Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Dallas Homeowners
If your windows fog up on the inside every July, or your patio door sticks so badly the family just stopped using it, you already know what the problem costs you in comfort and energy. Dallas homes take a specific beating: summer heat that drives heat gain through single-pane glass, spring hail that pits vinyl frames, and winter freezes that split door sweeps and let drafts through. Our technicians have up to 12 years of experience installing, replacing, and sealing windows and doors across the area, and we quote the whole job upfront so the number you see is the number you pay. Call (844) 797-4808 and a live person answers, day or night.

What Our Windows & Doors Service Includes
Window Installation
Full-frame window installation is for new openings and for tear-outs where the existing frame is rotted, out of square, or 30-plus years old. We handle the rough opening, flashing, sill pan, and interior trim so the window world “finish” and the builder side “waterproofing” are one job, not two contractors blaming each other. In Dallas, we always spec sill pans and backer-rod flashing because wind-driven rain during spring storms finds every gap a shortcut leaves behind.
Door Installation
Door installation covers entry doors, side doors, interior doors, and storm doors, including new framing when a previous installer cut the opening too wide. We set the door plumb and square, cut the strike and deadbolt cleanly, and check that it swings on a straight plane before we touch trim. Entry doors here should be steel or fiberglass with a good thermal break, since a hollow wood door facing west in Dallas bakes and warps within a couple of summers.
Window Replacement
Pocket replacement drops a new sash-and-frame unit into the existing opening without disturbing siding, and it’s the right call when the surrounding wall is sound. We measure every opening ourselves, because the biggest failure in replacement windows is a unit ordered from the homeowner’s rough tape measurement. Most Dallas replacements we do are on 1960s to 1990s ranch and bungalow stock where the original aluminum single-panes have given up.
Impact Windows & Doors
Impact-rated glazing is laminated glass bonded to a tough interlayer, so the window takes a strike without shattering into the room. Dallas sits well inland from the coast, so impact products here are usually chosen for hail resistance and noise reduction more than hurricane code. If your insurer credits wind or hail mitigation, we can talk through which ratings the carrier typically wants to see before you commit.
Energy-Efficient Windows
Low-E coatings, argon fill, and warm-edge spacers make a real difference in a Dallas summer, and we match the glass package to the window’s orientation. West-facing glass gets the most aggressive solar-control coating; north-facing glass can take a plainer package, and we won’t upsell what the wall doesn’t need. Ask us about the SHGC and U-factor on any unit we quote, and we’ll give you the actual numbers in writing.
Sliding & Patio Doors
Sliding patio doors are the single most common failure point we see in Dallas homes, mostly because the rollers and the threshold track wear out before the glass does. We replace rollers, re-track doors, and install new sliders where the frame is beyond repair. For families who use the patio year-round, a multi-slide or impact slider makes the doorway feel like part of the room.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with CWS and CGI products regularly, and we know exactly where those lines wear: CWS sliders often need new rollers and a threshold adjustment long before the frame fails, while CGI impact units tend to hold their seal well past a decade if the flashing was done right at install. When a homeowner calls us about a fogged CGI unit, we can usually tell from a photo whether it’s a seal failure or a venting issue, and that saves a service trip.
We also service ES Windows and ECO Window Systems equipment. ES Windows aluminum frames hold up well in Dallas heat but need the weep holes cleared every couple of seasons, and ECO systems are common on newer builds where a window replacement has to match existing factory trim. Whether you have a CGI, CWS, ES Windows, or ECO Window Systems unit, or any other make, we can diagnose it and quote the fix.
Signs You Need Windows & Doors Right Now
- Fog or condensation between panes. That’s a failed seal, and the glass won’t dry out on its own. A fogged unit loses most of its insulating value, so the room runs hotter and the AC works harder until it’s replaced.
- A door that sticks in summer and swings free in winter. Usually the frame or the hinge side is out of plumb, or the door itself has absorbed moisture. Left alone, the deadbolt stops lining up and the door becomes a security weak point.
- Drafts you can feel with your hand near the frame. Caulk and weatherstrip fail before the window does. Sometimes a re-seal is all it takes, and we’ll tell you honestly if that’s the case instead of selling you a whole window.
- Water stains or soft wood at the sill or threshold. This is the one that gets expensive. Rot at a sill means water has been getting behind the flashing, and it spreads into the wall if you let it go.
- Hail pitting or cracked frames after a spring storm. Dallas hail dents vinyl and cracks old aluminum. We inspect the glazing and frame together, because a crack in the frame often means the seal is compromised even if the glass looks intact.
Our Windows & Doors Process – Step by Step
- 1
Free estimate and on-site measurement. We come out, measure every opening ourselves with a laser, check the flashing and sill, and note anything that changes the scope. You get a written, line-item quote the same visit, not a number scribbled on a business card.
- 2
Product selection with real specs. We walk you through frame material, glass package, and ratings using the actual manufacturer data, so you can compare apples to apples. If a brand or product isn’t the right fit for a west-facing wall in Dallas, we’ll say so.
- 3
Written quote, fixed pricing. The quote lists units, labor, trim, disposal, and any framing repair found during measurement. That’s the number you pay, and we don’t add a change order mid-job for something we should have caught at estimate.
- 4
Installation day. Our background-checked, uniformed technicians protect floors and furniture, pull the old units, set the new ones with new flashing and sealant, and check every door’s swing and every window’s latch before they pack up.
- 5
Walkthrough and the 730-Day Done Right Promise. We test every opening with you, hand over the warranty paperwork, and leave the site clean. If anything isn’t right inside two years, we make it right, and that’s in writing.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Dallas?
A typical full-home window replacement in Dallas runs $4,500 – $15,000 depending on how many openings you have and whether the frames are sound enough for pocket replacement. If you’re stepping up to impact-rated windows, budget $8,000 – $25,000, because the laminated glass and heavier frames cost more per unit. A single entry door installation is usually a fraction of that, and sliding patio door replacement sits in the middle; we quote both as line items so you can see exactly where the money goes.

Several things move the price. The number and size of openings, whether the frame needs rebuilding, the glass package you choose, and second-story access all matter. Homeowners often overpay by ordering units off a rough tape measurement, then eating the cost of a re-order, or by buying “energy-efficient” glass with a package that’s wrong for the orientation. Our free estimate includes an on-site laser measurement and a written, line-item quote covering units, labor, trim, flashing, and disposal. You’ll see the number before you commit, with no surprise change orders once work starts.
Windows & Doors Near Dallas – Our Service Area
We serve Dallas and the surrounding communities, including Highland Park and University Park, plus Farmers Branch, Addison, Irving, Duncanville, Lancaster, DeSoto, Carrollton, Grand Prairie, and Glenn Heights. We schedule a free estimate at a time that works for you rather than making you take a day off, and we keep the same response standard across the whole area. If you want to know whether your street is covered, check our Dallas service area page or just call and ask.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Dallas
It covers the full exterior opening system: the window unit and frame, the flashing and sill that keep water out, the door slab, hinges, locks, and threshold. We handle new installation, replacement, impact-rated products, energy-efficient glass, and sliding patio doors. If a job touches the opening, we quote it as one scope so no one blames the other trade.
Most single-window replacements are done in a few hours, and a full-home window job typically runs two to four days depending on the number of openings and whether any framing needs repair. A single entry or patio door is usually a day. We give you the schedule in the written quote, and if we hit something unexpected behind the wall, we tell you before we keep going.
Window replacement in Dallas typically runs $4,500 – $15,000, and impact-rated installation runs $8,000 – $25,000. The range depends on the number and size of openings, the frame material, the glass package, and any rot or framing repair. Call (844) 797-4808 for an exact quote on your home; estimates are free and there’s no obligation.
Yes. We service CWS, CGI, ES Windows, and ECO Window Systems units for repair and replacement, and we can match existing factory trim on a replacement. We’ll diagnose from photos or an on-site visit to tell you whether a unit needs a new roller or a new window. If a part needs ordering, we give you the lead time upfront.
Yes. If a storm has cracked glazing, sprung a frame, or left a door not latching, call us and a live person will pick up, 24 hours a day. We’ll assess the damage, board or secure the opening if needed, and quote the repair or replacement. Dallas hail seasons keep us busy, so calling sooner gets you on the schedule earlier.
Every window and door project we complete is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right, for two years. That’s on top of the manufacturer’s product warranty, and we hand over both sets of paperwork at the walkthrough. Nothing is conditional on you having to chase us down.
Clear the floor and wall space around each window and door, move fragile items out of the work zone, and take down curtains and blinds. We protect floors and furniture with drop cloths, so you don’t need to move the heavy stuff. If you have pets, a closed room or a neighbor’s yard keeps them out of the way while doors are open.
Schedule Your Windows & Doors Service in Dallas Today
Whether it’s one fogged window or every opening on the house, our team will measure it, quote it in writing, and back the work with the 730-Day Done Right Promise. Call (844) 797-4808 for a free estimate and design consult, and a live person will answer. The number you see is the number you pay.
Written by the team at Groundwork Construction Co.