Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Glenn Heights, TX: What It Takes and What It Costs
Asphalt Driveways & Resurfacing in Glenn Heights, TX typically runs $3,500 to $9,000 for new asphalt paving, and a full driveway replacement lands between $5,000 and $14,000. A new asphalt drive is usually a two-day job: excavation and base on day one, paving and compaction on day two, then a short cure before you park on it. Call (844) 797-4808 for a free on-site estimate.
What makes Glenn Heights different from a typical asphalt job is the land underneath. A lot of these properties are acreage tracts and newer infill builds, so the driveway is often long, sometimes shared, and always sitting on blackland prairie clay that moves with the weather. That changes how we build the base, not just how we pour the surface.
How we build an asphalt driveway in Glenn Heights, step by step
About half the asphalt work we do out here isn’t a simple repave. It’s a real build on a long service drive, and the sequence matters more than the finish coat.
Step 1: Site walk and grade check (day 1, about an hour)
Before anything gets torn up, we walk the run and check the slope away from the house and any outbuildings. On Glenn Heights acreage, that means watching where water sheds off a detached shop or garage pad and making sure the drive doesn’t push it back toward the slab. You’ll decide on the layout, width, and whether you want a wider apron for trailers or heavy trucks.
Step 2: Excavation and subgrade prep (day 1, most of the day)
We strip the topsoil and shape the subgrade. On infill lots in Glenn Heights this is where the surprises live – old fence lines, ag debris, and the occasional buried stock tank from when this was ranch land. We remove what we find and bring in select fill, then compact it in lifts. You’ll hear about any surprise before we haul anything extra in, since it affects the number.
Step 3: Base and drainage (day 2, first half)
A compacted crushed-stone base goes down over the subgrade, and we set the drainage so water leaves the drive instead of pooling on it. On clay that swells and shrinks between wet and dry seasons, this stage is what keeps the asphalt from cracking in year three. The finished base depth depends on whether the drive carries just a car or a loaded work truck.
Step 4: Paving and compaction (day 2, second half)
Hot-mix asphalt goes down and gets rolled to density while it’s still workable. For a resurface over sound existing asphalt, this is really the whole job – a tack coat, a leveling course where needed, and a fresh wearing surface. You’ll choose the mix and thickness here, and we’ll tell you plainly if the old base won’t hold.
Step 5: Cure and final walk (a few days)
Asphalt cures over several days depending on weather. You can usually drive on it after a day or two, but we ask you to keep heavy loads off it a bit longer. We do a final walk with you and note the start of the 730-Day Done Right Promise in writing. If something’s off in the first two years, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for your Glenn Heights driveway
Asphalt isn’t one product. Here’s what actually comes up on a Glenn Heights job, and the honest trade-off of each.
- New asphalt over a fresh base – the full build, best when the subgrade is bad or the drive is new. Highest cost but the longest life. Suits new infill lots and acreage drives where you’re starting from raw ground.
- Resurface over sound asphalt – a new wearing coat over existing pavement that’s still solid. Cheaper and faster, but only works if the base underneath is holding. If the old asphalt is alligator-cracked, resurfacing just buys you a couple of years.
- Hot-mix vs. warm-mix – hot-mix is the default for durability and costs a bit more. Warm-mix can work in cooler weather but we rarely push it on a Texas summer job.
- Thickness – a residential drive carrying cars is a different spec than one taking a loaded trailer or work truck on an acreage lot. Thicker costs more but resists rutting on heavy-use drives.
- Edging and aprons – concrete or stone edging holds the asphalt edge together and keeps it from raveling. Worth it on a long drive; optional on a short one.
When the driveway is part of a wider exterior project, we fold it into our driveway & pavers service so the grading, drainage, and paving line up as one plan instead of three separate contractors guessing at each other’s work.
What Asphalt Driveways & Resurfacing costs in Glenn Heights, TX
Here’s the range up front: most Glenn Heights asphalt jobs land between $3,500 and $9,000 for new paving, and a full replacement runs $5,000 to $14,000. Resurfacing a sound existing drive is usually less than a full replacement, and the fixed price you get in writing is the price you pay – no change orders for “surprises.”
Five things push a job toward the low or high end:
- Length and width of the run – an acreage service drive is several times the square footage of a tract-home apron. This is the biggest single factor.
- Condition of the existing base – a resurface over solid asphalt is cheap; tearing out a failed base and rebuilding it adds real cost.
- Subgrade surprises – old fence lines, debris, or bad clay that needs hauling off and replacing.
- Thickness and mix spec – heavy-use drives carrying trucks need more material than a car-only drive.
- Drainage and grading – adding culverts, swales, or regrading to move water off clay is its own line item.
A written estimate from us breaks these out line by line so you can see what you’re paying for. What it won’t hide is the disposal of old asphalt, base material, and permits – if any are required, they’re in the quote, not added later.
See the difference
Before
After
Before
After
Before
AfterWhat Glenn Heights homes specifically do to this job
Glenn Heights sits on the IH-35E corridor between Dallas and Waxahachie, and the housing stock tells the story fast. You’ve got older rural-style homes on large unincorporated-feeling tracts sitting right next to tract subdivisions of brick-veneer homes built in the 2000s through the 2020s. That split is why asphalt work here skews toward longer service drives on acreage and ground-up builds on recently divided land, rather than the tear-out-and-replace work you’d see in an older inner-ring suburb.
The soil is the other half of it. This is blackland prairie clay that swells and shrinks hard between wet and dry seasons, so drainage grading and a properly compacted base aren’t optional – they’re what keeps a Glenn Heights driveway from cracking in its first few years. And because a lot of these lots were farm and ranch land a generation ago, excavation on an infill parcel routinely turns up old fence lines, ag debris, and the occasional buried stock tank. We plan for that, quote it honestly, and don’t let it turn into an ugly surprise mid-job. You can see the full range of exterior work we do across Glenn Heights if you want the bigger picture.
Serving Glenn Heights, TX – Our Local Coverage Area
We serve Glenn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Asphalt Driveways & Resurfacing in Glenn Heights
A new asphalt drive is typically a two-day build – excavation and base one day, paving and compaction the next – followed by a cure period of a few days before heavy use. Resurfacing a sound existing drive can often be done in a single day. Call (844) 797-4808 for a real timeline on your specific drive.
Permit requirements depend on your lot and whether the work touches the right-of-way, drainage, or an existing structure. We handle the permit question as part of the estimate so you’re not left chasing it yourself. Call (844) 797-4808 and we’ll tell you what applies to your property.
Yes, if the existing asphalt is still structurally sound. Resurfacing puts a fresh wearing coat over a base that’s holding, which is faster and cheaper than a full replacement. If the base has failed, a resurface only delays the problem, and we’ll tell you straight which one you’re looking at.
Resurfacing generally costs less than a full replacement, which runs $5,000 to $14,000 here, and new asphalt paving runs $3,500 to $9,000. The exact figure depends on length, base condition, and drainage. Call (844) 797-4808 for an exact quote – estimates are free.
Every asphalt job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, in writing, on every job. It’s the reason a lot of Glenn Heights homeowners pair a new drive with a bigger project like a New Detached ADU in Glenn Heights or a Junior ADU & Interior Conversion in Glenn Heights, so the grading, drainage, and paving all get handled by one crew under one guarantee.
Get a free asphalt driveway estimate in Glenn Heights
If you’re weighing a new asphalt drive or a resurface on a long Glenn Heights service drive, start with a free on-site estimate. Call (844) 797-4808 and a live person answers, day or night. We’ll walk the property, check the base and drainage, and hand you a written line-item quote – the number you see is the number you pay. Most jobs are scheduled without the back-and-forth that eats up a week.
Written by the team at Groundwork Construction Co.