A Groundwork company - serving Dallas, TX
Custom & Geometric Windows in Coppell, TX | Groundwork Construction Co. of Dallas

Custom & Geometric Windows in Coppell - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Custom & Geometric Windows in Coppell, TX: What the Job Actually Involves

Custom and geometric windows in Coppell usually means a shaped opening – arch-top, half-round, trapezoid, angled gable, or a full eyebrow wall of glass – built to a specific wall, not picked from a catalog size. Plan on 2 to 5 weeks from template to final trim on a typical single-unit job, and budget roughly $1,200 – $4,500 per custom unit depending on shape, glazing, and what has to be reframed behind it. Call (844) 797-4808 for a free on-site estimate.

Call (844) 797-4808

How We Build and Install Custom & Geometric Windows, Start to Finish

Shaped windows fail or succeed on the template, so we don’t rush the front end. Here’s the real sequence on a Coppell job.

Stage 1 – Site visit and field measure (day 1, about 90 minutes)

We measure the rough opening, check the wall for out-of-plumb framing, and look at how the shape sits against the roofline and the brick coursing. You’ll decide then whether we’re keeping the existing opening footprint or cutting a new one – that single decision drives the rest of the job and the budget.

Stage 2 – Template and design review (days 2 – 7)

For arched and trapezoid units we build a physical or digital template of the opening. If your home sits in an established Coppell neighborhood under an HOA architectural review, this is the package that goes in front of the board: elevation drawing, glass spec, grille pattern, exterior color. Approval can add a week or two, so we start it early. You’ll pick the material, finish, and glazing at this stage.

Stage 3 – Manufacturing (2 – 4 weeks, the long pole)

Custom shapes don’t come off a shelf. Andersen and Marvin both build to order for arched and geometric units, and lead times move with glass options. We give you the confirmed ship date before we schedule demolition, not after.

Stage 4 – Demolition, framing, and install (1 – 2 days on site)

We pull the old unit, square and shim the opening, add or replace framing for the new shape, and set the window with proper flashing and sealant detail at the head and sill. On a brick exterior this is where sloppy work shows up first – a poorly flashed arch leaks within two seasons.

Stage 5 – Trim, seal, and final walkthrough (same day to next day)

Interior trim, exterior caulk and touch-up, glass cleaned, and a walkthrough where we open and close everything with you in the room. You sign off, and the install is covered by the 730-Day Done Right Promise.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between for Custom & Geometric Windows

  • Wood-clad (Andersen, Marvin): real wood inside, aluminum or vinyl cladding outside. The best look for a shaped window in a brick traditional, and the most expensive. Suits Coppell homes where the window is a design feature, not just an opening.
  • Vinyl: the value pick, good thermal numbers, but arched vinyl units come in fewer radii and can’t be painted. The trade-off is shape flexibility.
  • Fiberglass: holds paint, resists moisture, and handles temperature swings well. Middle of the price range.
  • Glazing: dual-pane low-E is standard here; laminated glass adds impact resistance and a bit of cost. North Texas summers make the low-E coating worth the money.
  • Grille pattern: true divided lites versus simulated. True divided lites cost more and look correct up close on a historic-style Old Town elevation.
  • Finish: factory finish versus field paint. Factory finish lasts longer on an exterior arch.

Hardware matters less on a fixed shaped unit, but if the geometric window is paired with an operable door or casement nearby, we spec quality handles – Delta and American Standard hardware both hold up well – because cheap hardware is the first thing to fail.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Custom & Geometric Windows Cost in Coppell, TX

A single shaped custom unit in Coppell runs $1,200 – $4,500 installed. A full run of geometric windows on one elevation, or a set tied to a second-story addition, lands $6,000 – $18,000. Those are real numbers, not a teaser – and here’s what moves a job from the low end to the high end.

  • Shape complexity: a half-round is straightforward; a compound trapezoid or an eyebrow arch is not.
  • Opening condition: reusing the existing rough opening is cheaper. Cutting new framing, reframing for a wider shape, or repairing rot behind the old unit pushes cost up.
  • Material grade: vinyl sits at the bottom, wood-clad at the top.
  • Permit and inspection scope: a like-for-like replacement may not need a permit; a new opening or a structural change does.
  • Exterior finish: brick repair, stucco patching, or new trim around a custom shape adds labor.

A written estimate from us is line-item: unit, framing, flashing, trim, permit, labor. What it doesn’t include is anything hidden until demo reveals it – rotted sheathing, missing framing, or a header that has to be rebuilt. We flag those before we proceed, not after. Upfront pricing, no surprises.

What Coppell Homes Specifically Do to This Job

Most of the housing stock we work on in Coppell is 1980s-to-2000s brick traditional on generous suburban lots, with a steady flow of custom rebuilds replacing originals. That mix matters: a shaped window going into an original brick traditional has to match a roofline and brick course that was never designed for it, while a tear-down rebuild has more freedom but has to answer to stricter city design standards and HOA architectural review boards that scrutinize every roofline, brick color, and setback. In Old Town, new two-story builds on narrow lots often have to match the original ranch scale and front setback or the project stalls in design review – so the window elevation gets reviewed before we order glass. The North Texas clay soil underneath also matters. Cyclical foundation movement means the rough opening may not stay perfectly square, and we account for that in the template rather than shimming a shaped unit into a crooked hole. If the window work is part of a larger exterior project, homeowners often pair this with Concrete Driveways & Concrete Work in Coppell, and sometimes Asphalt Driveways & Resurfacing in Coppell. We cover Coppell and the surrounding communities, and if the window work is one piece of a bigger scope, our Windows & Doors service is the wider picture, with the full Windows & Doors in Coppell page covering every option under that roof.

Serving Coppell, TX – Our Local Coverage Area

We serve Coppell and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked About Custom & Geometric Windows in Coppell

Why Coppell Chooses Groundwork Construction Co. of Dallas

We set the standard for custom & geometric windows in Coppell.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Coppell

Getting your custom & geometric windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your custom & geometric windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local custom & geometric windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Coppell Customers Say

Trusted by homeowners across Coppell and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Custom & Geometric Windows in Coppell?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Coppell.

(844) 797-4808

Request a Free Estimate in Coppell

Tell us about your custom & geometric windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch