Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Glenn Heights, TX: What It Takes and What It Costs
Tile work in Glenn Heights usually runs $800 – $2,500 for a kitchen backsplash and $3,500 – $14,000 for tile flooring across a typical three-bedroom home, with full backsplash, tile, and flooring packages landing between $14,000 and $45,000 when counters, islands, or a bathroom are pulled in. Most single-room backsplash jobs are done in one to two days; whole-home flooring takes four to seven. Call (844) 797-4808 for a free on-site estimate, and we’ll measure the rooms and give you a line-item number before anyone touches a trowel.
How a Backsplash, Tile & Flooring Job Runs, Start to Finish
Tile work is the one part of a kitchen or bathroom project where the order of operations decides whether the finished wall is flat, the grout lines line up, and nothing needs to be redone. Here’s the sequence we follow on Glenn Heights jobs.
Stage 1: Measure, substrate check, and material order (day 0)
We take field measurements of every surface getting tile, then check what’s under it. On 2000s – 2020s slab-on-grade homes in Glenn Heights, that usually means pulling a piece of baseboard to see whether the floor is flat within tolerance and whether there’s a crack isolation membrane under the old tile. You decide tile size, layout (stacked, offset, herringbone), and grout color at this stage, because the order has a two-to-four-week lead time on special-order tile.
Stage 2: Demolition and prep (day 1)
For a backsplash, we remove the old tile or laminate strip and sand the drywall or backer board to a flat plane. For flooring, we pull old carpet, vinyl, or tile and grind the slab or re-screw the subfloor. This is where we find the surprises: a kitchen outlet that was never secured, a soft patch of subfloor near a sink, or a slab crack that needs a membrane. You approve any added work before we move on.
Stage 3: Layout and dry-fit (day 1 – 2)
Before a single tile gets thinset, we snap chalk lines and dry-lay a few rows so you can see the layout. On a backsplash, this is where you decide whether the outlet cutouts land in the middle of a tile or on a grout line. On floors, this is where we set the starting line so the tile disappears under the kitchen cabinets evenly on both sides of the room. Getting this wrong is what makes a job look amateur, and it’s why we take an extra hour here.
Stage 4: Set, grout, and seal (day 2 – 5, depending on scope)
Tile goes down or up with the right thin-set for the material (modified for porcelain and glass, unmodified for natural stone). Grout goes in after a 24-hour cure, then a penetrating sealer on natural stone and a quality grout sealer on everything else. Floors get a full 24 hours of no foot traffic and 72 hours before heavy furniture, which we tell you up front so you can plan around it.
Stage 5: Trim, caulk, and final walk (day 5 – 7)
Backsplash edges get finished with matching trim or a schluter strip. Baseboards go back on the floors. Then we walk the job with you, tile by tile, under good light, and anything that fails the straightedge or level check gets fixed before we call it done. That walk is backed in writing by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Tile and Material Choices That Decide Your Result
Every backsplash and flooring decision comes down to trade-offs between cost, durability, and how it holds up in a Texas house. Here’s the honest version.
- Porcelain vs. ceramic: Porcelain costs 20 – 40% more per square foot but handles moisture and temperature swings better. In a Glenn Heights kitchen or bathroom, porcelain is usually the right call.
- Large-format vs. mosaic: Large-format tile (12×24 and up) means fewer grout lines and a modern look, but it needs a flatter substrate and costs more to set. Mosaic sheets are easier to install but show more grout.
- Natural stone: Travertine, marble, and slate look great but need sealing every 12 – 24 months. Budget for that maintenance or skip stone in a busy kitchen.
- Backsplash height: A standard 18-inch backsplash is the budget choice. Full-height (up to the cabinets) adds 30 – 50% to the tile area but is what most buyers want now.
- Grout choice: Sanded vs. unsanded, and epoxy grout for wet areas. Epoxy costs more upfront and never needs sealing, which is worth it behind a range or sink.
- Underlayment: Schluter-Ditra or a comparable uncoupling membrane under floor tile helps isolate the slab movement North Texas clay is famous for. Skipping it can open grout lines within two summers.
What Backsplash, Tile & Flooring Costs in Glenn Heights, TX
The number depends on square footage, material grade, and how much prep the substrate needs. Here are realistic Glenn Heights ranges we work from.
| Line item | Typical range |
|---|---|
| Kitchen backsplash (standard height) | $800 – $2,500 |
| Kitchen backsplash (full height) | $1,400 – $3,200 |
| Floor tile (per room, 150 – 250 sq ft) | $1,800 – $5,500 |
| Whole-home tile flooring (1,500 – 2,200 sq ft) | $8,000 – $22,000 |
| Bathroom floor + shower tile | $3,500 – $9,000 |
| Full kitchen tile package (backsplash + floor) | $4,000 – $12,000 |
What pushes a job to the high end: large-format or natural stone (materials cost more), significant substrate repair, moving an outlet or plumbing line, a complex layout like herringbone, and floor area over 2,000 square feet. A straightforward backsplash and a standard bathroom floor usually stays near the low end.
Your written estimate shows the tile square footage, the material allowance, prep and demo, setting materials, grout and sealer, and the workmanship line. It doesn’t include hidden slab issues (we price those after we open the floor) or furniture moving beyond a single room. No-hassle upfront pricing means the number we quote is the number you pay, unless you ask for a change.
See the difference
Before
After
Before
After
Before
AfterWhat Glenn Heights Homes Specifically Do to Tile Work
Glenn Heights is a young city with mostly 2000s – 2020s brick-veneer subdivisions on slab-on-grade, which means we’re rarely pulling up 40-year-old tile over a bad subfloor. The bigger issue here is the blackland clay underneath.
That expansive clay swells and shrinks hard between wet and dry seasons, and a slab that moves even a fraction of an inch will open grout lines and crack tile that wasn’t set over an uncoupling membrane. We see it most on homes built in the early 2000s along the IH-35E corridor, where the original builder used a direct-bond tile over slab. The fix is isolation membrane under any new floor tile, which is worth the small cost. On the backsplash side, most Glenn Heights homes we work on have drywall directly behind the kitchen wall, so we add a cement backer board for any tile in a wet zone.
Permit-wise, a cosmetic backsplash or a floor tile swap generally doesn’t require one, but if your tile job is part of a larger scope that touches plumbing or electrical, that work does get permitted and inspected. If your scope extends into cabinets or counters, that’s where our Kitchen Remodeling in Glenn Heights page covers the fuller picture. We cover the whole of Glenn Heights, from the newer infill lots to the older rural-style tracts off the corridor.
Serving Glenn Heights, TX – Our Local Coverage Area
We serve Glenn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Backsplash, Tile & Flooring in Glenn Heights
A kitchen backsplash alone takes one to two days. A whole-floor tile job takes four to seven days, and a combined kitchen-plus-bath scope usually runs seven to ten. Add two to four weeks if you’re special-ordering tile, which we schedule around.
Cosmetic tile replacement typically doesn’t require a permit, but any electrical or plumbing you relocate during the job does. We pull the permits that apply and schedule the inspections, and we’ll tell you up front what’s needed.
Yes, in most cases. If your current layout stays put, we cut openings around existing boxes and outlets. If you want to add an outlet or move one, that’s a small electrical job we handle as part of the scope.
Typically $800 – $2,500 for a standard run and $1,400 – $3,200 for a full-height installation, depending on tile material and substrate condition. Call (844) 797-4808 for an exact quote – estimates are free.
Every job is covered by the 730-Day Done Right Promise. If anything fails due to workmanship, we come back and make it right. That’s a written commitment, not a handshake.
Homeowners often pair a backsplash and floor tile refresh with Vanities, Tile & Fixtures in Glenn Heights or a Tub-to-Shower Conversion in Glenn Heights when the bathroom’s being refreshed at the same time. Our Kitchen Remodeling team handles the cabinets and counters that tie into a backsplash layout, and we source tile and fixtures through established brand partners like CGI and CWS where it fits the budget.
Get a Free On-Site Tile and Flooring Estimate
Call (844) 797-4808 for a free on-site estimate on backsplash, tile, and flooring work in Glenn Heights. We’ll measure the rooms, walk the substrate with you, and hand you a written line-item quote before any work starts. Calls are answered by a live person 24/7. Upfront pricing, no surprises, and a 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co.