated by tear-down-and-rebuild and major remodel work in the original 1970s and 1980s subdivisions, especially around 75006 and 75007, where lot values now exceed the aging ranch homes sitting on them. That changes window work here in ways it doesn’t elsewhere. Contractors spend more time on permitting-driven rebuilds and on matching new construction to mature HOA deed restrictions than on greenfield building, so a window submittal in Carrollton has to satisfy a committee that has seen every color and grid pattern in the book.
In the older neighborhoods off Josey Lane and Belt Line Road, we regularly open a wall and find original 1970s aluminum branch wiring or polybutylene supply lines. That doesn’t stop a window job, but it does mean if you’re planning to pair this with a larger remodel, those items have to be replaced before an inspection passes. The expansive clay under most of these lots also moves; on a 40-year-old brick ranch, window openings sometimes sit a quarter inch out of level, and the frame has to be shimmed and the flashing rebuilt carefully so water doesn’t follow the gap. For a wider project scope, see our Windows & Doors in Carrollton page.
Serving Carrollton, TX – Our Local Coverage Area
We serve Carrollton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Carrollton
Most Carrollton jobs take four to eight weeks from measurement to final inspection, with the HOA review and the fabrication lead time as the two big drivers. Installation itself is one to three days. Call (844) 797-4808 for a schedule that reflects your specific opening count.
Replacement windows in the same opening often don’t require a permit, but changing the size, adding a new opening, or altering structure does. We check the requirement for your address and pull the permit if one is needed. Call us and we’ll confirm for your street.
Yes, in nearly every case – a same-size replacement swaps the unit without touching plumbing or framing. Only when you enlarge an opening or add a new one does structure come into play, and that triggers a different scope and a permit. We’ll tell you which category your job falls into at the estimate.
One arched or round custom unit runs about $900 to $2,400 depending on shape and frame material. A trapezoid or true-radius piece can hit $3,800. Call (844) 797-4808 for an exact quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right – on top of the manufacturer’s product warranty. You get both in writing at the walkthrough.
Get a free custom and geometric windows estimate in Carrollton
We’ll come out, measure every opening, pull your HOA’s restriction language, and hand you a line-item written estimate with the spec for each unit. No pressure, no change orders later. Call (844) 797-4808 – a live person answers around the clock – to book your free estimate for Custom & Geometric Windows in Carrollton. Our Windows & Doors service covers the full scope, and we serve homeowners throughout Carrollton. If your project grows, homeowners often pair this with Concrete Driveways & Concrete Work in Carrollton or Asphalt Driveways & Resurfacing in Carrollton.
Written by the team at Groundwork Construction Co.